View Full Version : How to fix your AC at home with a cross reference part
stevedmc
05-29-2012, 04:58 PM
The blower motor in my AC at home finally quit working. I was able to cross reference the part and managed to fix it for $10 instead of spending hundreds of dollars on an exact fit part.
10723
dvonk
05-29-2012, 05:48 PM
our blower motor died in the summer of 2010; we had a vintage (c. '89) furnace and, as a new home owner, no one told me that i needed to oil the blower motor bearings. the bearings dried up and the capacitor blew because the motor was working too hard. the a/c compressor was still working, but since no air was moving to exchange heat into the refrigerant, the lines froze. the repair guy installed a new capacitor and i oiled the motor bearings and everything was back to normal.
how well does that box fan circulate the air? does it keep the lines from freezing?
Bitsyncmaster
05-29-2012, 07:02 PM
The blower motor in my AC at home finally quit working. I was able to cross reference the part and managed to fix it for $10 instead of spending hundreds of dollars on an exact fit part.
10723
I hope you never work on airplanes.
Notifier
05-29-2012, 11:00 PM
The blower motor in my AC at home finally quit working. I was able to cross reference the part and managed to fix it for $10 instead of spending hundreds of dollars on an exact fit part.
10723
Did the "Fan Fail" light come on?
stevedmc
05-30-2012, 01:23 PM
Did the "Fan Fail" light come on?
Frankly I don't need a fan fail light to know when there is a problem. I've never undnerstood Delorean owners who work so hard to get a stupid light to work in their car. I know when my fan is or is not working. I don't need a stupid indicator light.
Notifier
05-30-2012, 02:31 PM
Frankly I don't need a fan fail light to know when there is a problem. I've never undnerstood Delorean owners who work so hard to get a stupid light to work in their car. I know when my fan is or is not working. I don't need a stupid indicator light.
The heat pump in my old house had a "compressor fail" light. Guess it would come on when the compressor wasn't working. I always figured you would figure that out in about 15 minutes on a hot day. Reminds me of the fan fail light on our cars.
The fan fail light on my car is on when the fans are on. Result of the fan controller that was installed. I've gotten used to ignore it just like the "lock doors" light!
Bitsyncmaster
05-30-2012, 06:15 PM
The heat pump in my old house had a "compressor fail" light. Guess it would come on when the compressor wasn't working. I always figured you would figure that out in about 15 minutes on a hot day. Reminds me of the fan fail light on our cars.
The fan fail light on my car is on when the fans are on. Result of the fan controller that was installed. I've gotten used to ignore it just like the "lock doors" light!
The fan fail light will tell you if one fan is not working (maybe a blown fuse). It gives you a little warning before you my see an overheating engine.
stevedmc
05-31-2012, 04:02 PM
The fan fail light will tell you if one fan is not working (maybe a blown fuse). It gives you a little warning before you my see an overheating engine.
My temp gauge tells me if I have a problem. I don't rely on fans alone to ensure my cooling system is working properly. Honestly, I don't even need fans since most of my driving is on the highway.
Bitsyncmaster
05-31-2012, 07:51 PM
My temp gauge tells me if I have a problem. I don't rely on fans alone to ensure my cooling system is working properly. Honestly, I don't even need fans since most of my driving is on the highway.
Think of the weight you would save by removing the fans.:race:
Your good to scan your gauges that often. Wish I did that.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.