PDA

View Full Version : Experience with DMCMW and a little update on my project cars



StainlessBullet
11-24-2011, 03:04 AM
I just wanted to start this thread to tell about my experience with DMCMW and give alittle update on my two project cars.

I recently picked up 5788 from the DMCMW shop. I had every intention of restoring it myself when I bought the car, but my job just didn’t give me the free time as I was typically away from home 2 to 3 months at a time. Anyway, I dropped the car off in July and work was scheduled to start on the car in October / November. October rolls around and I get laid-off from work. I called Dave and told him the bad news, that I had been laid off and the restoration would have to be put-off until I could find another job. I was feeling pretty bad about the whole situation, since the car had been taking up space in his shop for a few months and now I was having to put the restoration off. He told me not to worry about the car being there at the moment and call him when I got a new job. He told me he would go ahead and do an inspection on the car so we would have a better idea what it’s going to take to restore.

Fast forward ‘till last week and I got an email from Dave saying the car was in a lot worse shape than what we had originally thought. He told me that it would cost anywhere from $30k to $50k to restore, and the car was going to cost more to restore than what it would be worth in the end. He told me that in his opinion that I should just pick the car up and part it out or restore it myself. We had tossed some ideas around and we came to the conclusion that I should just take 5788 and 2923, put them together and make one usable, drivable car instead of restoring both. 2923 is in bad shape body wise, but has a nice frame etc. 5788 on the other hand has a good body, but a bad frame. It’s only common sense to combine the two.

I really wanted to bring both back to the road, but it’s just not feasible. 2923 (the cornfield car) is going to be sacrificed for 5788.

On another DMCMW note, I spent the majority of a day with Dave and Julee and I have to say that they are some of the most down to earth and friendly people I have met. Not only did they not get mad about the car being there for so long and me having to pick it up without being restored, they waved the storage fees because of the situation!

They also helped me out in another way. I had borrowed my dads truck to pick up the car, as my truck is a big ‘99 Ram 4x4 that gets about 9mpg when it’s not towing something. About halfway into the trip the brakes on the truck start squealing. When I finally get to their shop the brakes are now metal to metal sounding. I didn’t bring any tools with me, so I asked Dave if he happened to know of a shop nearby that could put brakes on the truck. He said, sure, I’ll order the pads and can install them here if you like. GREAT! That’s my kind of service! Like I told Dave and Julee before I left, I’ll highly recommend them to anybody. If there is a job I need done to my car, it’s going to them. Thanks again Dave and Julee, you guys are awesome!

I’ll post another update on the car soon. I started tearing 2923’s frame down this past weekend.

sdg3205
11-24-2011, 03:10 AM
I like stories like this.

It makes me proud to be involved (in whatever capacity) in such a supportive community.

Dracula
11-24-2011, 03:16 AM
I'm sorry to hear that about your car, though I know how it goes. These things are so easy to spend money on.

If you do have to part out 2923, I know of a local guy who wants to do a complete rebuild on a car over a long period of time and wants a car that's basically an underbody and a clean title.

StainlessBullet
11-24-2011, 03:31 AM
I'm sorry to hear that about your car, though I know how it goes. These things are so easy to spend money on.

If you do have to part out 2923, I know of a local guy who wants to do a complete rebuild on a car over a long period of time and wants a car that's basically an underbody and a clean title.

Thanks Chad.

I was wondering how much of market there would be for an underbody with just a title and no frame. I’ve got a friend that owns a local movie car museum and he might be interested in the left over parts, but if he doesn’t want it I’ll give you a shout.

I already know I’m not going to need 2923’s underbody, panels, what’s left of the interior, auto transmission, motor, and quite a few other misc. parts. But I’m not selling anything until I have 5788 back on the road, just because I know how my luck goes. I’d hate to get to a point on the restoration that I realize I need a part, and I had it on the other car but sold it. :bash:

Michael
11-24-2011, 08:24 AM
Nice story indeed. Don't forget to keep 2923's title and vin plates...you can sell them to Houston. I don't know what they would be worth considering they can put another refurb.on the road with them, maybe a few hundred?

dmc4087
11-24-2011, 08:37 AM
Thanks Chad.

I was wondering how much of market there would be for an underbody with just a title and no frame. I’ve got a friend that owns a local movie car museum and he might be interested in the left over parts, but if he doesn’t want it I’ll give you a shout.

I already know I’m not going to need 2923’s underbody, panels, what’s left of the interior, auto transmission, motor, and quite a few other misc. parts. But I’m not selling anything until I have 5788 back on the road, just because I know how my luck goes. I’d hate to get to a point on the restoration that I realize I need a part, and I had it on the other car but sold it. :bash:

Is the frame the main problem on 5788? What are you stripping from the other car if you are left with all of the above?

stevedmc
11-24-2011, 01:08 PM
I'm thankful for DMCMW this Thanksgiving.

StainlessBullet
11-25-2011, 01:09 AM
Nice story indeed. Don't forget to keep 2923's title and vin plates...you can sell them to Houston. I don't know what they would be worth considering they can put another refurb.on the road with them, maybe a few hundred?

I'll probably sell the vin and title to whoever ends up buying the underbody. That way if they end up trying to build a car, at least that can register it.


Is the frame the main problem on 5788? What are you stripping from the other car if you are left with all of the above?

Dave told me that the frame on 5788 and nearly everything attached to it is rusted and pretty much junk. He said during the inspection he removed the front brake pads so the car would roll easier in his shop, a job that would normally take a few minutes and it took nearly an hour. He said this is the sort of thing I’m going to run into with every job on the car. He told me I would be much better off with a rolling chassis from another car, which is where 2923 will become useful.

Now I know some of you are wondering since 2923’s chassis is so good, why don’t I just restore 2923 instead. The underbody on 5788 is in better shape than on 2923. The stainless on 5788 is in good shape with no dents or dings (except for one small ding on the drivers door), unlike 2923 where nearly every panel has a least one minor flaw. The interior on 2923 is pretty much destroyed, and 5788 has an ok interior.

We separated the body and frame on 2923 some time ago and have slowly been refurbishing some of the components. I’m planning to refurbish what I can and replace what I can't. I need to replace / rebuild the brakes, install new fuel lines, accumulator, install new radiator, new suspension, shocks, etc. I’m going to use the motor from 5788, since Dave said it sounded pretty healthy. I’m also planning to use the 5-speed transmission from 5788, since 2923 is an automatic (never really cared for an auto).



I'm thankful for DMCMW this Thanksgiving.

:thumbup:

Dracula
11-25-2011, 11:12 AM
Nathan,
If that's the route you want to go with the title and underbody, let me know. I have a friend who I would be helping perform a complete restoration of the car and would be, in turn, keeping it on the road.

Dangermouse
11-28-2011, 01:49 AM
For us newer owners, could you recap the "cornfield" car story for us.

Must have happened just before I joined this august community.

StainlessBullet
11-28-2011, 02:42 AM
For us newer owners, could you recap the "cornfield" car story for us.

Must have happened just before I joined this august community.

:popcorn:

It all started back in 2008 when I was told by a friend of mine that he knew where a DeLorean was sitting abandoned in a field. Obviously I had to go and take a look. So that following day me and another friend drove about 15 miles from where I live to where this supposed DeLorean was sitting. I really had a hard time believing that it would be there. After driving in the area for about 20 minutes and still finding nothing, I gave my friend a call to see if he could give me better directions. He told me I was in the right area, but I needed to look for a long dirt farm access road and drive down it about a mile and a half. I finally found a road that looked like what he was describing and turned down it. After getting on the farm road I really thought it was going to be a dead-end lead. I couldn’t believe there would be anything at all down this road, let alone a DeLorean. The road led through some woods and then up a hill to a cornfield where the road curved to a house. I kept driving toward the field and when I finally went around the bend this is what I saw.

http://dmctalk.org/attachment.php?attachmentid=7092&d=1322460507

http://dmctalk.org/attachment.php?attachmentid=7096&d=1322460516

I couldn’t believe my eyes. It was exactly what I had been looking for, a project DeLorean. Of course I had all kinds of thoughts going through my head, who owns it, can I buy it, why is it here, etc. There was a house about quarter of a mile from where the car sat, so I figured that would be a good place to start. So I went and knocked on the door and this elderly lady came to door (think Grandma Walton), and I asked if she happened to own the car. She told me it was her late husbands car. She said he bought it in the early to mid 90’s and had planned to restore the car, but he was stricken with cancer and passed away before he could finish it. She said she never messed with it, and her sons/grandsons had zero interest in the car. It had sat there since he died (some two years before I came along). She then told me that she would be willing to sell it to me. I of course jumped at the idea and the rest is history. There is alot more to the story but that's the basic idea.

Here’s some other pictures taken of the car since I’ve owned it.

http://dmctalk.org/attachment.php?attachmentid=7095&d=1322460514

http://dmctalk.org/attachment.php?attachmentid=7097&d=1322460518

http://dmctalk.org/attachment.php?attachmentid=7088&d=1322460499

http://dmctalk.org/attachment.php?attachmentid=7087&d=1322460498

http://dmctalk.org/attachment.php?attachmentid=7093&d=1322460509

http://dmctalk.org/attachment.php?attachmentid=7089&d=1322460502

http://dmctalk.org/attachment.php?attachmentid=7094&d=1322460512

opethmike
11-29-2011, 11:25 AM
In one of your pictures, it shows the chassis rolled halfway out from the body, but then the wheels are blocked by the cinder blocks. I have to ask - how did you get it the rest of the way out?

StainlessBullet
11-29-2011, 04:21 PM
In one of your pictures, it shows the chassis rolled halfway out from the body, but then the wheels are blocked by the cinder blocks. I have to ask - how did you get it the rest of the way out?

We used two high-lift jacks to hold the car while we stretched a board across the blocks and then spread the blocks out. Look at the car in the background of the 7th picture down, you can see what I’m talking about.

The car was pretty light at this point, one of us could lift an entire side of the car.