Log in

View Full Version : Do we have a Official Differences Between Deloreans Thread? If not, can we make one?



adam_knox
07-24-2012, 10:30 PM
After going to DCS and reading about the A/C console plates that have 5 different designs during the production run I was sort of amazed by the number of minor differences there are to the DMC-12. Is there a site or thread that shows all of these differences? If not, I thought it would be neat to compile a photo thread of all the production variations of the car. What do ya'll think?
Here's the obvious and not so obvious differences I'm aware of:

Hoods
Louvers
A/C Panels
Interior colors
Car Stereos
Antennae
Door Pull Straps
Clock



Is there anything I'm missing? I saw that someone had a DMC logo on their automatic shifter at DCS, was that a customization or a factory production?

Cory W
07-24-2012, 11:08 PM
I have noticed the side mirror casings can be either smooth or 'textured' during the production run, with textured being the latter.

Jonathan
07-24-2012, 11:11 PM
The concours manual has all the differences. I'll upload it here in a minute when I find the file.

Tillsy
07-25-2012, 12:36 AM
I have noticed the side mirror casings can be either smooth or 'textured' during the production run, with textured being the latter.

I had noticed a mention in one of the tech or service bulletins about a replacement mirror and have wondered what the difference was - now I know!

Soundkillr
07-25-2012, 08:54 AM
A few others.....
some early cars had textured pontoons. Early autos had different (and nicer IMHO) shifter handles. Window seals stick out more on later cars, glass is more flush on early cars. Some early cars had "blanks" where a lock should go on the glove box. Rear bolsters on interior panels where two piece on early cars, and one piece on later cars.

Ron
07-25-2012, 10:46 AM
Wheels (color and design)
Antenna/windshield
Radio
Steering Wheel
Door Pull Strap

A lot of non-cosmetic things (Wiring, fittings, etc)

adam_knox
07-25-2012, 11:00 AM
That would be great if the Concurs list could be posted. I'm thinking for practicality we could limit the list to visible items, but its everyone's list, so we could make it all inclusive (if that isn't too daunting).

Jonathan
07-25-2012, 11:55 AM
That would be great if the Concurs list could be posted. I'm thinking for practicality we could limit the list to visible items, but its everyone's list, so we could make it all inclusive (if that isn't too daunting).

Here you go Adam!

http://www.millenniumconcours.com/page5.html

The file is pretty big, so I could only post the link (not the 25 MB PDF).

adam_knox
07-26-2012, 12:35 AM
Thanks! I guess that manual is pretty much exactly the kinda compilation I was looking for!

DeMopar
07-26-2012, 04:28 PM
Locking gas cap
A/C accumulator/hoses
Fascia color-early was glossy, later was satin
Later cars had roof cage riveted as well as glued, I believe
Later cars had plastic covers on quarter panel strut mounting points
Early cars had "Negative Earth" labels and later cars had "Negative Ground"
coin and ash trays changed as well IIRC

That's all I could think of off hand.

Shep
07-26-2012, 08:18 PM
Here you go Adam!

http://www.millenniumconcours.com/page5.html

The file is pretty big, so I could only post the link (not the 25 MB PDF).A few I know of that aren't on there (besides the obvious "500 series test mule" stuff):
- Door welding is different on earlier cars. Don't recall exactly how though.
- Panel alignment. Early VINs had the doors assembled while on the car, while panels were attached. This caused alignment issues with the panels (underbody warping under unsupported weight and all), so later VINs had doors attached last; panels are perfectly aligned on these. May be related to door welding.
- Windows were glued to the stainless on early VINs. Later VINs had additional weatherstripping between the glass and the stainless to hide this glue.
- Production error in earlier VINs led to symmetrical holes in the underbody's trunk area (for the windshield washer fluid cap). Passenger-side drill jig was "deleted" once problem was spotted; early VINs have rubber plugs in these holes.
- Part of the rear suspension that is welded to the frame has additional rivets on the earliest VINs (such as mine). Picture attached:
12149
(Seen dead center: yellowish part with nine small brown protrusions, where black bar on right meets frame.)
- Several 500 series VINs don't have VIN plates on driver's side door jamb. Picture attached:
12150
(Also pictured is my ash tray, which looks identical to the one I saw on VIN 10516 back in '08. Previous/original owner was a nonsmoker, so I doubt it's been replaced.)

Iznodmad
07-29-2012, 12:50 PM
Carpets, dead pedal, external door locks, coolant hose routing of engine, wiring harness routing, VIN plates (color and/or stamping, also apperance of radio interference plate). Wheels have already been mentioned, most know about the color, but there is also different castings (thick vs thin).

There are an amazing number of differences in the cars when you really start to think about it. This is one of my favorite subjects when it comes to discussing DeLorean history and lore.

Jonathan
07-29-2012, 01:13 PM
There are an amazing number of differences in the cars when you really start to think about it. This is one of my favorite subjects when it comes to discussing DeLorean history and lore.

Definitely! If I'm chatting with someone actually interested in the car, this is the best way to turn the conversation away from BTTF and cocaine jokes. I often mention the two options you could have chosen (transmission and colour of the leather), then mention a couple of the dealer installed options (like floor mats, wide stripes, luggage rack), and then a few of the subtle ones like mentioned here (the hood styles for sure, antenna location, light/dark wheels). It's usually a pretty good litmus test for seeing if the guy you're talking to actually wants to learn about the car, or just wants to keep walking cause he would have rather just kept making the "bingo" jokes.

Shep
07-29-2012, 03:43 PM
coolant hose routing of engine, wiring harness routing, VIN plates (color and/or [...] apperance of radio interference plate).Could you clarify these four? I was not aware of any of these.


There are an amazing number of differences in the cars when you really start to think about it. This is one of my favorite subjects when it comes to discussing DeLorean history and lore.To me, the most fascinating part is that there's just so many changes, I'm still learning about them years after I first became a fanatic. I have to agree, it's my favorite subject of DMC history too. Some of them are so subtle, and others are quite noticeable. Some have exact VIN ranges, others (HVAC panels) are very haphazard. Truly a unique part about DeLoreans.

----

By the way, I have transcribed all the VIN changes from the concours manual posted prior to a .txt file for easy reference. I'm not quite sure how spot-on those VIN ranges are (door locks had transition VINs of 4187/4188 in one place, 4199/4200 in another), but at least you don't have to search through everything.

[Link (https://dl.dropbox.com/u/78099959/DMCTalk/Production%20Changes.txt)]

I may later convert over to an Excel file, but I will post a link to it in that .txt file if/when I do.

Iznodmad
07-29-2012, 04:28 PM
1219912200

These images show the different coolant hose routing and wiring bundle differences. Early Cars will have black windshield plates for the VIN, vs grey later on. For the door jamb VIN plates, early on the month/year was stamped from the top rather than pressed from the bottom and build date and VIN are closer together on the plate. See pics on txdmc.org for sample pics. Cars built right around VIN 10001 will have a plate right above the door VIN plate that says it complies with radio interference regulations. I think there are at least a couple that Shannon has on txdmc.org as well.

Iznodmad
07-29-2012, 04:33 PM
I just thought of other differences with regards to the airbox itself. Earlier cars have a small DMC emblem vs larger fitted on the airbox. Also, a sticker was fitted to later cars about the filter element like the photo above. For the coolant hose difference just look at the drivers side of engine along side of intake. For the wirin harness look at passenger side valve cover (late 83 spec.)

Shep
07-29-2012, 05:17 PM
1219912200

These images show the different coolant hose routing and wiring bundle differences. Early Cars will have black windshield plates for the VIN, vs grey later on. For the door jamb VIN plates, early on the month/year was stamped from the top rather than pressed from the bottom and build date and VIN are closer together on the plate. See pics on txdmc.org for sample pics. Cars built right around VIN 10001 will have a plate right above the door VIN plate that says it complies with radio interference regulations. I think there are at least a couple that Shannon has on txdmc.org as well.Thanks a bunch! Looks like the coolant hose on the left side was replaced on 559 prior to purchase. I have the black rubber hose directing towards the rear fascia on the left, but the gray metal pipe with the rubber coupler fitting on the right. Never noticed that before.

I can't tell where the engine wiring harness is in those pictures, and I couldn't find it in pictures of my engine bay. :headscratch: I can't seem to find any wires at all, really. What general region of the engine can I find these wires? I'm probably looking at the wrong spot...

Iznodmad
07-29-2012, 05:39 PM
12202

See how the wires come from the stove pipe area across the passenger side valve cover and over the W pipe in this image ( with a couple of whitish connectors)? They are not present in the other pic above on the engine with the air filter box because it is not there. It is a different wiring harness all together. Much cleaner look IMO.

Shep
07-29-2012, 08:48 PM
12202

See how the wires come from the stove pipe area across the passenger side valve cover and over the W pipe in this image ( with a couple of whitish connectors)? They are not present in the other pic above on the engine with the air filter box because it is not there. It is a different wiring harness all together. Much cleaner look IMO.Thanks! I see it now. Mine has that wiring, but the connectors are a dark graphite color. Interesting... perhaps another difference?

cpistocco
04-01-2016, 12:05 AM
One more difference (maybe).... Some cars have doors that have different graining in the ss (compared to fenders and quarters). Other cars have uniform graining throughout.

jamesrguk
04-03-2016, 04:07 AM
Also there were two different wheel castings as well as the colour choice of silver/grey.

I doubt many people notice.

41260

41261

J

Jonathan
04-03-2016, 09:03 AM
Realizing the OP asked this in 2012.

Maybe this thread here could be stickied? It seems to be the most thorough one.

http://dmctalk.org/showthread.php?9077-Production-Changes-by-VIN&highlight=chronology

David T
04-03-2016, 02:40 PM
A good place to start is the Millenium Concours Manual. It lists vin breakpoints for a lot of the production changes. The Service Bulletins also contain the vin breakpoints (which is where the concours manual got many of them anyway). There is not a lot of "official" documentation on this stuff. Over time DMCH may discover more as they go through the mountain of stuff they have.