View Full Version : Anyone know anything about Porsche 944s?
Kenny_Z
01-02-2013, 01:16 AM
My brother found one locally and has fallen in love with a red 1985 Porsche 944s. I told him I'd check it out tomorrow. The current owner is tired of cars and wants out of the game. The car's been stored for the passed 8 years but the storage company is shutting down in 2 days so he has to get the car out. He wants to unload it for less than 2 grand. The clutch and timing chain are new (as of 8 years ago) but the car won't start without starting fluid or a shot of gas. I don't know if it will stay running afterwards. It has about 70k miles on it. It also has a new set of tires put on a couple of weeks ago.
From the craigslist images the paint looks amazing but we all know that pictures can be deceiving. After all, Red's paint looks half decent in pictures but in person it's a sunburnt mess.
Just going by what I've learned about the car and the owner I think this guy thought he'd finally be forced into using his midlife crisis car by the storage unit shut down but when it wouldn't start it pissed him off and he wants it gone. I think the issue may be a faulty fuel regulator which is a 70 dollar part and a thirty minute fix. Does anyone know of anything else I should look for and common spots for rust and rot?
Dangermouse
01-02-2013, 01:22 AM
There was a thread on here last month about 944s, I think in DCF sub forum. You may want to check it out
Mike C.
01-02-2013, 09:04 AM
Here you go:
http://dmctalk.org/showthread.php?5372-Somebody-please-talk-me-out-of-buying-another-car-%28non-D%29-a&highlight=porsche
Kenny_Z
01-02-2013, 03:34 PM
Thanks guys. I read through the thread and went to look the car over. The seller was a grade A ass and was rushing me into just giving him the money and taking the car. Any question I asked was answered with "i'm a millionare, i don't need your money." The starter solenoid was hanging by a wire, the clear was flaking, the sunroof was siliconed shut, and he didn't want to let me hear her turnover. There were far too many red flags. I think the guy is hoping some sap comes along with stars in his eyes over it being a Porsche.
The only thing that made me smile was that I took Red. Mister millionare asked me if I'd sell her and of course the answer was no. I wouldn't sell him my Delorean for any amount of money. I see why he was trying to hide a black eye. I was close to giving him another one.
Mike C.
01-02-2013, 04:23 PM
I'd have said "You're a millionaire and you're bragging about a 944? LOL"
Jimmyvonviggle
01-02-2013, 04:28 PM
I'm surprised he didn't suggest an even swap for red.
vwdmc16
01-02-2013, 04:55 PM
944s are a nightmare to work on and stupid expensive in places to service. If you want to torture yourself like that, get a 928 instead, you get twice the engine and a prettier chassis. This one has been sitting and sounds rough, stay away.NO
Timebender
01-02-2013, 06:52 PM
So has anyone put a 928 engine in a D or can it even be done - or is it worth the work/hassle?
opethmike
01-02-2013, 06:54 PM
944s are a nightmare to work on and stupid expensive in places to service. If you want to torture yourself like that, get a 928 instead, you get twice the engine and a prettier chassis. This one has been sitting and sounds rough, stay away.NO
Just out of morbid curiosity, what makes them nightmares to work on? Never worked on one myself, so that is why I ask.
Kenny_Z
01-02-2013, 08:09 PM
I'm surprised he didn't suggest an even swap for red.
I would have laughed in his face.
I just spoke to my brother. He said the seller called him to say "I" was the reason he wouldn't be selling him this "perfect" car. I wasted his time and some other nonsense. Pj gave him a few choice words about trusting me more than some random person and hung up.
pezzonovante88
01-02-2013, 10:13 PM
If he's got so much money and doesn't "need" yours, why is he wasting his time trying to personally sell a $2000 car? What a tool.
vwdmc16
01-02-2013, 10:23 PM
So has anyone put a 928 engine in a D or can it even be done - or is it worth the work/hassle?
I mocked a M28 ( 4.5L 16v) in my car when I had the engine out for frame work. The cam towers which arent on would be pretty close to the frame rails but would clear, and the height of the intake would not be an issue, also the oil pan is the right shape to clear the frame. The largest issue would be the length at the crank. 928s have long water pumps and so many belts the crank pulley would probably touch the urethane of the fascia even if you pushed the transmission forward 2-3" like others have for swaps. But if you are doing all the work required to mount this engine and a transmission to it, then making a custom one off serpentine belt to drive the accessories ( you could do away with the power steering, and air pump) you might be able to squeeze it in there. So as a fabricator that has done intricate engine swaps and worked with 928s and Deloreans alot, I believe it could be done however the wonderful noise and decent power you would get is not worth the effort, price and 200+lb addition behind the rear axle. But just the same I really want to see someone do it :rock_on:
http://i31.photobucket.com/albums/c396/vwdmc16/dmc/CIMG2423.jpg
http://i31.photobucket.com/albums/c396/vwdmc16/dmc/CIMG2424.jpg
http://i31.photobucket.com/albums/c396/vwdmc16/dmc/CIMG2425.jpg
vwdmc16
01-02-2013, 10:49 PM
Just out of morbid curiosity, what makes them nightmares to work on? Never worked on one myself, so that is why I ask.
Anything in the driveline will take all day to do, to inspect of change the clutch, either the engine or trans has to come out and it not a small job, the trans is in the rear and has a long torque tube connecting it to the engine, that has to come out along with a bunch of other bits, many mechanics regard a clutch job on a 944 as the worst on any car produced.. After 28 years all the little bushings and hoses are dead, all those little parts add up quick and will cost more than the car is worth. Electrically the cars should be great, all the best Bosch had to offer in the 80's, but for some reason on these cars they have become finicky and get alot of intermittent issues. The use Bosch Ljet which is a solid system except the temp senders seem to go out on a regular basis, at least in my experience. Around that time ze Germans started making as much of the cooling system out of plastic as they could, works great until it's heat cycled 10,000 times or about 8-10 years and the plastic fails without warning, just another expensive thing to maintain and constantly keep an eye on.
And remember these cars were fully loaded so everything was power operated and complex, there ar alot of wires in these things, you can get random battery drains and intermittent module failures, again after 28yrs if they havent failed yet they will soon and leave you with a heavy bill. Its just a case of a car being built too complexly for its own good.
When the cars are working well and as they were designed there really isnt any car much better( IMO), they just feel so solid and precise however its a loosing game to keep them in that state when you consider the depreciation they've taken.
pezzonovante88
01-02-2013, 11:43 PM
There are a lot out there in the market, though, that are high mileage but have had major amounts of service performed and parts replaced - everything that is known to fail and anything that would fail in the 100,000 mile range (clutch, suspension&brake components, etc.). IMO 944s are fantastic cars, but it would probably be worth finding either a very low mileage one that's been owned by a long-time enthusiast owner/Porsche collector, or a high-mileage rebuilt car as mentioned above.
SamHill
01-03-2013, 09:28 AM
My brother bought the cleanest 944 I've ever seen last year. Came with verified maintenance records, was just spotless all the way around. It's the third one he's owned since 1990.
It worked great for a few months, now it's down for some reason. If you are a very talented mechanic, then take a chance on it. If not, then feel free to experience a new level in frustration. I have heard the same about 928s, if not moreso.
opethmike
01-03-2013, 11:20 AM
Anything in the driveline will take all day to do, to inspect of change the clutch, either the engine or trans has to come out and it not a small job, the trans is in the rear and has a long torque tube connecting it to the engine, that has to come out along with a bunch of other bits, many mechanics regard a clutch job on a 944 as the worst on any car produced.. After 28 years all the little bushings and hoses are dead, all those little parts add up quick and will cost more than the car is worth. Electrically the cars should be great, all the best Bosch had to offer in the 80's, but for some reason on these cars they have become finicky and get alot of intermittent issues. The use Bosch Ljet which is a solid system except the temp senders seem to go out on a regular basis, at least in my experience. Around that time ze Germans started making as much of the cooling system out of plastic as they could, works great until it's heat cycled 10,000 times or about 8-10 years and the plastic fails without warning, just another expensive thing to maintain and constantly keep an eye on.
And remember these cars were fully loaded so everything was power operated and complex, there ar alot of wires in these things, you can get random battery drains and intermittent module failures, again after 28yrs if they havent failed yet they will soon and leave you with a heavy bill. Its just a case of a car being built too complexly for its own good.
When the cars are working well and as they were designed there really isnt any car much better( IMO), they just feel so solid and precise however its a loosing game to keep them in that state when you consider the depreciation they've taken.
Ouch! Note to self - cross the 944 off the list of cars to own.
SamHill
01-03-2013, 02:12 PM
Whenever I see a 944 or 924 on the road I always think, "Man, that guy's got some skill. And patience." (The sad fact is that I've had much more fun with 'fake' Porsches --550 and the 356 Speedsters. They aren't terrible, depending on the initial build, because a few shops out there have been doing them for so long that they've gotten good at them. Nice little $15K go carts.)
pezzonovante88
01-03-2013, 03:10 PM
My brother bought the cleanest 944 I've ever seen last year. Came with verified maintenance records, was just spotless all the way around. It's the third one he's owned since 1990.
It worked great for a few months, now it's down for some reason. If you are a very talented mechanic, then take a chance on it. If not, then feel free to experience a new level in frustration. I have heard the same about 928s, if not moreso.
Yeah, my mechanic specializes in older exotic cars and he said 928s are basically the most expensive Porsches to maintain and service. I can't say I've heard too many bad things about 944s, though.
protodelorean
01-03-2013, 10:26 PM
I had an '89 944 for a few years. Great build quality. Very well balanced. No balls though. Seriously lacked acceleration. The 944 turbo though had the right power level, also a stronger tranny and brembo brakes.
One thing I did think was weird was the timing belts are called for replacement every 30K miles! And the tool the properly tension the belt is a $500 porsche tool. (I paid one of the local dealer mechanics to swing by my garage with the tool and tension the belt that I'd already installed.) It was an EASY $50 for him in like 10 minutes and saved me from buying a rediculous tool or worse taking it to a dealer.
I will own another Porsche, but it'll be a 911 or a Caymen.
DMCMW Dave
01-03-2013, 10:46 PM
Ouch! Note to self - cross the 944 off the list of cars to own.
Make sure the 928 is on that list too. The first time I ever looked under the hood of one, I swore that there is one car I'll never volunteer to work on. Much less own.
vwdmc16
01-03-2013, 11:14 PM
Yeah they really crammed alot of engine into the 928 engine bay, the early ones arent so bad but the late model cars are so much faster and prettier. Once stripped down to the essentials for racing, alot of room opens up and even the late model cars arent so bad to service (as long as you arent the one paying the bills). After stripping one down to become a budget race car( :lol:) I threw a old chevy 350 v8 in the engine bad just to see how it fits, I could fit 2 full engines between the firewall and radiator and had 8"s to spare on the sides to the frame rails. One day in the future when Im rich and have no other projects (yeah right) Id love to build a 928 powered by a basic and cheap american v8 and transmission and massively cut down wiring, the only Porsche bits would be the body, suspension and brakes.
Huge potenial in that engine bay
http://www.motorgeek.com/phpBB2/gallery2.php?g2_view=core.DownloadItem&g2_itemId=76256
Oh and here is a pic of the backside of the fuse board that uses something like 60 fuse and 35 relays, lets make all the wire grey!
http://forums.rennlist.com/rennforums/attachments/928-forum/638992d1339082302-black-widow-redux-dsc03125.jpg
Kenny_Z
01-04-2013, 09:07 AM
There's a local 928 Porsche that had a stroked 383 under the hood but that blew so he's building a new twin turbo. He wants to put down over a thousand horsepower at the rear wheels.
http://i1233.photobucket.com/albums/ff390/Muscleschnitzzle/IMAG0137.jpg
Yeah, the car is ugly but that'll be fixed after he's finished with his engine. I heard the 383 stroker in person and it was insane to hear that power from that car.
DMCVegas
01-04-2013, 05:52 PM
There's a local 928 Porsche that had a stroked 383 under the hood but that blew so he's building a new twin turbo. He wants to put down over a thousand horsepower at the rear wheels.
http://i1233.photobucket.com/albums/ff390/Muscleschnitzzle/IMAG0137.jpg
Yeah, the car is ugly but that'll be fixed after he's finished with his engine. I heard the 383 stroker in person and it was insane to hear that power from that car.
Hardly. I love the caution stripes! I love the purpose built look of vehicles.
Mark D
01-04-2013, 06:09 PM
Oh and here is a pic of the backside of the fuse board that uses something like 60 fuse and 35 relays, lets make all the wire grey!
http://forums.rennlist.com/rennforums/attachments/928-forum/638992d1339082302-black-widow-redux-dsc03125.jpg
OMFG.
I honestly thought this picture was a joke at first.
Absolutely crazy :screwy:
What does the service manual say when troubleshooting electrical problems? "Unplug the gray wire from the white relay block..." lol damn.
SamHill
01-04-2013, 06:16 PM
Started a thread on a 944 forum:
http://www.944online.com/cgi-bin/forum/forum.cgi?board=944Talk;action=display;num=1357335 563;start=0#5
Their advice sounds very familiar.
vwdmc16
01-04-2013, 10:31 PM
OMFG.
I honestly thought this picture was a joke at first.
Absolutely crazy :screwy:
What does the service manual say when troubleshooting electrical problems? "Unplug the gray wire from the white relay block..." lol damn.
Yeah nearly, everything is numbered so its not impossible. All those wires are pretty short and not too hard to trace, they also are well made and well protected so unless some water filled the passenger foot well and corroded all that, it should be very unlikely to need work. Still the front side is just excessive and the relay orders changed every few years.
http://i.ebayimg.com/00/s/MTIwMFgxNjAw/$(KGrHqF,!q0E-ZStHzMYBPvn3mn2BQ~~60_1.JPG?set_id=8800005007;
And remember that JZD contacted Porsche to possibly do the engineering for our cars? Imagine how our wiring would look.....
pezzonovante88
01-04-2013, 11:20 PM
And remember that JZD contacted Porsche to possibly do the engineering for our cars? Imagine how our wiring would look.....
Imagine how much more our cars would be worth!
Kenny_Z
01-04-2013, 11:37 PM
Hardly. I love the caution stripes! I love the purpose built look of vehicles.
Those are what I find ugly. I do like the flat paint and the yellow stripes up the side. It's the stickers, caution tape, and wing that I'd get rid of. However, he was going for a "rice-tastic" look to the outside. His words exactly. I like my vehicles a little more subtle...yes...I do drive a Delorean...that is bright red.
SamHill
01-11-2013, 11:48 AM
A poster on the 944 forum shared a picture of "Delorean Gray" caulk available at Home Depot.
http://www.944online.com/cgi-bin/forum/forum.cgi?board=944Talk;action=display;num=1357335 563;start=45#55
pezzonovante88
01-11-2013, 10:00 PM
A poster on the 944 forum shared a picture of "Delorean Gray" caulk available at Home Depot.
http://www.944online.com/cgi-bin/forum/forum.cgi?board=944Talk;action=display;num=1357335 563;start=45#55
That's so weird.
DeLorean03
01-12-2013, 01:23 AM
Kenny, if you have Casey's number call him. He bought, working on/restored and sold a 1984 Porsche 944. He even let me drive it (: ...
Kenny_Z
01-12-2013, 08:56 AM
Before I bought my D I purchased Delorean gray grout. It matched the tiles I installed but really it was the name.
My brother has (thankfully) moved away from wanting imports. I am trying to get him to focus on a 1965 Impala that is for sale on a local car forum. I can fix one of those in my sleep.
pezzonovante88
01-12-2013, 05:23 PM
Before I bought my D I purchased Delorean gray grout. It matched the tiles I installed but really it was the name.
My brother has (thankfully) moved away from wanting imports. I am trying to get him to focus on a 1965 Impala that is for sale on a local car forum. I can fix one of those in my sleep.
How 'bout a DeLorean?!
Kenny_Z
01-12-2013, 05:44 PM
Well, he's focusing on the below 3 grand market right now. I'd hate to see a 3 grand Delorean.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.