PDA

View Full Version : Electrical Battery Disconnect


Felix_29
03-07-2012, 07:52 PM
Hello, can anyone tell me the correct steps on how to disconnect the battery? A friend of mine at work is going to run some tests on it at work and I don't want to make a mistake. I assume the black cable needs to be disconnected first?

All the best,

Felix
congerz83
03-07-2012, 07:56 PM
It's really not that big a deal. The fact is, you can remove either 1st. But I would probably remove the NEGATIVE (black) cable 1st. It's been written that NEG off 1st is the propper way. Again, it shouldn't make that much difference.
sean
03-07-2012, 07:56 PM
Doesn't matter, disconnect either one.
Felix_29
03-07-2012, 08:06 PM
What tool do I need? Is it a flat head screwdriver?

Felix
sean
03-07-2012, 08:19 PM
What tool do I need? Is it a flat head screwdriver?

Felix

Depends on the bolt present. I've seen many now replaced with aftermarket battery bolts that require a socket/wrench, which could also be used on the OEM bolt.
Felix_29
03-07-2012, 08:34 PM
I got it out. It needed a 14mm socket.

Thanks,

Felix