Are There Any Delorean Community Vendors Having A Black Friday Or Christmas Sale?

[DeloreanJoshQ]

Are There Any Delorean Community Vendors Having A Black Friday Or Christmas Sale?

[stevedmc]

Are There Any Delorean Community Vendors Having A Black Friday Or Christmas Sale?

I wish, but even if they did I'm trying not to spend any money on #16510 for a while other than gas and oil changes.

[Nicholas R]

I seem to remember DMCH having holiday specials in the past. I always get the little pamphlet that advertises for the DeLorean Christmas tree ornaments.

As far as black friday, I dont recall anything before but thats not to say it couldn't happen.

[DeloreanJoshQ]

I seem to remember DMCH having holiday specials in the past. I always get the little pamphlet that advertises for the DeLorean Christmas tree ornaments.

As far as black friday, I dont recall anything before but thats not to say it couldn't happen.

bttf.com had a black friday sale; I bought a flux cap....don't know about the others since this is my first xmas with my car.

[Byrne H&A]

We have been refurbishing and creating new componets for DeLoreans for twenty years and have extensive supply of new and used parts available. Tell us what you need or want and if in inventory, it's yours for half DMCH new price. PM if you wish. Byrne

[Delorean Industries]

We are having a black friday sale at Deloreanindustries.com

Mostly stainless parts and a few surprises.

[BTTF-1]

Awesome.

Ed:Headspin:

[Iznodmad]

Looking forward to these deals.......

[Nicholas R]

We are having a black friday sale at Deloreanindustries.com

Mostly stainless parts and a few surprises.

Manual transmission mounts? :D

[stevedmc]

We are having a black friday sale at Deloreanindustries.com

Mostly stainless parts and a few surprises.

It sounds like Josh beat DMCH at producing new binnacles. Thats hardly a surprise though.

[Delorean Industries]

It sounds like Josh beat DMCH at producing new binnacles. Thats hardly a surprise though.

No interior parts I'm sorry.

[Evildeli]

How about springs?:wink:

[stevedmc]

No interior parts I'm sorry.

Sorry but I couldn't resist. Binnacles would truely be a surprise.

[Ryan King]

Sorry but I couldn't resist. Binnacles would truely be a surprise.

I thought it was funny. :p

[stevedmc]

I thought it was funny. :p

I wonder if DMCH is going to be teasing everyone with binnacles for show and tell at DCS. I have a feeling they won't be ready by June 2012.

[Delorean Industries]

First Black Friday in shop special:

SPEC II upgrade performed to your engine at our facility.Rated at 198bhp. Regular price 5595.00. On sale Thursday and Friday for 4595.00 Includes the following:


-Spec I exhaust system with all components including aft heat shield and throttle shield
-Performance camshafts installed (most aggressive on the market)
-valve covers, timing cover, rear main seal and oil pan gasket replaced.
-new fuel injectors
-distributor cap, rotor, plugs and wires
-engine valley cleaned with y pipe o rings replaced
-water pump hose kit installed (4 hoses with clamps)
-Degrease engine
-Powder coat kit (intake manifold, w pipe, valve covers, timing cover, oil pan)

Other issues or parts required extra with prorated labor IE clutch kit, water pump, fuel system concerns etc.

[DeloreanJoshQ]

I believe Stephen Clark said that BTTF.NET Will be having a Black Friday sale on all of the website items

26% off?

[Fluxat88MPH]

What time does it start and will the black Fri items be on a separated from the regulare store page?


We are having a black friday sale at Deloreanindustries.com

Mostly stainless parts and a few surprises.

[tyb323]

First Black Friday in shop special:

SPEC II upgrade performed to your engine at our facility.Rated at 198bhp. Regular price 5595.00. On sale Thursday and Friday for 4595.00 Includes the following:


-Spec I exhaust system with all components including aft heat shield and throttle shield
-Performance camshafts installed (most aggressive on the market)
-valve covers, timing cover, rear main seal and oil pan gasket replaced.
-new fuel injectors
-distributor cap, rotor, plugs and wires
-engine valley cleaned with y pipe o rings replaced
-water pump hose kit installed (4 hoses with clamps)
-Degrease engine
-Powder coat kit (intake manifold, w pipe, valve covers, timing cover, oil pan)

Other issues or parts required extra with prorated labor IE clutch kit, water pump, fuel system concerns etc.

Dear lord I wish I had 4500 bucks... Time to start saving!

[DeloreanJoshQ]

What time does it start and will the black Fri items be on a separated from the regulare store page?

+1

[Delorean Industries]

Regular page tomorrow from noon to eight.


I will post a complete list in the morning of all items on sale. Almost all stainless items and a few surprises.

[DeloreanJoshQ]

Regular page tomorrow from noon to eight.


I will post a complete list in the morning of all items on sale. Almost all stainless items and a few surprises.

What are/Where are these located on the car?

-Fiberglass Body Support Brackets?
-Fuel Pump Blanking Plate?


Does the Starter Heat Shield work with your headers?

[jawn101]

I can't find the 'sale' section on the page :)

[Fluxat88MPH]

Yeah I am not seeing anything yet and its after noon.

[Delorean Industries]

Trying to correct sale price issues quickly. All effected items should have changed at noon. One moment.

[jawn101]

Trying to correct sale price issues quickly. All effected items should have changed at noon. One moment.

Not a problem :) Is there a list somewhere of what's on sale? Thanks for doing all this!

[Fluxat88MPH]

Keep us posted when its up and ready, thanks.

[Delorean Industries]

Here are the stainless items:

99691 stainless upper muffler bracket reg. $40.00 Sale price $25.00

111184 throttle shield stainless reg $25.00 Sale price $18.50

Spec I exhaust system reg. $2030.00 Sale price $15.85
(note installation if a purchased system is brought to us is still 2495.00 minus the system purchase price to keep things fair for owners having us perform the install)

1017641 Aft fascia heat shield reg $92.50 Sale $52.80

106341SS Manual transmission mounts reg 195.00 Sale price $135.00

100110SS License plate bracket reg #29.95 Sale price 25.00

106320SS clutch line bracket reg $12.50 Sale price $5.00

105845SS compressor bracket reg $15.50 Sale price $5.00

102272SS Wire bracket reg $27.95 Sale price $25.00

100773 Small AC idler pulley bracket Reg $38.50 sale price $25.00

100772 large pulley bracket reg $65.95 sale price $40.00

100919SS Axle flange kit reg $47.50 sale price $25.00

102618SS oil pan retainer kit reg $14.75 sale price $10.00

heatstockSS Exhaust heat shield stock reg $118.95 sale price $$89.00

Still not having luck with updating the prices on the site. I may have to update the entire store. Still trying to figure it out. If you want anything on this list just let me know and I will process it manually.


We are preparing to release an additional 173 components produced in stainless steel including throttle spools, headlamp buckets, our cat back exhaust system (preorder now for only 995.00), upper and lower rear control arms, rear carriers, lower radiator brackets, lower engine cover vent kits and many more exciting upgrades. We are literally producing the entire car in stainless replacing all mild steel components. I was hoping to have everything up for this but it just wasn't possible due to the fabricators schedule.

[Delorean Industries]

This is taking way longer then I thought it would. Once up these prices will be held through Sunday night due to the massive delay on my end.

Also.... On everything other then the SPEC I

ALL Stainless Works Products on our site are also 25% off through Sunday. Note free shipping does not apply to this offer.

[Fluxat88MPH]

Is this the complete list or is there more coming? Just wanted to make sure before ordering anything.

[jawn101]

Josh this is an amazing list and amazing news on your big plans! I can't wait to see where this leads!!

[Delorean Industries]

That is the complete list. If there is something else that you would really like or need just let me know and I can see if I can discount it. Most likely I can and I will then offer it at the same price for everyone.

Might as well make that the case with everything. If anyone wants anything just say so and I will see what I can do on making it a special.

[jawn101]

Stainless bumper letters and rear fascia studs? :)

[Delorean Industries]

Stainless bumper letters and rear fascia studs? :)

Fascia letters are a wash on this end so I can't lower the price. Inserts I can take down to 3.45 per insert.

[Fluxat88MPH]

SS dip stick tube?

[Ron]

Spec I exhaust system reg. $2030.00 Sale price $15.85
I'll take 10 of them!!! ;-)

[jackb]

Can you discount:
Water pump kit?
Front LCA support kit?
LCA poly bushings?

[stevedmc]

I'll take 10 of them!!! ;-)

It's a shame it isn't available on his website for that price.

[Delorean Industries]

SS dip stick tube?

Currently mass producing these. Will be ready the second week of December for half the price if you an wait.

[1batt4u]

I just saw your website Josh. I never knew you had all this stuff!! Last time I ever checked nothing was loaded on the website.

Looks like I'll be buying some stuff soon!!!

[Delorean Industries]

Can you discount:
Water pump kit?
Front LCA support kit?
LCA poly bushings?

Can't on any of these sorry.

[Delorean Industries]

I just saw your website Josh. I never knew you had all this stuff!! Last time I ever checked nothing was loaded on the website.

Looks like I'll be buying some stuff soon!!!

Nothing but problems with the site. What a pain! If you have any issues just get a hold of me directly and I will address it. 330 573 4129.

[Fluxat88MPH]

Ill take one when they are ready Josh. So if there are some items that are on the black Fri sale that I want to get and I am waiting on the ss dip stick how do you want to go about doing this, because I would like to combine shipping. Are you coming out to the DCO meeting in Jan this year? You can PM me.



Currently mass producing these. Will be ready the second week of December for half the price if you an wait.

[Delorean Industries]

You can just go ahead and order anything that you want now and I will cover the shipping on the dipstick tube when they are ready.

I will have an update on the tubes next week some time at the latest.

[Delorean Industries]

I"m really excited to have our next batch of products done. We are planning on doing an exploded view picture taken looking down on the shop floor with all of the stainless items we offer and their orientation on the car. Should be interesting to see our progress to this point.

While I now have hundreds of those little slotted brackets that go between the steering column mounting bolts and binicale that I will probably never sell through it just comes down to the point that I can say I recreated everything possible.

We will have a screaming deal on stainless coolant tube kits shortly too. We are now swagging and bending all of the 1 1/4 stainless tubing in shop. My goal is simple. Produce everything possible for the car in stainless and offer it to the community at the best price possible by manufacturing in quantity.

[DeloreanJoshQ]

I"m really excited to have our next batch of products done. We are planning on doing an exploded view picture taken looking down on the shop floor with all of the stainless items we offer and their orientation on the car. Should be interesting to see our progress to this point.

While I now have hundreds of those little slotted brackets that go between the steering column mounting bolts and binicale that I will probably never sell through it just comes down to the point that I can say I recreated everything possible.

We will have a screaming deal on stainless coolant tube kits shortly too. We are now swagging and bending all of the 1 1/4 stainless tubing in shop. My goal is simple. Produce everything possible for the car in stainless and offer it to the community at the best price possible by manufacturing in quantity.

"Like"

Thumbs Up Josh! Let's see these parts!

[1batt4u]

Was working on my car earlier. Josh, how about a S/S bracket that holds the Resistor for the coil, and light switch??

[jawn101]

Was working on my car earlier. Josh, how about a S/S bracket that holds the Resistor for the coil, and light switch??

I think he has those, but better yet - a COVER for that bracket and the coil pack! Some of the NCDMC guys have them that they made themselves and it looks great.

[Fluxat88MPH]

Made my order Josh, keep me posted on those dipstick tubes.



You can just go ahead and order anything that you want now and I will cover the shipping on the dipstick tube when they are ready.

I will have an update on the tubes next week some time at the latest.

[DeloreanJoshQ]

How about the bracket that holds all of the relays and fuse box? I belive mine has corrosion...

[Lenny]

Car Cover?