Engine rebuild questions

[Alan]

I apologize. This isn't DeLorean specific but may still help local owners. I'm posting here instead of the open forum in hopes of getting more technical attention.

I live in Minneapolis. I'm helping a friend rebuild the top end of an '88 Iroc Z Camaro. I'm looking for recommendations for a machine shop to get the heads done.

Also, the exhaust manifolds are, I believe, cast iron and have a good layer of surface rust. People here do very well with refinishing engine parts. Any recommendations on refinishing those to withstand the heat?

I know these aren't DeLorean questions but you guys are who I expect to get good car information from. Thanks.

[timothymoore]

I apologize. This isn't DeLorean specific but may still help local owners. I'm posting here instead of the open forum in hopes of getting more technical attention.

I live in Minneapolis. I'm helping a friend rebuild the top end of an '88 Iroc Z Camaro. I'm looking for recommendations for a machine shop to get the heads done.

Also, the exhaust manifolds are, I believe, cast iron and have a good layer of surface rust. People here do very well with refinishing engine parts. Any recommendations on refinishing those to withstand the heat?

I know these aren't DeLorean questions but you guys are who I expect to get good car information from. Thanks.

just do an internet search for local machine shops and read the ratings you find . as for the exhaust manifolds, yes they are cast iron, i would just blast them with a bead blaster or glass bead and that will clean the rust, or you could have your friend buy a set of heat resistant headers. you can buy them cheap especially for the camaro. if that doesnt help, go to www.camaroforums.com , there are a ton of knowledgable people on there that can give great advice (not that there isnt anyone on here).

[Kenny_Z]

For the exhaust manifolds: http://www.youtube.com/watch?v=eWp7RVsqfiI

Stacey David does some interesting stuff.

[dmc6960]

The CarQuest Auto Parts right on Excelsior and Shady Oak Road in Hopkins has a machine shop I've used for several tasks. One of which was the head rebuild for my DeLorean's engine, before I had them rebuilt again for the port and polish at a racing shop.

[Alan]

Thanks for the input so far, everyone.

Jim, I was really hoping for input from you for a good local place. I know you've done good work and value your opinion. Thanks!

Alan