jawn101
06-14-2012, 08:48 PM
Again, I pulled this out the other day to clean it and renew the bushings. I swear I put it back how I found it, but looking at the parts diagram it appears to be backwards. Not just assembled backwards but constructed that way.
Can anyone weigh in on whether I put this together right?
Here's mine: notice that the gearchange tube is to the left of the linkage, with the bolt coming through from the left. Nut is on the right. But the linkage appears to be incorrectly oriented when compared to the parts diagram (the "lip" that overhangs is on the right, not the left)
http://dmctalk.org/attachment.php?attachmentid=11003&d=1339721284
Here's the parts diagram:
http://store.delorean.com/images/Category/large/4-2-0.gif
Can anyone weigh in on whether I put this together right?
Here's mine: notice that the gearchange tube is to the left of the linkage, with the bolt coming through from the left. Nut is on the right. But the linkage appears to be incorrectly oriented when compared to the parts diagram (the "lip" that overhangs is on the right, not the left)
http://dmctalk.org/attachment.php?attachmentid=11003&d=1339721284
Here's the parts diagram:
http://store.delorean.com/images/Category/large/4-2-0.gif