opethmike
04-30-2012, 11:12 PM
Car is a 1986 VW Cabrio, belonging to my friend Patrick. We recently changed the cam belt, the cam shaft, and removed the head to be serviced, as well as have new valve springs installed.
Car has Bosch KE-Jetronic.
We re-assembled the car, and we have confirmed several times that the crank/cam timing is correct, ignition timing is correct, and air to fuel mixture is correct, all as per factory VW specs.
Car will start and idle fine, albeit a bit lumpy thanks to the new, big cam. Idle is ~750 RPM. Car will rev freely. Here is where things get funny.
Sometimes, after revving, the RPMs will drop back to the proper idle speed. Sometimes, they will get stuck between 1.5 and 2k.
We can drive back and forth on his drive way in 1st gear and reverse gear seemingly without issue. But every time we try to drive the car up on ramps, it dies once the clutch is fully let out while climbing the ramps. Its as if the car can't deal with being under load.
We have tried to no avail to find vacuum leaks, which is what I would think it to be, and will continue to do so, but would like people's input on if it could be anything else that could be wrong.
Thanks in advance!
Car has Bosch KE-Jetronic.
We re-assembled the car, and we have confirmed several times that the crank/cam timing is correct, ignition timing is correct, and air to fuel mixture is correct, all as per factory VW specs.
Car will start and idle fine, albeit a bit lumpy thanks to the new, big cam. Idle is ~750 RPM. Car will rev freely. Here is where things get funny.
Sometimes, after revving, the RPMs will drop back to the proper idle speed. Sometimes, they will get stuck between 1.5 and 2k.
We can drive back and forth on his drive way in 1st gear and reverse gear seemingly without issue. But every time we try to drive the car up on ramps, it dies once the clutch is fully let out while climbing the ramps. Its as if the car can't deal with being under load.
We have tried to no avail to find vacuum leaks, which is what I would think it to be, and will continue to do so, but would like people's input on if it could be anything else that could be wrong.
Thanks in advance!