Clock Issues

[DeLorean03]

He everyone,

So, my clock has never kept accurate time. The end of each week, it'll always be 10-15 minutes ahead of real time. I know I have to adjust the capacitor behind the display; I just don't worry much about it. But then this happened...

My clock has STOPPED keeping time. It is stuck solid on 12:00 - and the ":" doesn't blink (cant remember if it ever did or not), and it does not change time at ALL. It has been noon in my car for a solid week :P.

It's not a huge issue, but does anyone know why it would all of a sudden do this? Just curious for fun and education's sake.

[Jimmyvonviggle]

It's like groundhog day with a DeLorean...sorry have no idea.

[Nicholas R]

Not sure about why the time would stop.

On a side note, I do recall on the .com site, someone a LONG time back posted about how you can actually adjust the speed of the clock by turning a screw inside the clock. I actually saved the post because it was such good info. Unfortunately I saved it to an external hard drive that has since bit the dust.

Does anyone remember this? My clock seems to pick up about 1 minute per week; obviously not terrible but still annoying.

EDIT: After reading your post again, is the capacitor adjustment the thing I'm talking about?

[Nicholas R]

Also I just went down and checked and yes, the ":" should be blinking

[john 05141]

Are we talking the clock from were we're going, where we are or where we were?

Sorry couldn't resist...:hihi:

John

[Kenny_Z]

Much like another product of the 1980s (the VCR) the 12 o'clock issue can be solved with a little piece of black electrical tape. ;)