Torque settings for water pump and Y-pipe????

[rundmc]

These values are nowhere I can see in the shop manual. Help is appreciated.

[DMC5180]

Torque values lubed with anti-seize compound
The y-pipe and Rear water pump cover housing are M7-1.00 9.6 ftlbs or (116) inlbs
The 3 water pump mounting bolts are M8-1.25 14 ftlbs or (169) inlbs

[rundmc]

Thanks!

[delorean928]

anyone has the torque for the 2 bolts of the thermostat housing? And the torque for the 4 bolts of the air intake assy? :)

[DMCMW Dave]

anyone has the torque for the 2 bolts of the thermostat housing? And the torque for the 4 bolts of the air intake assy? :)

O-ring seals. So they are very Light torques. According to page A:03:04 inlet manifold fixing bolts are 9 ft-lb. I'd assume the same on the thermostat housing.

[delorean928]

Thank you very much again Dave :)