Log in

View Full Version : Does anybody else suck at cars?



Totally 80s
05-08-2012, 02:50 PM
I've been working on cars for about 10 years now (just my own, not professionally) and I still feel like I suck at cars. Seems like every time I fix something I break something else. Or it takes me 5 hours what should take 1.

For example, yesterday I was putting a new brake switch on the master cylinder of my 63 bug and after I replaced the switch I went to reattach the hard brake line and the damn wrench slipped and rounded off the nut. So now I have to replace the hard line. I know in hindsight I should have used a "line wrench" but I didn't want to run to the store for it. But really the regular wrench should have worked just fine.

I don't know how much of it has to do with all the cars I have are 30-50 years old or if it's just me. :hmm:

82DMC12
05-08-2012, 03:19 PM
I've been working on cars for about 10 years now (just my own, not professionally) and I still feel like I suck at cars. Seems like every time I fix something I break something else. Or it takes me 5 hours what should take 1.

For example, yesterday I was putting a new brake switch on the master cylinder of my 63 bug and after I replaced the switch I went to reattach the hard brake line and the damn wrench slipped and rounded off the nut. So now I have to replace the hard line. I know in hindsight I should have used a "line wrench" but I didn't want to run to the store for it. But really the regular wrench should have worked just fine.

I don't know how much of it has to do with all the cars I have are 30-50 years old or if it's just me. :hmm:

Lol. I've been wrenching about 12 years and a lot of it comes down to having the right tool for the job and recognizing when to use it. For instance, after high school I wanted to be a mechanic. I signed up at a trade school and bought a full mechanics tool set with chest for about $1500 with half off student pricing. A couple weeks later I dropped out before I started once I realized job prospects and earnings potentials were low. Ended up getting a BS in Finance instead.

But anyway, I wound up with a great tool set with every single socket and wrench you could imagine.

Even with the best tools, sometimes s@$% happens and stuff breaks! But a simple job quickly goes awry if you have poor tools and not the right ones.

Also recognizing ways to use tools other than their primary purpose. Easy example - putting the box end of a wrench on a tight bolt, then putting the box end of a slightly larger wrench over the open end of first wrench in order to double the leverage. I do this all the time.

I always use line wrenches on compression fittings like brake and clutch pipes. The brass is very soft and really easy to round off. Never use an open wrench on them!

Andy

Jack
05-08-2012, 04:17 PM
I felt the same way when I snapped a exhaust stud off.
Then again when the easy out broke..
Then after much drilling and cussing, I just switched to the other two diagonal holes for that port instead.

Could be worse, could be working on one of them modern cars. You know the ones that need a special tool to even get to a spark plug.

Sidaries
05-08-2012, 06:02 PM
I've been working on cars for about 10 years now (just my own, not professionally) and I still feel like I suck at cars. Seems like every time I fix something I break something else. Or it takes me 5 hours what should take 1.

I don't know how much of it has to do with all the cars I have are 30-50 years old or if it's just me. :hmm:

Same here. I realized that for me it is cheaper to take the car to a mechanic than fixing it myself. :)

awildermode
05-08-2012, 07:50 PM
Words from the late-great Mitch Hedberg pretty much sums up my car knowledge:


I don't know how to fix a car. If the car breaks down, and the gas tank does not say "E", I'm screwed. But if the gas tank says "E", I get all cocky - "I've got this one, don't worry." So I get out the toolbox AKA wallet.

Kukem
05-08-2012, 09:39 PM
I know very little about cars. Ever since I decided to pursue this crazy dream of someday owning a DeLorean, I took it upon myself to try and learn at least a bit about automechanics. I bought a few Automotive mechanics textbooks from Amazon and have been reading them. I figure I don't need the newest ones as the DeLorean is a 30 year old car, so the books are fairly cheap and easy to read as they are for schools. I'll never be as knowledgable as some of the guys on here, but I don't want to be completely in the dark if I ever have to fix something myself.

adam_knox
05-08-2012, 10:46 PM
:werd: Man, don't even get me started... I used to enjoy working on cars, but lately I've been so busy that I'm doing a repair job after an 11 hour day rushing to get it done so I can just go to bed and have a working car in the morning. I fantasize about having a lift. I hate spending money sending it to a shop, but sometimes I just don't have the time to fix stuff anymore because I always hit a hiccup in what should be an "easy" repair. It's nice having someone do it. It's a weird feeling though, I feel sometimes like I'm failing as an owner when I don't fix stuff myself. But then the fact that I don't have to pop some Advil at the end of the night makes up for the fact! :sleeping: Sigh, I would just love a lift...

Delorean Industries
05-08-2012, 11:17 PM
I've been working on cars for about 10 years now (just my own, not professionally) and I still feel like I suck at cars. Seems like every time I fix something I break something else. Or it takes me 5 hours what should take 1.

For example, yesterday I was putting a new brake switch on the master cylinder of my 63 bug and after I replaced the switch I went to reattach the hard brake line and the damn wrench slipped and rounded off the nut. So now I have to replace the hard line. I know in hindsight I should have used a "line wrench" but I didn't want to run to the store for it. But really the regular wrench should have worked just fine.

I don't know how much of it has to do with all the cars I have are 30-50 years old or if it's just me. :hmm:

You are in Hawaii right?

SIMid
05-08-2012, 11:25 PM
I've been working on cars for about 10 years now (just my own, not professionally) and I still feel like I suck at cars. Seems like every time I fix something I break something else. Or it takes me 5 hours what should take 1.


+1

I use to try and do most repairs/servicing, but end up causing more headaches most of the time. Like even a simple spark plug change had me accidentally rethreading the hole due to incorrectly putting the plug in at the wrong angle. The only thing I did achieve to my amazement was rebuilding a distributor forgetting to leave marks. I have now found an awesome mechanic who doesn't charge the earth and is also happy to learn about the Delorean.

But I feel your pain mate! :(

pezzonovante88
05-09-2012, 12:48 AM
I'm pretty close to useless with servicing cars. I'm really good at washing/detailing, but when it comes to anything technical, I have to get someone to do it. As a DeLorean owner, this is not ideal.

Loach43
05-09-2012, 02:42 AM
My downfall is lack of organization. I've probably wasted an entire year of my life searching for lost tools. I have them scattered everywhere and can never find the right one at the moment I need it.

Totally 80s
05-09-2012, 02:44 AM
You are in Hawaii right?

Yeah, I am in Hawaii.

I feel better knowing I am not the only one who sucks at cars. Don't get me wrong I have been able to fix (replace the part) most of the things on my cars myself but about every third "repair" I seem to cause some other trouble. I also feel like a pussy if I have to call a mechanic for help. I know its not rational or logical but there is a little voice in my head saying "a real man could fix that". lol I'm always glad afterwords when I call in a mechanic for a job that is bigger than my skill set but damn its a painful phone call.

It's also tough when you are by yourself fixing your car with nobody around to help or give advice. I would imagine that is one nice thing about working in a real mechanic shop is that you have other to bounce ideas off of or lend a hand.

Totally 80s
05-09-2012, 02:45 AM
My downfall is lack of organization. I've probably wasted an entire year of my life searching for lost tools. I have them scattered everywhere and can never find the right one at the moment I need it.

Why is the 11mm fk'in wrench/socket always missing?

Loach43
05-09-2012, 02:55 AM
today it was the 10mm socket (not kidding)
10 minutes to find that plus another 10 minutes searching for the PB blaster which was hiding behind the trash barrel.

Removing rusty bolts from closing plate..........10 minutes
Searching for crap......................................20 minutes

Mike C.
05-09-2012, 08:42 AM
I will be perfectly honest, and not trying to sound cocky, but I honestly think the number 1 problem most people have with auto work would be solved with the following:

1. Rolling tool boxes
2. A proper lift
3. The proper hand AND air tools.
4. Magnetic trays

Yes, there are some exceptions to the rule, like when things are fused and refuse to budge... but I find the simplest jobs take the longest time due to improper access, having to repeatedly fumble around for a tool that works, and losing small parts or dropping nuts and bolts. When Ozzie and i put the new fans in my car, it took quite a long time to get the old ones out, mainly for all 4 parts on that list. A lift would have been PERFECT. that would have given me access for my air tools. These little jobs are a pain in the ass. Honestly, I do not intend to buy another project car until I have a properly set up garage. I'm investing in that first. I have kinks in my neck and back that just don't seem to want to be aggravated again.

As far as my mechanical ability, in a proper shop, I love working on cars. Having to keep a D running ALL the time is definitely easier with a second pair of eyes and hands. When I needed advice or a place to tackle a job, I never hesitated to call people.

I will say having a friend like Ozzie made a huge difference with the slave cylinder. I have never installed one from underneath the car before, and he had just accomplished that on his. He was able to finagle that thing in place with a lil brute force literally completely by feel.

Dangermouse
05-09-2012, 09:04 AM
My downfall is lack of organization. I've probably wasted an entire year of my life searching for lost tools. I have them scattered everywhere and can never find the right one at the moment I need it.

+1 on this in terms of working on a car (or actually anything around the house).

I think this is why professionals make it look easier. Firstly they are constantly working on brake calipers, say, so they don't have to remember the order things have to come off. Secondly, they always have the right tool close to hand.

My main tool stash is in the basement, there are some more in the garage and then a whole other set in the trunk of the D (as tech session attendees will attest - it looks like I just poured a toolchest in there - really badly organised). So I have at least 4 hammers, 6 tape measures and 6 stanley knives/box cutters. And yet, I still can't find the 10mm socket when I need it.

They should do one of those HGTV Organizational shows just for guys tool collections :)

ccurzio
05-09-2012, 09:29 AM
My tools are organized while being stored, it's while they're in use that I tend to lose organization. Between not finding a tool that I was just holding, or not finding the last place I set down a removed part from the car, that's where things usually fall apart for me.


I know very little about cars. Ever since I decided to pursue this crazy dream of someday owning a DeLorean, I took it upon myself to try and learn at least a bit about automechanics. I bought a few Automotive mechanics textbooks from Amazon and have been reading them. I figure I don't need the newest ones as the DeLorean is a 30 year old car, so the books are fairly cheap and easy to read as they are for schools. I'll never be as knowledgable as some of the guys on here, but I don't want to be completely in the dark if I ever have to fix something myself.

You'll find that working on the car will go a long way toward learning things. Far more than any book prep.


I know in hindsight I should have used a "line wrench" but I didn't want to run to the store for it.

Sounds like a good many of your "I suck at cars" problems are the result of poor/lazy decisions rather than not understanding the work.

dvonk
05-09-2012, 11:42 AM
I know very little about cars. Ever since I decided to pursue this crazy dream of someday owning a DeLorean, I took it upon myself to try and learn at least a bit about automechanics. I bought a few Automotive mechanics textbooks from Amazon and have been reading them. I figure I don't need the newest ones as the DeLorean is a 30 year old car, so the books are fairly cheap and easy to read as they are for schools. I'll never be as knowledgable as some of the guys on here, but I don't want to be completely in the dark if I ever have to fix something myself.

You'll find that working on the car will go a long way toward learning things. Far more than any book prep.

+1. reading about it helps, but there is nothing like getting your hands dirty and finding out what is going on in there.

i am completely self-taught; when i got my first project car in 2004--i had never even changed the oil on a vehicle before. i bought a $200 irreparable 1952 Pontiac rust bucket on ebay (proof i had no idea what i was doing, :lol: ). however, that car gave me so much more than $200 worth of valuable automotive experience, and more importantly... confidence. with that confidence i was able to start doing small repair jobs on my DD, and when the repairs i was doing actually worked, it gave me even more confidence to do larger things. eventually i got a running/driving project car (the blue 1958 Buick in my avatar), and sold the Pontiac for $180 scrap after selling $150 worth of parts to a local guy restoring a '49 Pontiac.

my advice would be to buy a cheap junker and start ripping it apart and putting it back together! :biggrin:

Kukem
05-09-2012, 12:11 PM
+1. reading about it helps, but there is nothing like getting your hands dirty and finding out what is going on in there.

i am completely self-taught; when i got my first project car in 2004--i had never even changed the oil on a vehicle before. i bought a $200 irreparable 1952 Pontiac rust bucket on ebay (proof i had no idea what i was doing, :lol: ). however, that car gave me so much more than $200 worth of valuable automotive experience, and more importantly... confidence. with that confidence i was able to start doing small repair jobs on my DD, and when the repairs i was doing actually worked, it gave me even more confidence to do larger things. eventually i got a running/driving project car (the blue 1958 Buick in my avatar), and sold the Pontiac for $180 scrap after selling $150 worth of parts to a local guy restoring a '49 Pontiac.

my advice would be to buy a cheap junker and start ripping it apart and putting it back together! :biggrin:

You know, that isn't a bad idea. To be honest, I have managed to fix a few small issues with my daily driver (Toyota Matrix) since I started. Mind you they were small repairs but it was still something I normally would never have even attempted before all of this. I don't really hang out with any people who are mechanically inclined, so I never had the oppertunity to do/try any of this stuff. As silly as it sounds, small repairs have been enough encouragement for me to keep trying!

DMCVegas
05-09-2012, 12:15 PM
To add another 2ยข into this conversation...

I absolutely sucked when I started car repair. No one when they start out is going to be ready for a NASCAR pit crew. But I learned a few lessons from my mother who got me started (yes, you read that right) and the most important of those was confidence. From there I just had to go through the school of hard knocks and learn a few things. The truth is that I actually learned car repair on my DeLorean. So if I can fix a DeLorean, I know that I can probably fix damn near anything. Which again is a great confidence booster! But you do need to give it some time, and find a mentor. If not someone in person, here online.

Calling a mechanic doesn't make you a pussy. But not realizing your own abilities can indeed make you a fool. Charge the A/C? Sure, I can do that. Rebuild brake hydraulics? I'll do that myself too. Swap a clutch? I'll farm that work out to a garage. Could I do it myself? Sure if given the proper time and space. But sometimes there are just some things that I don't want to do. Outsourcing the work to a garage is not a problem and certainly nothing to be ashamed of. The key of course is to know your own abilities, as well as to sometimes do the math and figure on what is cheaper: your time or a mechanics?

Tools are also a VERY important thing, as well as techniques. For basic repairs, this will cover about 90% of the work you'll be doing out in the garage:
http://www.blackfridaymart.com/images/thumb_1321964648_382d304e906076e8c30ec26f9dad8d49. jpg

Now you can buy whatever brand of tools you like. I use this one as an example because it's what I use personally as my core tool kit. But whatever brand you buy, you need to make sure it's a quality name-brand. Stay away from the cheap socket sets at AutoZone. More often than no I've had old bolts on my car remain unfazed while they simply rounded out and shreded cheap sockets that went up against them. Whenever you spend your money, spend it wisely!

From there you just need pick up a few specialty tools here and there, and learn a few techniques. Like attaching sparkplugs to a vacuum hose to screw them in in order to prevent cross-threading. Little things like that go a long way. Same things with tools. There are jobs out there that you'll pull your hair out and bust your knuckles (if not parts) because of. But if you know what tools to use and how to use them, you'll get them knocked out in seconds or even minutes and wonder what the fuss was all over? Tools and knowledge of techniques make all the difference in ease of work as well as time it takes. And luckily you're on a DeLorean board here, which has a better ratio of help to B.S. than lots of other car message boards out there.

Organization isn't simply a habit you have to get into. It's something else that requires tools. And these are the ones you need:

http://ak.buy.com/PI/0/500/216025972.jpg http://www.dennymagic.com/wp-content/uploads/wpsc/product_images/PEN-FULL.jpg http://www.camera-news.com/images/pictures/kodak-2390597-102-megapixel-easyshare-m340-digital-camera-blue.jpg

And sometimes one of these comes in handy as well:

http://www.gp30.com/planobox/plano01.jpg

What you want to do is keep all of the screws and parts that you remove in order. Ziploc gallon-sized freezer bags are perfect for this. You can write on the bags with the sharpie to describe what's inside, as well as write the order in which everything was pulled off, so that you know in what order it has to go back on.

Tackle boxes are great for organizing screws and bolts. If it's an adjustable box, just epoxy the walls into place (create a variety of boxes for different compartment sizes). Label each box with a letter, and number each internal compartment. That way if you're disassembling something with screws and bolts of different lengths, or it has different nuts, etc., you can write down what bolt goes where and in which compartment it's in. If you have to walk away from the job, you know that everything will be properly organized when you come back. Plus the locked boxes and bags will ensure that nothing gets spilled everywhere to either be mixed-up or lost all together.

Take it from me, it will take some time to build up some of those skills, but it can be done. And when you know ways to make your job easier, that also helps to make the repairs themselves easier and not seem so bad. And that'll lead to less time in the garage and more time on the road! Not to mention more money in your pocket for more project cars!

Delorean Industries
05-09-2012, 12:18 PM
Why is the 11mm fk'in wrench/socket always missing?

My father took a job at the University in Honolulu. I have a feeling I will be spending a good amount of time out that way. If you ever need anything just let me know!

Totally 80s
05-09-2012, 02:31 PM
Sounds like a good many of your "I suck at cars" problems are the result of poor/lazy decisions rather than not understanding the work.


Nah, before this happened I didn't know line wrenches were required. I thought they were one of those optional things that only pros used. I had heard of them but didn't think they were required. I've changed probably 20 hard fuel, radiator and brake lines in the past 10 years with my regular wrenches with no problem whatsoever. In fact I had just removed and reinstalled this exact hard line no more than 6 months ago with the same tool that rounded it off yesterday.

Also, I am curious how me sighting one example of my problems over the last decade brought you to the understanding that most of my problems stem from being lazy. WTF? :headscratch:

I'll tell you one more thing that causes me problems to is my huge hands. I am 6'6 and it's tough getting these hands into certain places. Plus being that tall wrecks my back when bending over or trying to maneuver under the car. A lift would definitely be awesome. My only saving grace is that my wiener is big enough that I can use it as a third hand.

thirdmanj
05-09-2012, 02:49 PM
Yeah man, I'm with you too. I'm actually a mechanic (not cars) by profession, but I still suck at it. I always seem to end up breaking stuff too. So much of it seems to be trial and error. Having never done some of the most basic maintenance items before, some stuffs just a bit complicated. Ever do a job, get done with it, and realize that it really was easy or not as hard as you thought and that if you had to do it again it would be no prob? I find that happens to me a lot. I also get your feelings of "I should know how to do this". Sometimes, you just have to decide if learning as you go is more important/cost effective, or "contracting" it out so to speak is just better. Not everyone has the time, mechanical inclination, or facilities to do automotive work. So I always keep a trustworthy mechanic's number handy, and DMCTalk at the ready. This site has probably saved me so much time and money, it's awesome. But it sure is nice to know someone else has a similar issue. I'M NOT ALONE!! :lol:

ccurzio
05-09-2012, 02:57 PM
Also, I am curious how me sighting one example of my problems over the last decade brought you to the understanding that most of my problems stem from being lazy. WTF? :headscratch:.

Because that was the sole example you pointed out. Besides, I said "many" and not "most". If the one example you highlight was the result of "I could have done it the right way but I didn't feel like it", that's the expressway to a judgement call.

Everything else aside, I too would love a lift. And I'm not even much of a car guy.

Kenny_Z
05-09-2012, 09:05 PM
I love cars and working on them for the most part. Losing tools while working on the car is my biggest problem. I set the wrench down while I'm trying to get my hands into a spot and then I can't find the blasted thing. One of the most common phrases you'd hear me mutter or shout is "I just had the f***ing thing!" Normally I don't curse but working by myself on a car is a great way to get out frustration.

I did a lot of car repair work with my father growing up but I was usually holding the flashlight or fetching tools. I started really learning repair on my Nova as I tore her apart. I learned to weld and rebuild an engine with that car. She's still in restoration (8 years :( ) but she's the reason I have a running classic Mustang and my Delorean. I bought Red confident that I could tackle any issue she threw at me short of A/C and transmission work.