View Full Version : DeLorean Dies - on Jalopnik
Dangermouse
04-12-2012, 02:43 PM
(no, you read the title wrong!)
Proof that there is at least one D fan on Jalopnik
http://jalopnik.com/5898798/the-final-resting-place-of-the-tools-that-birthed-a-time-machine
Farrar
04-12-2012, 03:14 PM
Heh... first thing I thought was "What did it die of? Is this the 'World's Fastest DeLorean - TUNED' video again?" :lol:
So does anyone know roughly how far down the dies are? I've always heard they're at the bottom of the sea, but never how far down. I'm curious if anyone with the money and/or resources ever considered pulling them up for reuse. LFF's alone could potentially offset costs depending on the depth and how you market them. Obviously half a mile down is out of the question, but a hundred feet or two might be worth some consideration for someone that already has access to the right equipment :confused2:
Disclaimer: I have zero aquamarine experience other than watching a bit of TV with this kind of stuff in it, so take it for what it's worth.
Dracula
04-12-2012, 11:12 PM
Another piece that would be interesting and informative if it weren't, overall, negative and laden with bad BTTF puns.
xbrules
04-13-2012, 12:59 AM
Very cool but very sad at the same time...
any chance of raising them from the deep would be pointless sadly... they are already rusting on deck before being thrown over the side, they'd be unrecognizable lumps of iron on the sea bed by now...
you'd have better luck making new ones... but that's only a matter of time now I guess...
Nicholas R
04-13-2012, 01:14 AM
There is no chance that they would be salvageable after what they've been subjected to for all these years. Ever seen photos of a rusted shipwreck or photos of titanic wreckage? That salt water is just destroying them; it speeds up the rusting process exponentially. They are WAY beyond saving.
Nicholas R
04-13-2012, 01:19 AM
There is no chance that they would be salvageable after what they've been subjected to for all these years. Ever seen photos of a rusted shipwreck or photos of titanic wreckage? That salt water is just destroying them. They are WAY beyond saving.
Also this seems a little ridiculous to me:
But of course, no matter how sophisticated and cool the final product may have looked, few car companies seemed eager to get their hands on the technology behind stamping out obscenely heavy stainless steel body panels.
"Obscenely"?? come on
john 05141
04-13-2012, 05:48 AM
Divers did go down to look at the dies. They are not really that far deep down. The dies were buried deep under the mudd, and this obviously protected them against corrosion, or so they say. Pictures were taken and these were or are still on use at an artist's exhibition where you can see that these dies (or what comes above the mudd) are used as housings for all sorts of seafloor creatures. (Pictures on the wall show the dies) There were ideas to raise mold only from the left front fender and restore it. The owner of the dies (the fishing company) found out what the idea was and raised the price to such a level it would no longer make sense.
This is what I have read somewhere and from a presentation at Eurofest last year where these dies were discussed. I can not tell if the above is true or not. How the mold was to be restored was also discussed in an article I read on the internet a year ago. The restoration would not be suitable for large serial production but perfectly good to manufacture at least 500 or so fenders.
I think this will never happen.
John
Thanks for reminding me John, I forgot to post these!
I went to that particular exhibition in Belfast in February and took these photos. The panels are all one-offs made by hand by a guy whose name escapes me at the minute.
More here:
http://www.seanlynchinfo.com/DeLoreanProgressReport.htm
http://www.seanlynchinfo.com/DeLoreanProgressReportII.htm
http://i.imgur.com/TzDnI.jpg
http://i.imgur.com/erkHf.jpg
http://i.imgur.com/wUsCY.jpg
http://i.imgur.com/rCCuP.jpg
http://i.imgur.com/Y2jfH.jpg
http://i.imgur.com/Lg2tn.jpg
Didn't realize the molds were made of iron or steel. Guess I never really thought about it. I'm not sure they'd be as degraded as the Titanic considering it was about 20-25 years before the wreckage was discovered, and it's been 100 years after it sunk, but rust has undoubtedly taken it's toll on the dies. Shame the fishing company isn't up for a trade of scrap metal for the molds. (Or has no one asked?) I've often thought about taking the LFF off of my DeLorean when I get one (won't be long now) and have some spare time, making some sort of stiff mold, and reverse engineering the dies from that. Might be able to make a pretty penny or two :tongue:
Nice pictures MML!
SoCalDMC12
04-16-2012, 11:40 PM
(no, you read the title wrong!)
Proof that there is at least one D fan on Jalopnik
http://jalopnik.com/5898798/the-final-resting-place-of-the-tools-that-birthed-a-time-machine
Nice article. Interesting to see such an esoteric piece of Delorean history being exposed to the public-at-large (or, at least, car-nuts-at-large).
sadeeky
04-16-2012, 11:56 PM
The real question here is can someone make more Dies? I mean DMC is supposed to be back in Houston, Did they ever thought about making more dies?
Nicholas R
04-17-2012, 12:03 AM
The real question here is can someone make more Dies? I mean DMC is supposed to be back in Houston, Did they ever thought about making more dies?
The cost of making a die like that is pretty extreme, plus the cost of stamping out panels. There would have to be a lot of people needing fenders in order to justify the cost. Remember as soon as a part becomes available, it's value goes down.
Dracula
04-17-2012, 01:04 AM
The cost of making a die like that is pretty extreme, plus the cost of stamping out panels. There would have to be a lot of people needing fenders in order to justify the cost. Remember as soon as a part becomes available, it's value goes down.
They did make new underbodies, after all.
sadeeky
04-17-2012, 02:03 AM
So basicly if I wreck my D thats it? How much more stock panels do DMCH have?
john 05141
04-17-2012, 09:37 AM
A mold for SS fenders and a mold for fibreglass is something totally different. You can make a mold for fibreglass at home. DMC made so many molds for the underbody, there are actually differences in length from an inch from one Delorean to another. Those molds wear, and need to be replaced from time to time.
The dies for the doors or fenders are made from steel, chequed for perfection and then hardened. Even then they have a limited lifetime, but costs hundres of thousands of dollars. So it wil not be worth making a new mold for the fender.
But many people started "collecting" those LFF just in case. Today some people start to sell them, and discovered the value went over its peak
That is a bit my worry about those electric Deloreans. If it would become a succes... the pile of fenders will go down quickly.
John
Nicholas R
04-17-2012, 02:36 PM
They did make new underbodies, after all.
They already had the molds for those, they didn't have to have them made. Plus there is a demand for those since they're planning on using them in the EV's. Also those are molds not dies. A die stamps sheet metal into a shape where a mold is injected or layed up. Dies are quite a bit more expensive and precise.
Dracula
04-17-2012, 03:13 PM
They already had the molds for those, they didn't have to have them made. Plus there is a demand for those since they're planning on using them in the EV's. Also those are molds not dies. A die stamps sheet metal into a shape where a mold is injected or layed up. Dies are quite a bit more expensive and precise.
I'll give them that they had the molds, but there's more of a demand for the LFF than there is for the EV project because you need a LFF for not just the stupid EVs that will, more than likely, never see more than 5 built, but also every other DeLorean.
The cost of making a die like that is pretty extreme, plus the cost of stamping out panels. There would have to be a lot of people needing fenders in order to justify the cost. Remember as soon as a part becomes available, it's value goes down.It's all how you market them. If you just say you have a "stockpile" of LFF's, who's going to think "made from new dies"? Perception will be that you happened upon someone who had a stash of them in some barn or something and are deciding to sell. I've seen some go for thousands, and considering how many DMC owners would kill to have another LFF, demand is fairly large (key word: demand -- most who want one can't afford it). It doesn't take many to recover the costs, but I'll bet you can get at least 50-100 LFF's from one die.
Now of course, this kind of marketing has questionable ethics, but my point is that it's a viable business plan if done right.
DMCMW Dave
04-17-2012, 11:36 PM
...but also every other DeLorean.
Not quite - every other DeLorean already has a left front fender. It's not like it's a wear-out part that you need to replace every 50,000 miles, and they certainly don't rust away like fenders on old Chevys.
Just a question of perception - how may left front fenders do y'all suppose get damaged beyond repair every year, worldwide? I'd like to hear some guesses to see what people are thinking in these discussions.
I'd be willing to bet (not knowing a good way to prove it her than observation of economic behavior) that the ongoing scrappage rate of cars is higher than the crash rate for left front fenders. As long as it stays that way there will be absolutely no reason for anyone to invest tens of thousands of dollars (or more) in stamping out new ones. Especially since, as Nick mentioned, as soon as someone were to do this all the "hoarded" ones would come out at 1/2 price.
Nicholas R
04-18-2012, 12:20 AM
Not quite - every other DeLorean already has a left front fender. It's not like it's a wear-out part that you need to replace every 50,000 miles, and they certainly don't rust away like fenders on old Chevys.
Just a question of perception - how may left front fenders do y'all suppose get damaged beyond repair every year, worldwide? I'd like to hear some guesses to see what people are thinking in these discussions.
I'd be willing to bet (not knowing a good way to prove it her than observation of economic behavior) that the ongoing scrappage rate of cars is higher than the crash rate for left front fenders. As long as it stays that way there will be absolutely no reason for anyone to invest tens of thousands of dollars (or more) in stamping out new ones. Especially since, as Nick mentioned, as soon as someone were to do this all the "hoarded" ones would come out at 1/2 price.
An engineer I worked with on Co-Op had previously worked for Dodge, working with frames and body panels. I had lots of conversations about DeLoreans with him and the topic of SS body panels was regularly a topic of discussion. I asked him all about the dies they used to stamp carbon steel panels, as well as the cost of a new die for DeLorean fenders. He made it pretty clear that the tooling alone to work SS would be well into the hundreds of thousands range to be made properly. That wasn't even including the cost of a press to actually stamp out the panels. I honestly think people would have to be knocking down the doors at DMCH for them to consider having such tooling made. There just isn't enough demand.
I agree with Dave. I certainly hear a LOT more about cars being parted out than cars being wrecked. It's not like they're not out there. They're just expensive. Anyone on this forum could have a spare right now: http://www.ebay.com/itm/DELOREAN-FENDER-LEFT-STAINLESS-STEEL-DRIVER-SIDE-OEM-/110763167440?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item19c9ffced0#ht_500wt_1321 $2500 is certainly a lot of money but it's not outrageous if you have to have one.
Right now, there isn't anyone that needs a left front fender that badly. If new ones were available, the value would probably drop by at LEAST 50% because then, the only people buying would those that NEED them, not those who hoard them "just in case". No need to hoard a part that is available should your need arise. Say the price was a very low, $100,000 for a die (not even considering machine and stamping costs). Right now, a right front fender is only $500 from DMCH (because they have a surplus). Even if despite now having a stockpile of them, DMCH can somehow charge $1000 for their new left front fenders, they'd still have to be pretty damn sure they're going to sell at least 100 relatively soon, (say 20 per year for the next 5 years) just to justify the cost of tooling (heck when I worked with GE, if something wasn't going to pay for itself in 1 year, it was hardly given a second thought). I know I've been on this forum for several years and it's pretty rare someone comes on looking for a left front fender. Certainly not 20 per year.
Bottom line, in my opinion, there is just not enough demand. Somehow DMCH is getting by without needing them for their projects, and there just aren't enough people looking for them that cant find them. Personally, I think we'll start to see hand made one off's long before a mass production of them.
Dracula
04-18-2012, 03:23 AM
Not quite - every other DeLorean already has a left front fender. It's not like it's a wear-out part that you need to replace every 50,000 miles, and they certainly don't rust away like fenders on old Chevys.
Just a question of perception - how may left front fenders do y'all suppose get damaged beyond repair every year, worldwide? I'd like to hear some guesses to see what people are thinking in these discussions.
I'd be willing to bet (not knowing a good way to prove it her than observation of economic behavior) that the ongoing scrappage rate of cars is higher than the crash rate for left front fenders. As long as it stays that way there will be absolutely no reason for anyone to invest tens of thousands of dollars (or more) in stamping out new ones. Especially since, as Nick mentioned, as soon as someone were to do this all the "hoarded" ones would come out at 1/2 price.
I know of one car that has seen at least 3 different LFFs in its lifetime and a few other cars that have either had them replaced or need to. I try not to speculate on something with no prominence or data whatsoever as it feels too much like a shot in the dark when I do. There's also the fact that numerous painted cars had LFF or other panel issues that, if corrected, could result in the cars being reverted to stainless.
I completely see your point and I'd also like to note that it works the exact same way with underbodies.
I'd be willing to bet (not knowing a good way to prove it her than observation of economic behavior) that the ongoing scrappage rate of cars is higher than the crash rate for left front fenders.Hmm, guess I never considered the parts D's. Point taken, especially since most accidents don't involve the LFF (statistically, at least: it's just one of four corners obviously). I redact that last post then, doesn't make much sense when there's already a growing supply.
DMCVegas
04-19-2012, 02:48 AM
There was a body shop on East Lake Mead Blvd. in North Las Vegas that supposedly had stacks of damaged DeLorean body panels. I wonder what ever became of that place...
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.