Dangermouse
11-14-2012, 06:44 PM
A while ago we were talking about methods of sealing the wiper washer bottle and I came across Plasti-Dip, a rubberized spray-on coating. Reading the website got me interested in other things this product could do, in particular their claim that you could easily peel it off, and I wondered if you could use it to spray on our stainless panels for use as some sort of temporary graphics (let me say at this point that I am not actually sure when I would use this , but I approached it as more of a proof of concept.)
I bought a 12oz spray can at Home Depot for about $6. They only stocked it in black, but other colors are available. Black (and the $6 cost) was fine for my experimentation
I first tried it on a piece of steel conduit and it provided a nice grippy texture. Would be great for the neighborhood vigilante in the family. :shock:
Then I tried it on some scrap flat galvanized steel, just spraying a graffiti style letter. With a bit of picking with my fingernail I was able to peel most of it off after it had dried, but it was hard to get started. A sharp edge was what was needed, such as a stencil, rather than just free-form spraying.
As you can see, I wasn’t jumping right in to spraying it on the car :umm: . And when I finally got the courage to try it, I started with a tiny spot behind the rear wheel (just in case). Then on to the main test.
So, I cut out a stencil of my VIN in some basic copy-paper, as well as some test arrows that I could use for demonstration. Taped it on the car and voila:
http://dmctalk.org/attachment.php?attachmentid=14853&d=1352932397
http://dmctalk.org/attachment.php?attachmentid=14854&d=1352932398
I have had those on the car for 5 or 6 weeks now in temps between 35-80F. It’s been washed and rained on, and seems pretty well attached. I just hoped it would come off.
Close-up you can see that the edges aren’t as sharp as I would have liked, due to the concave bend in the fender resulting in a gap under the stencil.
A construction paper stencil on the hood would probably give the sharpest edge (but there was no way I was starting experimentation there). The arrows were little better. And I could have tidied them up with a fingernail, or soft wooden stick.
http://dmctalk.org/attachment.php?attachmentid=14859&d=1352932444
It took a couple of picks with my fingernail, but soon got one of the arrows to peel off, leaving a faint “splatter” outline.
http://dmctalk.org/attachment.php?attachmentid=14856&d=1352932409
http://dmctalk.org/attachment.php?attachmentid=14857&d=1352932409
http://dmctalk.org/attachment.php?attachmentid=14858&d=1352932410
Most of this faint outline was easily rubbed off. Of course it is now all fingerprints, so a good wash and maybe a touch with a blending pad would remove the last traces.
Now, it's up to you creative types to do something with it.........
I bought a 12oz spray can at Home Depot for about $6. They only stocked it in black, but other colors are available. Black (and the $6 cost) was fine for my experimentation
I first tried it on a piece of steel conduit and it provided a nice grippy texture. Would be great for the neighborhood vigilante in the family. :shock:
Then I tried it on some scrap flat galvanized steel, just spraying a graffiti style letter. With a bit of picking with my fingernail I was able to peel most of it off after it had dried, but it was hard to get started. A sharp edge was what was needed, such as a stencil, rather than just free-form spraying.
As you can see, I wasn’t jumping right in to spraying it on the car :umm: . And when I finally got the courage to try it, I started with a tiny spot behind the rear wheel (just in case). Then on to the main test.
So, I cut out a stencil of my VIN in some basic copy-paper, as well as some test arrows that I could use for demonstration. Taped it on the car and voila:
http://dmctalk.org/attachment.php?attachmentid=14853&d=1352932397
http://dmctalk.org/attachment.php?attachmentid=14854&d=1352932398
I have had those on the car for 5 or 6 weeks now in temps between 35-80F. It’s been washed and rained on, and seems pretty well attached. I just hoped it would come off.
Close-up you can see that the edges aren’t as sharp as I would have liked, due to the concave bend in the fender resulting in a gap under the stencil.
A construction paper stencil on the hood would probably give the sharpest edge (but there was no way I was starting experimentation there). The arrows were little better. And I could have tidied them up with a fingernail, or soft wooden stick.
http://dmctalk.org/attachment.php?attachmentid=14859&d=1352932444
It took a couple of picks with my fingernail, but soon got one of the arrows to peel off, leaving a faint “splatter” outline.
http://dmctalk.org/attachment.php?attachmentid=14856&d=1352932409
http://dmctalk.org/attachment.php?attachmentid=14857&d=1352932409
http://dmctalk.org/attachment.php?attachmentid=14858&d=1352932410
Most of this faint outline was easily rubbed off. Of course it is now all fingerprints, so a good wash and maybe a touch with a blending pad would remove the last traces.
Now, it's up to you creative types to do something with it.........