Log in

View Full Version : Fuel Regulating



mikebrink
06-26-2012, 09:24 PM
I’m trying to start my new rebuilt engine and I’m having trouble with the fuel regulation. I’m getting fuel to the distributor and thru each injector but it seems to be getting to much fuel. When I disconnect the fuel pump and crank it over it will start and run for a couple seconds but then obviously run out of fuel. I hook up the fuel pump and it won’t start, until I disconnect the pump and crank the engine until the mixture is right and the engine fires.

dmc6960
06-26-2012, 10:10 PM
You need to "crack the injectors". This is setting an initial mixture point for the engine. Pull all injectors out and put them in glass jars. Pull ALL of them, don't shortcut with any or you'll wash the cylinder and dilute your oil. Jump the fuel pump to run. Watch the injectors, if spraying or dripping, turn mixture screw counter clockwise until it JUST stops dripping. And if currently not spraying or dripping, then turn clockwise until they just start, then back it off just enough to stop. Then push down on the air meter to ensure they all spray properly and then completely stop when you let go. If all good, put everything back to normal and start the engine. Once warmed up, perform final mixture adjustment.