Log in

View Full Version : Engine idle poll



thirdmanj
04-03-2012, 07:07 PM
So here's a little back ground. I've a 2 year old Stage II from DMCFL. My engine is still running, as best I can recal, as it did when I picked it up and drove it back to VA. Also it has a very "signature" lope when idling. I say signature because when my ship pulled into FL one time I was fortunate enough to get to go to Bonita Springs for the unveiling of a new-build (hold the arguments please) Stage II. When it fired up and sat there idling it loped, the same lope that mine had (at the time not Stage II) so I excitedly asked Stephen (yes that Steven) "what's that loping, what's wrong with it? Mine does the same thing" . "Oh nothing", he replied, "That's just the way they run, part of the mechanical fuel injection system."

I have to defend this lope constantly to critics. Some say it's a vacuum leak. I meanwhile rattle off the same story I just wrote here. So what is it I ask and, does your engine have that "signature PRV lope"? Again 1258 is a 2-2.5 year old Stage II from DMCFL.

Bitsyncmaster
04-03-2012, 07:16 PM
It's a common problem but not on all engines. Not saying mine never has any hint of it but 99% of the time it has none at all. Hence I voted non at all.

Playing with the curb idle setting can correct it on some cars. That makes the idle speed motor (ISM) run more open or less open and it may perform better there.

Chris Burns
04-03-2012, 07:19 PM
Here is a video of a bone stock Delorean running

:
http://www.youtube.com/watch?v=FLVEKgbc0lY&list=FLmXDS0NA2ZGVJ2Wvj8MCb7g&index=45&feature=plpp_video

I haven't seen it myself other than VIN 4980 having the classic "idle hunt" issue. The cam shaft is what makes the lopey noise.

sdg3205
04-03-2012, 07:23 PM
Is loping the same as hunting?

Chris Burns
04-03-2012, 07:28 PM
No. The idle hunt is when the RPM's jump up and down.

thirdmanj
04-03-2012, 07:52 PM
Yeah thats what I mean by loping. RPMs up and down, up and down. Between 800 and 1100 RPMs, up and down. Uuuuup, and down.

I just noticed that post looks funny, but you get the point.

DMCMW Dave
04-03-2012, 09:04 PM
It's not unusual but it can generally be tuned out if all the systems are functioning properly. It shouldn't really do it after being warmed up. It can be symptomatic of a sticky idle motor or other not-quite-right issues.

Im my experience, a slight tweak of the CO adjustment toward "lean" will usually get rid of it.

rddmc
04-03-2012, 09:37 PM
I bought the first "refurbished" car DMC, Texas sold in 2001. It would always lope as you describe until the engine warmed up. I always assumed this was normal for the car since I have heard a lot of others do it also. Once the engine warmed up the lope would stop.

When Dave and Mike at DMC Midwest tuned up my car and added the Stage I engine upgrade the lope ceased to exist. Now when I start the car the engine idles at a constant speed. The loping never bothered me and I always assumed it was normal. I prefer the constant idle that I have now, especially with the sound of the Stage I system. I always wondered if the loping wasted gasoline, but since I didn't usually idle the engine before driving the car it was pretty much a non issue.

Rod
10921

thirdmanj
04-03-2012, 09:45 PM
It's not unusual but it can generally be tuned out if all the systems are functioning properly. It shouldn't really do it after being warmed up. It can be symptomatic of a sticky idle motor or other not-quite-right issues.

Im my experience, a slight tweak of the CO adjustment toward "lean" will usually get rid of it.

Ok, thanks that's good to know. Does it hurt anything? How should I go about troubleshooting it? Figuring out if it's the idle motor or CO adjustment? Or should I just leave well enough alone?

sdg3205
04-03-2012, 09:49 PM
I used to hunt too. It worsened with electrical load (headlights on etc). After some digging I found my FV wasn't operating because the relay plugs backed out. With that fixed and the mixture adjusted my hunt/lope went away.

thirdmanj
04-03-2012, 09:56 PM
I used to hunt too. It worsened with electrical load (headlights on etc). After some digging I found my FV wasn't operating because the relay plugs backed out. With that fixed and the mixture adjusted my hunt/lope went away.

That sometimes happens to me. Other times the electrical load just evens it out. Occasionally it goes away entirely, when it REALLY good and warmed up. Pardon my ignorance but what's FV?

sdg3205
04-03-2012, 09:57 PM
Frequency valve

thirdmanj
04-03-2012, 10:01 PM
Thanks man, I'll take a look at it.

Jonathan
04-03-2012, 11:03 PM
Here's another car running video for comparison.


http://www.youtube.com/watch?v=EPhH_NowHh8&feature=relmfu

The engine wasn't warmed up for this test.

Kevin
04-04-2012, 02:43 PM
When Dave and Mike at DMC Midwest tuned up my car and added the Stage I engine upgrade the lope ceased to exist. Now when I start the car the engine idles at a constant speed.

Same here, ever since getting my Stage II from DMCMW, the idle hunting stopped.

jmettee
04-04-2012, 11:26 PM
Here's a couple videos I've made.

1) VIN 6704 (which became the DCS10 Raffle Car) when I brought it home, before I touched anything. Engine was warm after a 45 minute drive (car accelerated like crap too)

http://www.youtube.com/watch?v=CKwTZUCHsW0&list=UUXvxTIo85KJ4JA-CP4zzWcg&index=17&feature=plcp

2) Here's the same car later that night after I adjusted the mixture (touched nothing else)

http://www.youtube.com/watch?v=E9WQmyB28Gk&list=UUXvxTIo85KJ4JA-CP4zzWcg&index=16&feature=plcp


3) Finally, here's my car right after I put cams in (no muffler). It has a real lope from the cams, but still idles pretty level/smooth.

http://www.youtube.com/watch?v=SRsK4qRRnSk&list=UUXvxTIo85KJ4JA-CP4zzWcg&index=7&feature=plcp