Log in

View Full Version : Reskinned Dashboard for vin 774



Nick774
05-02-2012, 01:21 PM
1002810029100301003210031

Hello everybody I know some of you are wondering how 774's progress is coming. Me and my old lady have been working on the car as much as we can with our very few days off however progress is steady, slow, but steady. Until this horrible weather resides we have been taking care of tedious little things such as straightening the fascias, minor fiberglass patching, We've refabricated all four original headlight housings and coated them with a thin layer of fiberglass to seal them from ever being coroded again and they look great! Our Dashboard was a bit of a concern but we managed to re-skin it with a very nice vinyl that matches the leather on the doors perfectly somehow, Actually got the tip to go to joanns fabric from DMage after seeing his steering wheel pics.

The dashboard had a nice big crack in the left corner above the glove box as most dashboards Ive seen do, so by sanding down the "ramped" edges and filling with a resin and then more sanding it was nice and flush and level with the rest of the dash. A little vinyl, glue and a patient girlfriend and we now have a dashboard that really looks great and the grain is very nice. We plan to do the a pillars, steering wheel center piece and the instrument cluster that is if the original doesnt clash with the new dash so we shall see. Hope you all enjoy I will be posting much more pictures very soon!

( These pictures really dont do it any justice but I will post better pics soon.) enjoy :) - Nick774

mluder
05-02-2012, 01:29 PM
Looks very nice.

How do you plan to deal with the speaker openings?

Cheers,
Steve

Farrar
05-02-2012, 01:43 PM
Nice going, Nick! I really like that material -- when I saw some of that vinyl on sale for half price at JoAnn, I bought a few yards of it -- hoping to re-do the dashboard and console in my car using that.

Quick question: Did you remove the cloth back from the vinyl before adhering it? If so, how did you manage to remove the back without damaging the vinyl? Thanks!

Nick774
05-02-2012, 03:23 PM
I actually left the cloth on the vinyl, It had a good feel to it otherwise I was afraid that the vinyl by itself would be rather thin and prone to anything catching and tearing it. It turned out great and bonded very well to the dash and was a snap to form around tight corners. As for the speakers I have a nice pointed tool where I have begun to gently pierce through the back, then from the top down I have another tool that will perfectly form the speaker holes with clean edges and will look stock. The vinyl was tagged as Alpine black and with 40% off coupon only $24 for two yards (actually a little more) at joanns.

Farrar
05-02-2012, 03:37 PM
I actually left the cloth on the vinyl, It had a good feel to it otherwise I was afraid that the vinyl by itself would be rather thin and prone to anything catching and tearing it. It turned out great and bonded very well to the dash and was a snap to form around tight corners.

Thanks, Nick! It does look beautiful.

mluder
05-02-2012, 03:41 PM
i actually left the cloth on the vinyl, it had a good feel to it otherwise i was afraid that the vinyl by itself would be rather thin and prone to anything catching and tearing it. It turned out great and bonded very well to the dash and was a snap to form around tight corners. As for the speakers i have a nice pointed tool where i have begun to gently pierce through the back, then from the top down i have another tool that will perfectly form the speaker holes with clean edges and will look stock. The vinyl was tagged as alpine black and with 40% off coupon only $24 for two yards (actually a little more) at joanns.

nice..

DMC3165
05-02-2012, 07:29 PM
Way to go Nick! It looks great. Can't wait to see more of your progress on the old girl!

Squall67584
05-02-2012, 09:43 PM
Looks great! I wonder if the speakers would still sound okay through the vinyl.

Kenny_Z
05-05-2012, 01:18 PM
I just ran across this: http://www.joann.com/vinyl-arctic-grey/prd19510/

For those of us with grey interiors. I'm going to take a piece of an old seat by my local Joann's to see how close that is to the stock Grey.

Kenny_Z
05-06-2012, 07:43 PM
I went to JoAnn's today and bought a couple of yards of fabric. Here it is inside the D in the sunlight. It's really close. Other than the grain I think a non-owner would have a hard time telling this wasn't stock.

http://uploads.m-cgi.com/kennyz/Delorean/Projects/int01.jpg
http://uploads.m-cgi.com/kennyz/Delorean/Projects/int02.jpg

DMCVegas
05-07-2012, 02:13 PM
I went to JoAnn's today and bought a couple of yards of fabric. Here it is inside the D in the sunlight. It's really close. Other than the grain I think a non-owner would have a hard time telling this wasn't stock.

http://uploads.m-cgi.com/kennyz/Delorean/Projects/int01.jpg
http://uploads.m-cgi.com/kennyz/Delorean/Projects/int02.jpg

VERY nice! I'm no expert, but I wonder how you could go about creating a wrinkle-finish on that fabric to match the seats for the A & B Pillars?

Dangermouse
05-07-2012, 04:26 PM
VERY nice! I'm no expert, but I wonder how you could go about creating a wrinkle-finish on that fabric to match the seats for the A & B Pillars?

http://brain.pan.e-merchant.com/6/0/03915006/l_03915006.jpg

dmcjohn
05-07-2012, 05:59 PM
Good idea Dermot!

I think Shane over in Ireland looked into this a lot in the past / how to recreate the crinkle effect, but the original machine is long gone.

It would be fun to come up with a redneck way of doing it - maybe lie some vinyl or leather crinkled between 2 sheets of plastic and drive over it with a steam roller?

DMCVegas
05-07-2012, 06:51 PM
Awesome idea! Thank you! Saw the episode of Wheeler Dealers last week with the XJS and the recovered center console (or centre depending upon where you live :biggrin:) with the walnut veneer, and really got some creative ideas from that! Now with this in mind too, there are quite a few more ideas bouncing around in my head.

Farrar
05-07-2012, 07:13 PM
I think if you get the vinyl warm enough you might be able to create a texture. You'd have to insulate it from the iron, though, or it would stick... wax paper or parchment paper, maybe?

stevedmc
05-07-2012, 07:27 PM
Personaly, I think it is silly to worry about the wrinkled look. Do I like it better, yes, but this is because I have a trained eye for Deloreans.

The average Joe thinks a Delorean has wrinkles on the seat, console, kneepads, because it is old. Ultimately you just have to do whatever makes you happy. But if you are worried about making your car look perfect for car shows, it sort of works in your favor to not have wrinkles (unless being judged at DCS of course).

Kenny_Z
05-08-2012, 02:04 AM
I don't see myself using any wrinkled pieces in what I am planning but I could give that iron idea a shot on some scraps I'll definitely have. It'd take a large piece of metal you could heat up to melt the pattern into the material. Too small and it would be very difficult to keep the pattern uniform.

DMCVegas
05-08-2012, 03:02 AM
Personaly, I think it is silly to worry about the wrinkled look. Do I like it better, yes, but this is because I have a trained eye for Deloreans.

The average Joe thinks a Delorean has wrinkles on the seat, console, kneepads, because it is old. Ultimately you just have to do whatever makes you happy. But if you are worried about making your car look perfect for car shows, it sort of works in your favor to not have wrinkles (unless being judged at DCS of course).

If I was concerned about what other people think, I wouldn't even own a DeLorean in the first place let alone customize one. What I choose to do is of no concern to you.

Stainless
07-13-2012, 01:06 PM
Hey Nick,

What glue did you use to adhere the vinyl to the old dash? Any updated pics on how it looks in your car and matches up with the rest of the interior?

SamHill
07-13-2012, 02:50 PM
If I was concerned about what other people think, I wouldn't even own a DeLorean in the first place let alone customize one. What I choose to do is of no concern to you.

But of course it is!

Good day to you, sir.

Nick774
07-15-2012, 06:01 PM
Hey Stainless, We used 3M 80 Rubber and Vinyl adhesive ($14 @ Home Depot) and some clamps around a few of the edges and it turned out great. I havent installed it yet as i still have a ways to go until I begin assembling the interior. I will be skinning the pillars and center steering wheel with this as it really looks wonderful! Be sure to allow it an over night cure w/ the clamps on. 11974

kajcienski
07-15-2012, 07:00 PM
How do you find the fabric as far as durability? I have experimented with a fair share of vinyl in the past and found the "fabrics" verses "apholstery material" to be a bit of a problem with wear.

Farrar
07-16-2012, 10:56 AM
Hey Stainless, We used 3M 80 Rubber and Vinyl adhesive ($14 @ Home Depot) and some clamps around a few of the edges and it turned out great. I havent installed it yet as i still have a ways to go until I begin assembling the interior.

I can't wait to see the result. Thanks for keeping us posted!

Stainless
07-16-2012, 01:16 PM
Hey Stainless, We used 3M 80 Rubber and Vinyl adhesive ($14 @ Home Depot) and some clamps around a few of the edges and it turned out great. I havent installed it yet as i still have a ways to go until I begin assembling the interior. I will be skinning the pillars and center steering wheel with this as it really looks wonderful! Be sure to allow it an over night cure w/ the clamps on. 11974

Have you also recovered the glove box lid to match? I went to Joann's on Friday to check out the vinyl and found the exact stuff that you used. I think it's a great option, but my A pillars are in perfect condition and don't want to have to recover everything to get it all to match. I wonder how much of an eye sore it would be to me if I just did the dash and glove box lid. I'm really looking forward to seeing the finished product!

Nick774
07-17-2012, 12:56 PM
I did not reskin the glove box lid since its in decent shape however I may reconsider when I have the interior reassembeled and I know how it compares. While we are on this subject I have been meaning to ask if you or anyone here has a glove box lid that has a bit of a curl to it on the top edge? Its not terrible but its not flat either...

DrJeff
07-17-2012, 02:34 PM
Nick774,

I'd be interested to know how the refitting goes with your reskinned dash. I'm planning the same process for my own, but I've read in other posts that the additional thinkness of the vinyl/material makes for a tight fit getting the dashboard back into place. I'm thinking it might be worthwhile to take a skim off the dash (now underbody) at the places it is likely to be tightest.

DMCVegas
07-18-2012, 11:03 AM
I did not reskin the glove box lid since its in decent shape however I may reconsider when I have the interior reassembeled and I know how it compares. While we are on this subject I have been meaning to ask if you or anyone here has a glove box lid that has a bit of a curl to it on the top edge? Its not terrible but its not flat either...

Yup. It got worse the more it was exposed to sunlight. The edge of the lid is flush with the dash, and the rest of the lid has sunk in.