PDA

View Full Version : Thermotime switch question



Chris Burns
07-31-2012, 02:37 AM
How often do you have to replace a thermotime switch on a Delorean? Just curious.

dmc6960
07-31-2012, 09:43 AM
Very seldom, sometimes never. Its a part with a slightly more complicated function then other sensors/switches. Its also very easily tested and easily bypassed if failed ("plug-swap" when starting) and easy to replace. You dont need to worry about it unless its hard to start. Hard to start cold, make sure its grounding the CSV. Hard to start when hot, make sure its NOT grounding the CSV.

DMCMW Dave
07-31-2012, 10:38 AM
They are most often replaced after ham-fisted mechanics break the outer shell, lose the plug orientation, and then hook it up backwards, which burns it out.

I don't ever recall replacing one that didn't show physical damage.

DMCVegas
07-31-2012, 10:57 PM
They are most often replaced after ham-fisted mechanics break the outer shell, lose the plug orientation, and then hook it up backwards, which burns it out.

I don't ever recall replacing one that didn't show physical damage.

http://fi.somethingawful.com/images/smilies/emot-buttertroll.gif