Log in

View Full Version : Steve's new ride - 1965 Mustang



stevedmc
07-06-2012, 05:08 PM
For those of you that don't know, I fell in love with my little Ford carb so much that I went out and bought a 1965 Ford Mustang. It features an Autolite 1100 carburetor.


http://www.youtube.com/watch?v=SGDJ_-ywrb4&list=UUEzDFwV2UrRxYy_6lXifgMA&index=1&feature=plcp

thirdmanj
07-06-2012, 05:38 PM
Didn't I see this car on "Cajun Pawn Stars?"

stevedmc
07-06-2012, 05:43 PM
Didn't I see this car on "Cajun Pawn Stars?"

Beats me. I don't watch much TV.

thirdmanj
07-06-2012, 05:48 PM
Beats me. I don't watch much TV.

Well did you buy it from some Cajun pawn brokers?

stevedmc
07-06-2012, 05:53 PM
Well did you buy it from some Cajun pawn brokers?

Craiglist.

Kenny_Z
07-06-2012, 06:40 PM
Beautiful 65 coupe. Nice little bulletproof I6 too. I have one like it in my parts Mustang.

Those doors look like mine. If you can try to reskin them because the repop doors are a terrible fit. The guy that owned my 66 first tried two sets of repop doors before he just bondoed over the holes in the originals. Ah, the sins of a previous owner.

What are your plans for her?

stevedmc
07-06-2012, 06:45 PM
Beautiful 65 coupe. Nice little bulletproof I6 too. I have one like it in my parts Mustang.

Those doors look like mine. If you can try to reskin them because the repop doors are a terrible fit. The guy that owned my 66 first tried two sets of repop doors before he just bondoed over the holes in the originals. Ah, the sins of a previous owner.

What are your plans for her?

I'm planning to get her road worthy first. Brakes are next on the list but unfortunately I am out of town until the middle of next week.

Pardon the stupid question but what are repop doors? Reproduction?

I was honestly thinking of just sanding the rust and slapping some bondo on it. Most of you guys know by now that I am not a concourse guy. I just want the thing to be reliable and look decent.

Chris Burns
07-06-2012, 07:33 PM
1st generation Mustangs are the best ones in my opinion:nana2:

Not too long ago most people the bought the I-6 Mustangs replaced the I-6 with a 289 V8 or a 302 V8. Nowadays people are going back to the I-6 motors, because they are rarer and worth something.

The I-6 motor had 120hp with a single barrel carb and came with a 3 speed manual or a 3 speed auto.

mluder
07-06-2012, 07:49 PM
There's a lot of room in that engine compartment. You should drop a V8 in there...

Cheers.
Steve

stevedmc
07-06-2012, 07:51 PM
Nowadays people are going back to the I-6 motors, because they are rarer and worth something.

I could care less what the engine is worth, its my car. But from what I've read, those little I-6 motors are reliable little devils and you can muster extra power out of them fairly easily. Simply having someone machine the head (open it up) and fitting a dual barrel carb will net 20-25 extra horsepower.

Right now the goal is to just turn it into reliable transportation but it sure would be sweet to have a little 145 horsepower mustang.

stevedmc
07-06-2012, 07:53 PM
There's a lot of room in that engine compartment. You should drop a V8 in there...

Cheers.
Steve


I have a feeling the Mustang is going to attract as many V8 comments as the Delorean gets flux capacitor comments. I didn't but the thing to race and I'm not doing any engine swaps unless this little puppy gives out on me.

If the previous owner told me the truth, this engine should have plenty of life in it. Supposedly it was rebuilt 5 years and 2k miles ago.

Nicholas R
07-06-2012, 07:58 PM
Looks like an awesome project man! Very cool! I'd love to get a project like this sometime soon to familiarize myself more with carburetors. I've never had a car that used one. I've helped extensively with several carb projects but I've only provided input and followed instructions when it came to fuel delivery.

dvonk
07-06-2012, 08:00 PM
awesomesauce. :headbang:

ccurzio
07-06-2012, 08:52 PM
I could care less what the engine is worth

If you could care less, that means you actually do care to some degree what the engine is worth (because you have the ability to care less about it). If you couldn't care less, that means you don't care.

Put a carb on it.

stevedmc
07-06-2012, 08:59 PM
Put a carb on it.

Dave Swingle wants to see me put K-Jet on it.

thirdmanj
07-06-2012, 09:11 PM
If you could care less, that means you actually do care to some degree what the engine is worth (because you have the ability to care less about it). If you couldn't care less, that means you don't care.

Put a carb on it.

I tried to post the same thing but the page wouldn't load... :lol:

stevedmc
07-06-2012, 09:17 PM
Nerds

thirdmanj
07-06-2012, 09:26 PM
Nerds

Illiterates.

stevedmc
07-06-2012, 09:33 PM
Illiterates.

I prefer the term, white trash.

Kenny_Z
07-06-2012, 11:00 PM
If the previous owner told me the truth, this engine should have plenty of life in it. Supposedly it was rebuilt 5 years and 2k miles ago.

The only what you'll damage that engine is dropping into 2nd at 3000RPM on the freeway. That's when pistons go into orbit ;)

Yeah, reproduction doors. It'll take more work to sand and bondo those doors to look decent than to reskin them.

http://uploads.m-cgi.com/kennyz/Mustang/cutlip.jpg
http://uploads.m-cgi.com/kennyz/Mustang/innerdoor01.jpg
http://uploads.m-cgi.com/kennyz/Mustang/newmetal.jpg

I have 6 hours in that door including the extra sound deadening I put in. And a pair of skins is 100 bucks: http://www.mustangsunlimited.com/itemdy00.asp?T1=DSK1+01 I welded mine but there is an adhesive as well that bonds stronger than steel. Plus I was able to POR15 all that rust and stop it from eating away at the car.

http://www.mustangsunlimited.com/ is the best site I've found for Mustang parts. Super fast shipping (order monday, get it wednesday) and excellent prices.

DeMopar
07-06-2012, 11:14 PM
I was honestly thinking of just sanding the rust and slapping some bondo on it. Most of you guys know by now that I am not a concourse guy. I just want the thing to be reliable and look decent.


Even though you haven't driven it over to show it to me yet, I did see in the photos that there is a bit of rust in the door above where the skin folds over at the bottom.

I've got the tools equiptment here to take care of that. I can break out the Mopars and we can have a Lee Iacocca Tech Day.

DMCMW Dave
07-07-2012, 12:24 AM
I was honestly thinking of just sanding the rust and slapping some bondo on it. Most of you guys know by now that I am not a concourse guy. I just want the thing to be reliable and look decent.

Going for the period-correct look I guess. If you really want the look get a couple cans of that dark red primer.

I had a very similar 65 mustang in about 1972 and it already had that rust on the doors and holes in the floor under the back seat. Rustproofing back then wasn't particularly effective, so by 5 years out it was a $250 car and a bondo/spraycan repair was pretty typical at the time. If you lived in states like PA with "cancerous rust" inspection laws, sheet metal and pop rivets were popular.

Farrar
07-07-2012, 10:26 AM
I can break out the Mopars and we can have a Lee Iacocca Tech Day.

I'm there!