View Full Version : General Scanned suggested time and repair procedures manuals
THVGJP
01-16-2013, 02:38 PM
Forgive me If this was posted elsewhere, but does anybody have a scanned copy of the Suggested Time Manual and the Repair Procedures Manual. DMC sells only the empty binders and I am looking to add the manuals to the binders.
Thanks
Glen
Jonathan
01-16-2013, 02:56 PM
Service manual set here (Owners manual & binders complete with documents to go in them):
http://store.delorean.com/p-10303-service-manual-set.aspx
Service bulletin downloads here:
http://dmcnews.com/bulletins/
DeLorean Concours Manual (direct download, 25 MB PDF file):
http://delorean.hu/blog/DeLorean_Millennium_Concours_Handbook.pdf
As well as within the forum here itself, you can find many things in the resources section:
http://dmctalk.org/forumdisplay.php?5-Resources
Such as the Sticky'ed threads for Workshop Manual, Owners Manual, DMC-12 colour wiring diagram.
Also included in the resources section, but not Sticky'ed, are the wiring schematics which you may find useful:
http://dmctalk.org/showthread.php?40-All-Wiring-Schematics
Hope that answers your questions. Good luck.
A serchable repair manual (workshop) (http://dmctalk.org/showthread.php?2866-Searchable-Workshop-Technical-Bulletins-and-Volvo-Engine-Manuals&highlight=hybrid) and others can be found in the resources section (http://dmctalk.org/forumdisplay.php?5-Resources).
David T
01-16-2013, 10:12 PM
I don't think that's what he is asking about. I think he is looking for what is known as the "Flat Rate Book" in the trade. It lists how long it takes to do a certain procedure, like replace a water pump, and what DMC would reimburse a dealer for doing it under warranty work. I have never seen DMC's book but I have heard of it.
David Teitelbaum
Delorean Industries
01-16-2013, 10:22 PM
I don't think that's what he is asking about. I think he is looking for what is known as the "Flat Rate Book" in the trade. It lists how long it takes to do a certain procedure, like replace a water pump, and what DMC would reimburse a dealer for doing it under warranty work. I have never seen DMC's book but I have heard of it.
David Teitelbaum
Not available to the public.
Jonathan
01-16-2013, 11:35 PM
Not available to the public.
If a document exists from the original DMC in the 80s, whether it be "classified" or "top secret" in the sense that it tells you how many hours would be reimbursed for warranty work, how could it be unavailable to the public when that company doesn't exist anymore? I'm not aware of any company out there honoring an original warranty claim, so what difference would it make if we knew how many hours a certain job is supposed to take?
Personally, I get a kick out of how ridiculously long it takes to do simple things on the car because nothing is simple 30+ years later. Dave S. and I got a laugh out of how it took me 4-5 hours to change a light bulb on one of my door receptacles. Why? First you realize it's not just the bulb, then you need to take the interior door panels off to access the electrical connector, then you realize a mouse called that area home a decade ago, then when you're finished cleaning the mouse nest out, you go to repairing the wiring, then you go to put everything back together, look at your watch after 5 hours passed by, and finally see the bulb come on. As Dave joked with me, imagine trying to explain to some customer why he got a bill for 5 hours to fix a light bulb!
Unless a document pertains to the current DMC business and reflects confidential information about how they run their business, none of the original documents from the 80s likely need to be private (not counting any that have personal information of course, I'm talking about car related stuff).
David T
01-17-2013, 12:00 AM
The Workshop Manual was not meant for public distribution either. Or the Technical manual. I am sure the flat rate manual was not supposed to be available either but also none of the special tools or dealer signs or many of the other things that you can find on E-Bay! By now I am sure someone has it and is willing to sell it.
David Teitelbaum
Dangermouse
01-17-2013, 12:09 AM
Not available to the public.
That seems an odd comment. Why would anyone care? At this point is it not more of a historical document than anything else?
Does DPI have one? Or does DMCH keep them locked up?
Delorean Industries
01-17-2013, 12:21 AM
I have a self made one. Based on years of observation and experience.
I was given good advice once on this and it has held true. Do the job, how long did it take? That's what the book says.
TTait
01-17-2013, 02:33 AM
Another reason may be evident from a previous post in this thread...
We now have available digital copies of all kinds of manuals here. If a vendor takes the time to prep, duplicate and publish copies of a document they own - they charge for it. Thats great until someone who is not out to make a living off it publishes it free.
Rob Grady did not own the trademark on the technical manual that was scanned, but he did it to build his business, pay his rent, and insurance. Certainly even more work went into creating those lovely PDFs with multiple layers, etc. Its a great asset to the community that someone did that and its now available to us free, but I doubt that's what Rob had in mind when he sold the manuals in the first place. Rob is a great guy, but the bank that holds the mortgage on his house doesn't accept kudos Rob has earned - they want cash.
What, then, is the business case for making copies of a previously unpublished and rarely circulated document, if you have one? Not much now that you are likely to only sell a few copies before everyone just gets it free. It may be good for the community, but it doesn't do much for the bottom line of a business.
A few years back someone made up nice color wiring diagrams and was selling them online. I wanted to pay and get a digital file so I could print it out on E size stock, not 11 x 17. I promised to only print it once and not share the file, but understandably the seller no. Can't blame him.
On top of that - while Houston undoubtedly has such a document - why would they want to publish it? When a customer brings in a 30 year old car that has not been serviced, do they want him asking them why removing the exhaust manifold took more than twice as many hours as it says in the official book? The book was written to suggest repairs for these cars up until the mid 80's perhaps - not into the next century.
Every chef knows the food cost for every dish he sells, but he doesn't put the food cost on the menu so customers can argue price with him.
I appreciate having access to these documents, but its a double edged sword. If we want full service professional vendors we need to support them and remember that its not a hobby for them.
If its a slippery slope now, just wait a few more years - you will be able to take a door escutchion plate to kinkos and have a new one printed out on their 3D fabber for less than the price of a new one - then things will get very interesting. Maybe our grandkids will be able to have an entirely new Delorean beamed together in a Star Trek Replicator - watch for Ed B. to be spinning in his grave that day.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.