PDA

View Full Version : Which motor would you prefer in your Delorean?



Chris Burns
06-24-2012, 08:12 PM
Noticing some of the crazy motor swaps in Deloreans lately, I had to ask. Which motor would you prefer in your Delorean?

Squall67584
06-24-2012, 08:31 PM
I voted for stock, but in a Spec II trim with EFI 8)

ssaleen
06-24-2012, 08:32 PM
None of those! I would love a 5.0 ford or the 351.
But I guess I'll just stick with the stock motor, it's cheaper!!:ninja:

Nicholas R
06-24-2012, 08:40 PM
Just voted. I wont say what for though...

qwerk
06-24-2012, 08:44 PM
If I were going to do an engine swap, it would have to be either a 2ZZ-GE or an F20C. Two interesting engines, in my opinion.

Barring that, I'd just keep it stock.

Squall67584
06-24-2012, 08:49 PM
If I were going to do an engine swap, it would have to be either a 2ZZ-GE or an F20C. Two interesting engines, in my opinion.

Barring that, I'd just keep it stock.

F20C the engine from an S2000? I drove a friend of mine's for a day and found it to be rather torque-less anywhere under 6K. Coupled with the UN1 transaxle's gearing, I think it would be rather unimpressive unless driven in the upper range.

qwerk
06-24-2012, 09:01 PM
F20C the engine from an S2000? I drove a friend of mine's for a day and found it to be rather torque-less anywhere under 6K. Coupled with the UN1 transaxle's gearing, I think it would be rather unimpressive unless driven in the upper range.

The VTEC doesn't kick in until around 6k, so that's why. It's actually a similar story with the Toyota engine. A valid point though. Maybe not an ideal swap, but something I'd consider, if I were considering a swap, just because those engines interest me.

steel-and-fire
06-24-2012, 09:20 PM
I would keep the stock motor, but rebuild it to handle a twin turbo setup.
Walk that line between custom and stock.

Chris Burns
06-24-2012, 09:25 PM
I'm happy with the stock motor myself (especially if it were on a daily driver Delorean!).:smile:

There was a Delorean at DCS from NJ that had a Acura V-Tech motor mounted to a Porsche transmission. Very clean install and some great LED lights everywhere.

Nicholas's Delorean is not to be triffled with. I watched his Delorean drive a little at DCS and you can just tell that car was REALLY fast! It would give a modern sports car a run for it's money.:headbang:

I'm a bit of a purist when it comes to Deloreans, but it's always interesting to see what people come up with as long as it's not another wasted Delorean sitting in a junkyard:banghead:

dvonk
06-24-2012, 09:31 PM
Just voted. I wont say what for though...

:giggle:

Squall67584
06-25-2012, 01:39 AM
This thread made me try to remember all the "successful" engine swaps that have been done, and better yet, wonder where they are now. There was the 3 rotor one about 10 years ago but other than the 1 YouTube video, nothing else. There was the 302 Ford that looks to just idle on YouTube as well. The Northstar conversion apparently was seen but not driven? On DMCEurope there's a project showing a Northstar. There's also the two or three on the board, the VQ35, the LS1, and one where a 302 was being swapped in. I think I remember a member mentioning an Acura TL swap, something to do with their AC if memory serves.

Any I've missed? And where are they now?

dvonk
06-25-2012, 01:49 AM
dont forget about VIN 16872 with the 351 Cleveland (http://dmctalk.org/showthread.php?3700-Anyone-remember-this-Delorean-from-the-old-DMC-Talk-351-V8-powered-Delorean)... :evilgrin:

SIMid
06-25-2012, 02:34 AM
Maybe from the Lotus Europa lump for something different.

11381

My regular ride is the Astra AH SRi Turbo and with some software tuning, she can put out some great numbers. Compact unit and many parts available across the planet.

yellowmxwheels23
06-25-2012, 03:43 AM
I'd throw a Subie wrx sti motor in there

timothymoore
06-25-2012, 09:14 AM
if i were to do a motor swap in my Delorean, the engine id pick off that list would be the chevy 4.3 v6 with the X vin code. have 190 hp with 210 or 220 foot pounds of torque stock, with a build you could be at 300 hp in no time. but if i would pick one not on this list, id pick a GM 3.8 Litre supercharged V6. 3.8 is a great motor with 200 or so horspower without a supercharger, should be at or above 300 hp with a supercharger and still get good gas mileage.

opethmike
06-25-2012, 11:54 AM
I voted for stock, but in a Spec II trim with EFI 8)

I have that exact set-up. As far as a naturally aspirated 2.85 PRV goes, it is fantastic. 0 to 60 in ~6.7 seconds, better than stock gas mileage, great idle. I could go on and on.

My "if I won the lotto" engine swap would be the charged cool turbo engine out of an S4 Esprit. I absolutely love that engine.

tjd
06-25-2012, 11:58 AM
What about the Lotus Turbo V8 from an Esprit? The car was known as the DeLotus.

opethmike
06-25-2012, 12:21 PM
I'm really not a fan of the V8. Very problematic engine, difficult to do what should be simple jobs like timing belts without ridiculous tools, have to remove the plenum to change just about anything, etc.

Mark D
06-25-2012, 02:30 PM
I'd throw a Subie wrx sti motor in there

Love the way those engines sound...

...make sure to have spare head gaskets on hand though. :wrenchin:

Rich W
06-25-2012, 04:10 PM
My 1983 Canadian Spec (metric cluster) DeLorean is running a GM 3.8L Turbo V6 and it was originally converted (swapped) over a decade ago.

The engine is from a 1984 Buick Grand National and it has a custom bell-housing, custom flywheel, custom crank bearing "cup", as well as
some significant changes and additions to the engine mounts and transmission mounts, with very few "cuts" into stock parts in the engine bay.

While this engine is a good fit, for a number of reasons, there are also areas where it is lacking. Since it is the early "hot air" 3.8L Turbo V6,
it does not have the intercooler and relocation of the turbo that the later Grand Nationals had (in the 86 and 87 models, but harder to fit in a D).

Even with my well-vented engine compartment, the engine suffers with its performance, once temps get into the 80's and 90's during Summer,
but it does well when the temps are below 70, and it really starts breathing well the few times I have driven it in good weather, below freezing.

I have a few new mods that I plan to add later this year or over the Winter, so we will see how this beast performs after the new mods.

Later,
Rich W.


if i would pick one not on this list, id pick a GM 3.8 Litre supercharged V6. 3.8 is a great motor with 200 or so horspower without a supercharger, should be at or above 300 hp with a supercharger and still get good gas mileage.


BTW: Like any older engine, it is starting to get more difficult to find some of the parts for the early Buick 3.8L Turbo V6 engine.

stevedmc
06-25-2012, 04:22 PM
There was only one engine at DCS that really excited me. I'll give you a hint. It had a stock EFI system on top of it.

timothymoore
06-25-2012, 11:01 PM
My 1983 Canadian Spec (metric cluster) DeLorean is running a GM 3.8L Turbo V6 and it was originally converted (swapped) over a decade ago.

The engine is from a 1984 Buick Grand National and it has a custom bell-housing, custom flywheel, custom crank bearing "cup", as well as
some significant changes and additions to the engine mounts and transmission mounts, with very few "cuts" into stock parts in the engine bay.

While this engine is a good fit, for a number of reasons, there are also areas where it is lacking. Since it is the early "hot air" 3.8L Turbo V6,
it does not have the intercooler and relocation of the turbo that the later Grand Nationals had (in the 86 and 87 models, but harder to fit in a D).

Even with my well-vented engine compartment, the engine suffers with its performance, once temps get into the 80's and 90's during Summer,
but it does well when the temps are below 70, and it really starts breathing well the few times I have driven it in good weather, below freezing.

I have a few new mods that I plan to add later this year or over the Winter, so we will see how this beast performs after the new mods.

Later,
Rich W.




BTW: Like any older engine, it is starting to get more difficult to find some of the parts for the early Buick 3.8L Turbo V6 engine.

i think i remember seeing that car on the DCS2008 dvd if i remember correctly? that car looks badass, but the 3.8s im referring to although other than age, im not sure what the differences are as far as power or engineering, havent researched it are the late 90's and forward.i had a 2000 impala with the 3.8 as well as a 98 camaro with the 3.8 and those cars would absolutely scream. i beleive they were both rated at 200-210 BHP

Mike C.
06-26-2012, 12:09 AM
I'd just vote to buy a proper fast car :dunno:

SIMid
06-26-2012, 12:17 AM
I'd just vote to buy a proper fast car :dunno:

But it still wont look as good as a Delorean. ;)

Rich W
06-26-2012, 02:01 PM
Yes, you are correct. My Grand National Powered DeLorean was at Gettysburg and it was also featured on the DCS 2008 DVD.

Having done engine swap projects in DeLoreans and in other vehicles, the "older" technology is often easier to adapt to some vehicles,
since you do not need include much, if any, of the engine wiring harness, computer(s), sensors and other controller(s) from the donor
vehicle. There are several different sources for "plug-in, fake-out sensors" so you do not need to use entire donor wiring harnesses.

There is a local Chicago area company that specializes in these "plug-in, fake-out sensors" for several different engine types and sizes,
but they started making parts for the Buick 3.8L engine and they are now making parts for several different GM engine types and sizes.
I will list their current contact info below, as soon as I come across it.

Thanks,
Rich W.


i think i remember seeing that car on the DCS2008 dvd if i remember correctly? that car looks badass, but the 3.8s im referring to although other than age, im not sure what the differences are as far as power or engineering, havent researched it are the late 90's and forward.i had a 2000 impala with the 3.8 as well as a 98 camaro with the 3.8 and those cars would absolutely scream. i beleive they were both rated at 200-210 BHP


Vendor Contact Info:

Casper's Electronics, Inc.
1111 Rose Rd.
Lake Zurich, IL 60047

John Spina
847.847.1544
[email protected]

http://www.casperselectronics.com/

Nicholas R
06-26-2012, 08:33 PM
Yes, you are correct. My Grand National Powered DeLorean was at Gettysburg and it was also featured on the DCS 2008 DVD.

Having done engine swap projects in DeLoreans and in other vehicles, the "older" technology is often easier to adapt to some vehicles,
since you do not need include much, if any, of the engine wiring harness, computer(s), sensors and other controller(s) from the donor
vehicle. There are several different sources for "plug-in, fake-out sensors" so you do not need to use entire donor wiring harnesses.

There is a local Chicago area company that specializes in these "plug-in, fake-out sensors" for several different engine types and sizes,
but they started making parts for the Buick 3.8L engine and they are now making parts for several different GM engine types and sizes.
I will list their current contact info below, as soon as I come across it.

Thanks,
Rich W.


Rich with all due respect I have to disagree a little. The LS1 was a breeze to hook up. Just downloaded the pinouts online, sent fused power where needed, grounded what was needed, and sent the output to the proper places. Hell, my friends 73 charger with a big old 4 barrel edelbrock carb on top of a 360 was SO much more work. Between a corroded carb needing a rebuild, setting point gaps, timing advance, and more, after a year it still has it's quarks. It was certainly a lot of work to get the LS1 into the car, but once it was in, it was unbelievably easy. I have never had a car go from the "ok it's time to turn the key and start it the first time" to "its running, its running, holy $%^& it's actually running" so quickly. That interval was about 10 minutes. The video of the car starting the first time, really is the first start, and that was about the 4th time I tried turning the key. (first time I forgot to ground the neutral switch for the starter relay, second time I had the crank pos sensor unplugged, 3 time I realized the fuel lines were backward on the regulator, fourth time: vroom vroom)

Yes I needed the computer and wiring harness, but it was a given that those would come with the engine when I bought it. Plus any normal engine swap project is going to require quite a bit of custom wiring. The only special thing I had to do was have the computer programmed, which took 10 min at a local speed shop. The guy plugged it in with me standing there and said, "you want downstream O2?'s" "Nope" "You want EGR?" "Nope" "You want engine controlled fans?" "Nope" "You want engine controlled AC?" "Nope" "Any communication with the transmission?" "Nope" "You want fuel evap re-circulation?" "Nope" "Deleting all antitheft and passkey now, adding stock vette tune and you're good to go".

You know what I would say the best thing about the LS1 is? Computerized timing. No mechanical distributor. All timing, both fuel and spark is done by the computer. Since first start, it's been idling beautifully.

Now dont get me wrong, I'm not naive enough to think all engine swaps are like this. If anyone saw the Supra car at DCS with the Laptop out, it's because the laptop is used to program the second mini computer that piggybacks the engine computer so it think's its still in the Supra. It's just one more thing to account for. I'm sure the Acura car had special things to consider too. It's just about knowing what you're dealing with. Same as the carb/efi/k-jet debate. Preference comes from personal knowledge and what each individual is comfortable with. The LS1 was great but I'm not about to try to drop a Supra or Buick engine into a car now...

pezzonovante88
06-27-2012, 12:12 AM
I'll go with stock, but with stage II.

Dracula
06-27-2012, 12:47 PM
Where's the 500 cu. in. Cadillac motor?

nimaside
07-03-2012, 11:54 AM
If I had a delorean I'd really would want to change the engine cause I really don't like the stock sound, and it doesn't seem very reliable. I would want a very reliable engine. Something like a honda accord I-4 engine (my automatic 06 accord i4 does 0 to sixty in 7.4 seconds so I'm thinking it would push the delorean even quicker..maybe?) if it would fit. It would be nice to have like a 350z engine in there, but I have no Idea if it would fit.

Is the only way to figure if an engine will fit in the Delorean to measure the size of the engine?

ccurzio
07-03-2012, 11:56 AM
If I had a delorean I'd really would want to change the engine cause ... it doesn't seem very reliable

Oh? Do tell. Why do you believe this?


Something like a honda accord I-4 engine (my automatic 06 accord i4 does 0 to sixty in 7.4 seconds so I'm thinking it would push the delorean even quicker..maybe?)

A Honda Accord is also a lot lighter than a DeLorean. Weight does play a factor in engine performance.

Do you understand cars at all?

nimaside
07-03-2012, 12:07 PM
Oh? Do tell. Why do you believe this?



A Honda Accord is also a lot lighter than a DeLorean. Weight does play a factor in engine performance.

Do you understand cars at all?

Why do you sound so harsh. I'm asking cause yes I am ignorant when it comes to cars engines and delorean engines.

The reason I figured the PRV engines weren't very good is that even the new builds houston are releasing seem to have problems, Idling issues, whatever. Maybe I'm wrong. Maybe the Delorean engine is wonderful?

The stock weight of my accord coupe is 2,954 lbs which I think is about the same weight. I'm into cars, but engines, I am not very knowledgeable.

Teach me. Don't insult me, huh? That's why I'm here.

ccurzio
07-03-2012, 12:12 PM
I sound harsh because I'm an asshole.

But that only comes out when I see some pretty off-base statements. If you're "ignorant" when it comes to cars and engines, then to say that the PRV6 "seems unreliable" is a bold and uneducated statement that you really shouldn't have made.

Do you have a reference for the problems that the DMCH new-builds are having? I wasn't aware they made many of them, and your post is the first I've heard of any technical problems they're having.

nimaside
07-03-2012, 12:20 PM
I saw a new build on youtube searching for the right idle...or what ever it's called when you start that car up and it seem to keep revving on its own. It seemed embarassing.

Another example is of a user here who i can't remember his user name. It wasn't a new build, but fully refurbished DMCH and he paid a heck of a hole lot and waited a year or so. Then he started with threads consisting of problem after problem with seems unacceptable for what he paid for that car. Maybe someone knows who I'm talking about. It was on the old site before it changed to org,so I guess those threads are long gone.

Oh, another example is that car Jay Leno tested. It was doing that. I think that was a new build.

opethmike
07-03-2012, 12:55 PM
Yeah, what nimaside is saying about those cars is true; and I know which cars he's talking about. However, those are the results of poor build quality, not the inherent design of the engine or the fuel system.

In the five years that I've had my car, my engine has been fine, and my K-Jet never gave me any problems while I still had it.

Chris Burns
07-03-2012, 06:56 PM
I saw a new build on youtube searching for the right idle...or what ever it's called when you start that car up and it seem to keep revving on its own. It seemed embarassing.

Another example is of a user here who i can't remember his user name. It wasn't a new build, but fully refurbished DMCH and he paid a heck of a hole lot and waited a year or so. Then he started with threads consisting of problem after problem with seems unacceptable for what he paid for that car. Maybe someone knows who I'm talking about. It was on the old site before it changed to org,so I guess those threads are long gone.

Oh, another example is that car Jay Leno tested. It was doing that. I think that was a new build.

The idle issue is usually caused by a vacum leak or a bad idle ECU which is behind the driver's compartment. The engine are quite reliable actually. At DCS this year there were 50 Deloreans, some were trailered in, most of the ones I saw were drivers. One gentleman drove his for 15 hours and made it safely:rollin:

Ask Oliver with his BTTF Delorean with 300k miles. His car has been to every state in the US and back many times and is still rollin.:wiggle:

Every classic car has issues, but thankfully they are easier to tinker with than modern cars!

ccurzio
07-03-2012, 08:02 PM
Every classic car has issues, but thankfully they are easier to tinker with than modern cars!

This is very true, and it's one of the reasons I like working on the DeLorean. Hell, it's one of the reasons I'm ABLE to work on the DeLorean.

Ron
07-03-2012, 11:30 PM
Yeah, what nimaside is saying about those cars is true; and I know which cars he's talking about. However, those are the results of poor build quality, not the inherent design of the engine or the fuel system.

In the five years that I've had my car, my engine has been fine, and my K-Jet never gave me any problems while I still had it.
+1 I hated to see him have so much trouble. I don't know if he ever said, but it seemed as if he just got fed up, dumped it, and disappeared...

Dangermouse
07-04-2012, 12:36 AM
+1 I hated to see him have so much trouble. I don't know if he ever said, but it seemed as if he just got fed up, dumped it, and disappeared...

Panoz guy or clean-your-grounds-guy?

Ron
07-04-2012, 10:27 AM
Panoz guy or clean-your-grounds-guy?
Panoz (Canon20Dfan).

Who's the other??

Iznodmad
07-04-2012, 11:17 AM
Panoz (Canon20Dfan).

Who's the other??

I think he is talking about username JIMJAM in SC, but that car has never been to DMCH and is not a DMC refurb car AFAIK. I knew the PO of his car very well.

Ron
07-04-2012, 11:57 AM
It's almost been a month since he posted, but Jim still has his D...

Dangermouse
07-04-2012, 12:13 PM
My mistake. I thought Jims car was a refurb.

Ron
07-04-2012, 12:21 PM
I'm sure he feels like it is ;)

DashEight
07-26-2012, 04:16 AM
Not on the list but I'm going to say:

Toyota/Lexus 1UZFE V8

DMCVegas
07-26-2012, 01:52 PM
There's a lot of engine options not on the list. It would be nice if this thread were a wish list instead of a restrictive poll.

Rich W
07-26-2012, 03:11 PM
Not on the list but I'm going to say:

Toyota/Lexus 1UZFE V8

Yeah, I am a fan of this engine as well.

In Lexus GS 400 trim, this engine has 300 hp and 310 ft/lb of torque.

Whenever gas prices fall a bit, I drive my GS 400 a little more to work.

Later,
Rich W.

DMC3165
07-27-2012, 06:28 PM
Of the choices I picked the ls1 motor. But if money was no object I'd say the W 16 out of a Bugatti Veyron SS. Or whatever powers the LFA Lexus. That thing sounds amazing!!!

DMCVegas
07-29-2012, 04:53 AM
I've had a long list of engines that I've wanted to toy with over the years. But if I were going to get serious about doing an engine swap now days I'd need something that has a relatively good parts supply, aftermarket support, and a large fan base with a loyal following. My choice right now would probably be a Subaru EJ-Series engine.

Will it fit? Don't know. But if it can be shoehorned into a VW Beetle...

http://www.roogio.com/images/1973-VW-Beetle-Subaru-WRX-STi-engine-details.jpg

Around 300bhp in stock form, and tuned it can crank out even more power... Slap it together with a Porsche 6-Speed transaxle and imagine the fun it would be in a DeLorean.

jmast
08-09-2012, 07:49 PM
TT's FTW!!!!
http://www.specialtauto.com/delorean-parts/images/delorean-turbo-shots-1.jpg