Log in

View Full Version : Wheeler Dealers - Renault Alpine



OverlandMan
10-19-2012, 12:24 PM
Anyone catch the new episode this week? They did a Renault Alpine A310 (not sure what year). They were made from 1971 to 1984 according to Wikipedia. Regardless it has the same 2.7L PRV engine as our DeLoreans. The fuel is delivered through dual carbs. The front carb is a single barrel and fuels the front two pistons while the rear is a double-barrel and fuels the other 4 cylinders. Interesting setup.

They supposedly put out approx 170 HP with the original setup. In the episode, Edd installs an after-market custom intake manifold with a 4 barrell Holley carb on top. This mod gets them around another 20 HP. Combine that with the existing after-market exhaust and the car was putting out around 200 HP. The car weighed 2200 lbs (500-600 lbs less than our DeLoreans).

I thought it was pretty cool.

Evildeli
10-19-2012, 12:33 PM
I thought they said it was something like a '76 model.

DMCVegas
10-19-2012, 03:35 PM
No, that is not the same engine configuration at all.

First difference is the displacement. B27F engine is 2.7 liters, B28F is 2.8L.

Second are the heads. We have larger ports for better camshaft lubrication.

Final item is the compression ratios with the 2.7 being higher.

The exhaust is also totally different with the a sense of the restrictive 3-way converter. The Gold Portfolio had an article that with the car delete and different ignition 2.8 could hit about 30 extra horses or so.

Addin HP is a multi-pronged approach.

OverlandMan
10-19-2012, 03:54 PM
No, that is not the same engine configuration at all.

First difference is the displacement. B27F engine is 2.7 liters, B28F is 2.8L.

Second are the heads. We have larger ports for better camshaft lubrication.

Final item is the compression ratios with the 2.7 being higher.

The exhaust is also totally different with the a sense of the restrictive 3-way converter. The Gold Portfolio had an article that with the car delete and different ignition 2.8 could hit about 30 extra horses or so.

Addin HP is a multi-pronged approach.

Did you see the episode? Mike Brewer makes reference to the DeLorean in the first 5 mins when discussing the Alpine's background. Today I got on Wikipedia (you can believe everything on the internet right? :biggrin: ) and looked up the car. Here's the URL: http://en.wikipedia.org/wiki/Renault_Alpine_A310. It lists 2 engines on the right, the second being a 2.7L V6 PRV. If you go to the PRV wiki article here: http://en.wikipedia.org/wiki/PRV_engine and scroll down 1/2 way you'll see the ZMJ-159: Fuel-injected version used in the DeLorean DMC-12.

Now I do see the 1/10 difference in displacement ( 2.7 vs 2.8 ) you mention. And I wouldn't argue the other differences you brought up but is the PRV block itself essentially the same? I know when I was watching the show that I noticed how similar the valve covers looked.

Finally, on the show they mentioned the car they purchased already had an after-market exhaust upgrade. They did not expand on that at all other than to say when coupled with their carb upgrade, the exhaust performance would be realized more so than before.

It was a cool looking car. I really liked it.

pezzonovante88
10-19-2012, 07:53 PM
I saw an Alpine yesterday. There's one that lives somewhere near me as I've seen it driving around several times.

DMCVegas
10-22-2012, 11:03 AM
Did you see the episode? Mike Brewer makes reference to the DeLorean in the first 5 mins when discussing the Alpine's background. Today I got on Wikipedia (you can believe everything on the internet right? :biggrin: ) and looked up the car. Here's the URL: http://en.wikipedia.org/wiki/Renault_Alpine_A310. It lists 2 engines on the right, the second being a 2.7L V6 PRV. If you go to the PRV wiki article here: http://en.wikipedia.org/wiki/PRV_engine and scroll down 1/2 way you'll see the ZMJ-159: Fuel-injected version used in the DeLorean DMC-12.

Now I do see the 1/10 difference in displacement ( 2.7 vs 2.8 ) you mention. And I wouldn't argue the other differences you brought up but is the PRV block itself essentially the same? I know when I was watching the show that I noticed how similar the valve covers looked.

Finally, on the show they mentioned the car they purchased already had an after-market exhaust upgrade. They did not expand on that at all other than to say when coupled with their carb upgrade, the exhaust performance would be realized more so than before.

It was a cool looking car. I really liked it.

The PRV is a modular engine design, yes, in the sense that the initial block will accept certain parts from other generational engines in the series. But with the different engines that came out, the different configurations are certainly not that same.

As stated, the 2.7 had worse lubrication than the 2.8. This was due to narrower oil passages that were more sensitive to neglect. If you didn't do your regularly scheduled oil changes, the passages would clog and stop lubrication to the cams. As a result the cams would get chewed up and the PRV wound up with it's unjust reputation for eating cams.

Again there are other differences as well when it comes to the internals that span the PRV's history from lower capacity heads, connecting rods that change the stroke, different diameter sleeves and pistons, and including but not limited to split-journal crank shafts on the 3.0s to achieve even-fire as things that have changed over the years. And that's just the internals. Moving on from there you've got everything from your ignition systems including dual-counterweight distributors, as well as intake and exhaust manifolds.

It may be the same engine in the sense that you could build the same configuration if you had the parts, but those individual configurations will prohibit the interchanging of internal and external components because not all are compatible with one another. You can't just bolt 2.8 heads to a 3.0 because the crank is a different configuration. And you can't just drop a 3.0 into a DeLorean because you can't bolt up K-Jetronic let alone Carbs because there is no way to adjust the spark with the later style distributor. Exhaust systems are another thing as well. An Alpine exhaust is NOT going to work in a DeLorean, just as a Volvo will not. Exhaust is dictated by the vehicle it is installed in. If you're creative and a good fabricator, there are some ways to bend a few of these rules such as EFI conversions, but it tends to be beyond the average shadetree's skill level.

OverlandMan
10-22-2012, 11:21 AM
The PRV is a modular engine design, yes, in the sense that the initial block will accept certain parts from other generational engines in the series. But with the different engines that came out, the different configurations are certainly not that same.

As stated, the 2.7 had worse lubrication than the 2.8. This was due to narrower oil passages that were more sensitive to neglect. If you didn't do your regularly scheduled oil changes, the passages would clog and stop lubrication to the cams. As a result the cams would get chewed up and the PRV wound up with it's unjust reputation for eating cams.

Again there are other differences as well when it comes to the internals that span the PRV's history from lower capacity heads, connecting rods that change the stroke, different diameter sleeves and pistons, and including but not limited to split-journal crank shafts on the 3.0s to achieve even-fire as things that have changed over the years. And that's just the internals. Moving on from there you've got everything from your ignition systems including dual-counterweight distributors, as well as intake and exhaust manifolds.

It may be the same engine in the sense that you could build the same configuration if you had the parts, but those individual configurations will prohibit the interchanging of internal and external components because not all are compatible with one another. You can't just bolt 2.8 heads to a 3.0 because the crank is a different configuration. And you can't just drop a 3.0 into a DeLorean because you can't bolt up K-Jetronic let alone Carbs because there is no way to adjust the spark with the later style distributor. Exhaust systems are another thing as well. An Alpine exhaust is NOT going to work in a DeLorean, just as a Volvo will not. Exhaust is dictated by the vehicle it is installed in. If you're creative and a good fabricator, there are some ways to bend a few of these rules such as EFI conversions, but it tends to be beyond the average shadetree's skill level.

Wow - thanks for the clarification and all those details.

I was impressed with the length of time the "PRV" was manufactured and sold (in various configurations like you detailed above) --> 1974 to 1998 or 24 years.