PDA

View Full Version : What if the Delorean was a front engine car



nimaside
06-22-2012, 08:11 PM
I'm sure most have seen this picture, and may know who's car this is. I guess it proves that an engine can fit in the front, at least todays engines.

http://i77.photobucket.com/albums/j50/nimoxp/557649_3810707145721_1218754123_33792240_49955145_ n.jpg

I'm wondering if a Delorean could have maintained its looks while having a front engine rather then a rear, back in 1981. In fact it seems like alot of people think it is front engined with it's fake grill and rear windows etc.

Would the Delorean have have performed better with a front engine? The weight ratio of the Delorean is 70 rear to 30 front right?

So maybe I'm answering my own questions. The rear engine is maybe more of a gimmick, cause with a front engine it would have allowed so much more room in the car, and perhaps a better weight balanced car. If it was mid-engined then I think that would make more sense.

Does anyone know why it was rear engined, and do you think it was a mistake?

timothymoore
06-22-2012, 08:58 PM
i think that it might have performed better with a front engine, atleast in the handling aspect anyways. if it were a front engine at that time you probably would have put a power steering pump on it losing horsepower. but if it were a front engine, i bet it probably would have had a V8 of some sort in there. probably a ford V8 or higher powered european engine given the fact he probably wasnt liked at GM too well to have bought engines and trans from them.

Nicholas R
06-22-2012, 10:15 PM
Keep in mind that that car does not have a DeLorean frame under it. The frame for this car was custom made by hand. This is a picture of it:
http://www.gendreaumicrosystems.com/tenpointtwo/pictures/f23.jpg

I think the best thing would have been if it could have actually kept the "mid engine" plan. Though that pretty much just means that, like the Fiero, we would have had no parcel shelf at all.

timothymoore
06-22-2012, 10:37 PM
the front engine Delorean is something id like to see. i think it would be interesting

vwdmc16
06-22-2012, 10:39 PM
I imagine it would have been difficult to allow the hood to remain that low if there was and engine up there, I have daydreamed about a F/R delorean ( front engine, rear drive) would have a huge trunk huh!

nimaside
06-22-2012, 10:50 PM
Keep in mind that that car does not have a DeLorean frame under it. The frame for this car was custom made by hand.

I think the best thing would have been if it could have actually kept the "mid engine" plan. Though that pretty much just means that, like the Fiero, we would have had no parcel shelf at all.

Wow, I actually didn't know about the changed frame. Thanks for the info.

Squall67584
06-22-2012, 11:31 PM
I did a few crappy model mockups using the old BTTF car and other car's engines. I think a front engine mounted behind the front axle centerline and having a torque tube with rear mounted transaxle would fit under the low hood. I used a Corvette LS1 with a dry sump setup, but a Subaru boxer, like the 6 cylinder with a turbo would be cool.

Nicholas R
06-22-2012, 11:46 PM
I did a few crappy model mockups using the old BTTF car and other car's engines. I think a front engine mounted behind the front axle centerline and having a torque tube with rear mounted transaxle would fit under the low hood. I used a Corvette LS1 with a dry sump setup, but a Subaru boxer, like the 6 cylinder with a turbo would be cool.

To fit under the hood in front, an LS1 would just about have to be dragging the ground, haha.

In the twin engine car, if I recall correctly, it's a 4 cyl honda prelude engine in the front right?

The boxer would be the most ideal. There's definitely enough width for it and those engines have so little depth by design. I briefly considered that before the LS1. My friend has an STI with the turbocharged boxer and good lord is that thing quick. Certainly would be something in the DeLorean (especially if you could get all wheel drive like the subaru's haha)

Squall67584
06-22-2012, 11:56 PM
To fit under the hood in front, an LS1 would just about have to be dragging the ground, haha.

In the twin engine car, if I recall correctly, it's a 4 cyl honda prelude engine in the front right?

The boxer would be the most ideal. There's definitely enough width for it and those engines have so little depth by design. I briefly considered that before the LS1. My friend has an STI with the turbocharged boxer and good lord is that thing quick. Certainly would be something in the DeLorean (especially if you could get all wheel drive like the subaru's haha)

In the mock up, the LS1 was pretty low, even with the dry sump. If using the boxer setup, with AWD the engine would be in front of the front axle centerline. It would also go against JZD's thoughts about what the front wheels should be used for ;-)

dvonk
06-23-2012, 01:05 AM
I'm sure most have seen this picture, and may know who's car this is...

for posterity, the VIN of the dual-engined D is 11472.

nimaside
06-23-2012, 03:14 AM
In the twin engine car, if I recall correctly, it's a 4 cyl honda prelude engine in the front right?



Yep, it's a Prelude 2.0 four cylinder engine.

Here's the link to the owners site or ex owner. I know the car has been on ebay a few times. Not sure where it is.

I know Chris B has seen the car, maybe he knows. I think he didn't like it. I'm really surprised that no one else has tried making a front engine delorean.

I noticed on this website the guy said he had a hard time finding an engine that would fit in the front and the prelude was the only one.

http://www.gendreaumicrosystems.com/tenpointtwo/11472index.htm

ccurzio
06-23-2012, 10:07 AM
I'm really surprised that no one else has tried making a front engine delorean.

I'm not. It requires far too much custom work.

The only real incentive I can think of is to try it because it's never been done before. Now that it has, well, what's the point?

Nicholas R
06-23-2012, 10:57 AM
I'm not. It requires far too much custom work.

The only real incentive I can think of is to try it because it's never been done before. Now that it has, well, what's the point?

I agree. Not surprised if it hasn't sold. That car is nuts. I saw the car and talked to the owner back at DCS04 before it was finished. It was certainly impressive but unbelievably complicated getting the 2 engines to work together. I cant imagine anyone wanting to figure that car out just to have as a hobby car.

Dracula
06-23-2012, 04:17 PM
I love the Cadillac 500 cu. in. engine in the rear and would do something similar if I had the time. Maybe someday.

DMCMW Dave
06-23-2012, 04:58 PM
What ever happened to that car? I heard he gave up on getting it to run right but it sort of disappeared.

There you go Chad, get that one and just dump the front engine.

nimaside
06-23-2012, 05:31 PM
I'm not. It requires far too much custom work.

The only real incentive I can think of is to try it because it's never been done before. Now that it has, well, what's the point?

I can accept that it may be too much custom work and that it would take someone with alot of time on their hands to do, but i wouldn't quite say it has been done before.

Just because this is 2 engined car. I'm talking about just a front engine. That way you can have an actual rear trunk, or maybe have room for rear seats... Who knows what it would look like when you have the back area cleared. Anyway, I showed this project just as an example for my original post question. I never thought of this as a front engine car...more of a freak car.

Rich W
06-23-2012, 05:34 PM
Rick G. was down in Florida last week. He sent me an
email just before I left on June 11, letting me know he
would be down there.

Farrar
06-23-2012, 06:18 PM
The DMC-12 was to originally have had a mid-engine layout. This was scrapped when the Citroën 4-cylinder was replaced with the PRV 6-cylinder.

dmcjohn
06-23-2012, 08:06 PM
I can accept that it may be too much custom work and that it would take someone with alot of time on their hands to do, but i wouldn't quite say it has been done before.

Just because this is 2 engined car. I'm talking about just a front engine. That way you can have an actual rear trunk, or maybe have room for rear seats... .

At first, I looked at making my 4 seater DeLorean front engined for exactly that reason - to free up the space at the rear of the car. It would have fitted an inline Ford Zetec 4 cylinder, with the transmission sitting in the current fuel tank area, and a driveshaft going back to the rear. I also measured up the Subaru Imprezza boxer engine which would also have fitted. It could definitely be done, but when I found the rear engine could still work, I went with that instead - 2 main reasons being firstly to keep the car as close as possible to how the original DMC may have built a 2+2 version of the car, and secondly I was concerned about being able to register the car for use on the road (in Ireland) after having put the engine at the wrong end of the car.

Still though I would love to go back and try it someday to another project car, as I think the rear of the car looks quite sleek when there is no engine back there and you can use a regular glass rear window as per the mockup attached. Also, as you say, you would have a much more useable trunk.

11360

11361

Squall67584
06-23-2012, 09:36 PM
At first, I looked at making my 4 seater DeLorean front engined for exactly that reason - to free up the space at the rear of the car. It would have fitted an inline Ford Zetec 4 cylinder, with the transmission sitting in the current fuel tank area, and a driveshaft going back to the rear. I also measured up the Subaru Imprezza boxer engine which would also have fitted. It could definitely be done, but when I found the rear engine could still work, I went with that instead - 2 main reasons being firstly to keep the car as close as possible to how the original DMC may have built a 2+2 version of the car, and secondly I was concerned about being able to register the car for use on the road (in Ireland) after having put the engine at the wrong end of the car.

Still though I would love to go back and try it someday to another project car, as I think the rear of the car looks quite sleek when there is no engine back there and you can use a regular glass rear window as per the mockup attached. Also, as you say, you would have a much more useable trunk.

11360

11361

Now that looks nice!

nimaside
06-24-2012, 02:17 AM
Very cool and interesting Graphics!