Log in

View Full Version : New Project



Pages : [1] 2

ccurzio
01-21-2013, 05:14 PM
I have an appointment tomorrow to go take a look at this:

http://i.imgur.com/Be7aUdL.jpg

I have every intention of turning it into this:

http://i.imgur.com/070dynY.jpg

Wish me luck!

DL4567
01-21-2013, 05:31 PM
http://img.consumersearch.com/files/cs/imagecache/blog-entry/images/blog/200122842-001.jpg

DMC5180
01-21-2013, 05:40 PM
Do you plan on shipping it off for the conversion? I'm pretty sure VideoBoB does them in addition to BTTF stuff.

Notifier
01-21-2013, 05:41 PM
Good luck!

OverlandMan
01-21-2013, 05:42 PM
What year model is it? Wasn't the original KITT an 82 Trans-Am w/ T-tops?

I like your goal here. Keep us posted.

Jimmyvonviggle
01-21-2013, 05:55 PM
We sure are a sick bunch of guys.:thumbup2:

DMC5180
01-21-2013, 06:02 PM
Link to Bobspropshop http://www.bobspropshop.com/kitt.html scroll down to he bottom to see his donor cars ready to be completed upon order.

thirdmanj
01-21-2013, 06:28 PM
Don't do it!! ;)

Michael
01-21-2013, 06:58 PM
Boy does that bring back memories. Back in the late 90's I was sporting a 87 Formula Firebird in the exact same color scheme. It was nothing short of flawless....now I got to find and post a pic of her. I think I paid 800.00 for it and had some paint work done and the rest I did myself. It did look nice.

Ok, didn't KITT have t-tops even in the pilot episode till the last episode? The rest of the panels are replaceable, but t tops are a bit more complex.

ccurzio
01-21-2013, 07:03 PM
The original KITT was indeed a 1982 T-Top Trans-Am, and the one I'm looking at is a 1986 Firebird with no T-Tops. I'm not too terribly worried about the roof (even though I'd prefer a t-top) since it will have the benefit of less maintenance and less worry for leaks. Realistically any 3rd gen firebird will work just fine.

I will NOT be shipping the car off for the conversion. I will be doing the work on my own.

Michael
01-21-2013, 07:07 PM
Well judging by the exhaust peeking through it at least has the 305 in it. Most likely carbed. I believe the HP rating for that engine was in the 170 area.

EDIT: Found them! Its a pic of a pic but its quick and gets the job done:
15943

I paid 800 for the car, It has a red door and fender so I had the enitre right side painted for like 350, then over the months fixed her up on my own. I had a freind cut the "Formula" decals for me and restripe the passenger side. I did the hood intake panel painting myself(original idea BTW) For some reason it had firebird wheels on it..I found a set of true Formula wheels and traded the crappy 15's for them plus 100 bcuks boot and refinished them myself. Also restored the interior and thanks to my new friend at the time(ebay) did the underhood area. It was a slick car. I had a lot of fun and good memories fixing that car up, and it really served me well. Everything worked and ran flawlessly. The guy I sold it to wrecked in in the first week :cry:

Dangermouse
01-22-2013, 04:16 PM
I wouldn't pay a dollar over $1950 for that ;)

ccurzio
01-22-2013, 06:33 PM
I wouldn't pay a dollar over $1950 for that ;)

Neither would (did) I. Got it for $1700.

Mr. Interweb detective.

Dangermouse
01-22-2013, 07:02 PM
Awesome. Good buy.

Another 2.8l V6 ?

Looking forward to seeing it and seeing what you will be Macon of it :)

ccurzio
01-22-2013, 10:15 PM
The bad:
- Needs some work, but I was expecting that. $1700 doesn't fetch you a prime and pristine example of GM engineering. Needs bushings and shocks and the like.
- Interior lights don't work, except at the shifter and inside the radio.
- Cruise Control likes to accelerate on its own.
- There's some kind of fuel delivery problem causing it to sputter if you give it lots of gas at once, but if you give it gradual gas it evens out.
- Idling likes to stall. Throttle body needs a good cleaning per the owner.
- Lots of minor cosmetic issues.

The good:
- ZERO RUST. The body alone is pretty much what I paid for the car.
- It runs solid. It made it home from Macon to Gainesville (144 miles) with no real issues.
- Both headlight motors work perfectly.
- New fuel pump (with a cool homebuilt access panel to get to it), new idle control valve, new-ish BFG tires, etc.
- One owner. I bought it from the woman who bought it new from the dealership, and her husband works on cars.
- Clean. The car definitely shows its age, but it's been taken care of.

OverlandMan
01-23-2013, 11:18 AM
Chunk some interior pics up when you get a chance.

ccurzio
01-23-2013, 01:08 PM
Have some photos.

http://i.imgur.com/paPJkVal.jpg

http://i.imgur.com/Vy1JRTMl.jpg

http://i.imgur.com/6JE6Tc8l.jpg

http://i.imgur.com/cXl0zXVl.jpg

http://i.imgur.com/PFU45sDl.jpg

Dangermouse
01-23-2013, 01:22 PM
I see from my detectiving that you have another 2.8L V6 pumping out a heady 135HP.

I don't know why, but I was expecting a carb. :jawdrop:

Love the carpet job in the trunk :)

Looks like a solid car.

ccurzio
01-23-2013, 02:23 PM
ANYONE WHO HAS A CARBURETOR IN THEIR CAR IS A MORON AND SHOULD NOT OWN AUTOMOBILES.

Also, the carpet job in the trunk is like that because of that white plate there. The PO made a handy little modification to replace the fuel pump assembly. To do that normally, you'd apparently have to drop the axle and the fuel tank. He instead chose to come in from above by cutting a very clean hole right there, and then installing an access panel. Pretty clever, and apparently GM started doing the same thing not long after.

As of a little while ago, I've already completed my first repair. I noticed during my test drive that the turn signals operated VEEERRRRRRY SLOOOOOOOOW. The PO said it was normal, but I knew that was dead wrong. Swapped out the flasher relay and it immediately started operating normally. (Tried to dig through the repair manual to find where the relay is installed but that didn't even help me find it. Had to track it down by listening and feeling.)

thirdmanj
01-23-2013, 02:44 PM
ANYONE WHO HAS A CARBURETOR IN THEIR CAR IS A MORON AND SHOULD NOT OWN AUTOMOBILES.

You know, if you're gonna do that, Bass Pro Shop has got these slick little electric motors that you can put on the front of your boat. It's much quieter that way. ;)

ccurzio
01-23-2013, 02:46 PM
http://i.imgur.com/xYnnmZC.png

OverlandMan
01-23-2013, 02:52 PM
http://i.imgur.com/xYnnmZC.png

Jesus that's creepy

Dangermouse
01-23-2013, 03:12 PM
Also, the carpet job in the trunk is like that because of that white plate there. The PO made a handy little modification to replace the fuel pump assembly.

I thought that was a sheet of paper :shock:


You know, if you're gonna do that, Bass Pro Shop has got these slick little electric motors that you can put on the front of your boat. It's much quieter that way. ;)

I have no idea what you did there. :8ball:

thirdmanj
01-23-2013, 03:13 PM
I have no idea what you did there. :8ball:

That's because you're an "avid indoorsman".

ccurzio
01-24-2013, 01:04 AM
What have you done to your Firebird today?


Replaced turn signal flasher relay.
Replaced wiper blades.
Cleaned throttle body and replaced air and fuel filters.
Replaced PCV valve, O2 sensor, EGR vacuum hose, alternator belt, power steering belt, and air conditioning belt.
Removed differential cover and drained gear oil, cleaned and ground cover, replaced cover and refilled with new gear oil.
Replaced front and rear sway bar end links and bushings as well as rear shocks.


Tomorrow will see the front struts get replaced and then an oil change.

DeMopar
01-24-2013, 02:45 AM
Very cool project! My older brother was huge into Knight Rider from '82 when the show started. He built a KITT replica in '83-'84 when the show was still on.

You are better off with an '86 than an earlier car as the 3rd gen cars got better as years went up. Also, IMHO you are better off w/o T-tops. No leaks! It can get pretty expensive getting them not to leak...

I believe I have a set of take off tail lights from my old '84 T/A. They have been stored indoors since 1990 and are in really nice shape as I recall. You may rather a set of crappy ones though, since you will need to drill into them to attach the tail light blackout panel. Anyway, PM me if you are interested.

Brian

ccurzio
01-24-2013, 08:37 AM
I believe I have a set of take off tail lights from my old '84 T/A. They have been stored indoors since 1990 and are in really nice shape as I recall.

Definitely interested, though depending on the trim level it might look exactly like the ones I already have. Can you take a pic?

Mike C.
01-24-2013, 03:53 PM
if ur doing a KITT, youre definitely going to want those 84 TA tail lamps. They are the correct ones underneath the black out panel.

All 3 of my 3rd Gen TAs had TTops.... and they ALL leaked like crazy.


Oddly enough, im looking for a GTA with TTops..... weird..

DeMopar
01-24-2013, 04:08 PM
Definitely interested, though depending on the trim level it might look exactly like the ones I already have. Can you take a pic?

Sure thing. I will round them up when I get home from work and take a pic.

ccurzio
01-24-2013, 08:13 PM
if ur doing a KITT, youre definitely going to want those 84 TA tail lamps. They are the correct ones underneath the black out panel.

Absolutely correct. I was planning to put some feelers out there for the proper tail lights as well as start looking at some junk yards. And I also plan on getting the single-piece blackout panel since the three-piece looks like crap.

Mike C.
01-24-2013, 10:53 PM
Absolutely correct. I was planning to put some feelers out there for the proper tail lights as well as start looking at some junk yards. And I also plan on getting the single-piece blackout panel since the three-piece looks like crap.

yes... definitely do the one piece. I had that on my 84ta. I cable rigged the trunk lock to the interior so I did NOT have to have a key hole on the outside. Kinda reminds me now of the engine cover pull on the D, cause I used a hood release pull from a junk yard car.

I've only had 3rd gen TA's, never firebird body trims, so i've never really wanted to do a full KITT conversion, so really enjoying seeing this thread. Good luck! Oh, rip that shitty motor out and put some real balls in there :) But, until you get her looking good, it's a good "move the car here and there" motor.

DMC02766
01-24-2013, 11:04 PM
If you are going to do it, there is a company that makes a lot of the parts for the conversion and they are spot on to the screen used parts:

http://www.markscustomkits.com/

The nose piece they make seems to look the best out of the ones you can get. Supposedly they have a mould from the one that was used on the show.

DMC02766
01-24-2013, 11:06 PM
Looks like Marks Custom kits has the one piece black out too for $80..

http://www.markscustomkits.com/trans-am-exterior.htm

DeMopar
01-24-2013, 11:23 PM
Sure thing. I will round them up when I get home from work and take a pic.

Gotta dig them out of the box. Will get the pic posted asap.

Mike C.
01-25-2013, 12:15 AM
I was at TA Creations in Miami a few months back and he had 2 knight rider cars in there, including one with a Mark's custom kitt's nose on there. It was a later nose, but the fit and finish was horrible. I def hope you go do the KITT building forums and find a really good one. I've seen a few KITT's with some saggy and seemingly elongated noses and it just looks....bad

ccurzio
01-25-2013, 09:43 AM
yes... definitely do the one piece. I had that on my 84ta. I cable rigged the trunk lock to the interior so I did NOT have to have a key hole on the outside. Kinda reminds me now of the engine cover pull on the D, cause I used a hood release pull from a junk yard car.

Shit... I hadn't even thought about the trunk release. Good catch there, man.


I've only had 3rd gen TA's, never firebird body trims, so i've never really wanted to do a full KITT conversion, so really enjoying seeing this thread. Good luck!

Thanks! :)


Oh, rip that shitty motor out and put some real balls in there :) But, until you get her looking good, it's a good "move the car here and there" motor.

God damn it, you're like the 15th person that's told me to do that. :(


If you are going to do it, there is a company that makes a lot of the parts for the conversion and they are spot on to the screen used parts:

Yep. Very familiar with that guy and his site. Thanks.

I was at TA Creations in Miami a few months back and he had 2 knight rider cars in there, including one with a Mark's custom kitt's nose on there. It was a later nose, but the fit and finish was horrible. I def hope you go do the KITT building forums and find a really good one. I've seen a few KITT's with some saggy and seemingly elongated noses and it just looks....bad

This, however, I was not aware of. And it's tremendously disappointing to hear since that's who I had planned on buying the nose from. :(

ccurzio
01-25-2013, 12:54 PM
Just got off the phone with my mom, who saw the posts about my car on Facebook.

"So when are you going to grow up?"

Wow.

videobob
01-26-2013, 08:16 AM
I have done a few of these, the 82 Firebird was my first car when I was 16 and I can tell you that these cars are some of the worst ever built.
They are just plain horrible, nothing ever works for long.
That is why that despite building hundreds of thousands of these, you can hardly find one anymore.
They all simply fell apart.
You are going to most likely have to replace the door hinges and pins, the headlight motors are made of a brittle metal that breaks easily
and the motors and relays rarely work.
You can almost never get the A/C to work without overheating the car, not that it matters because the KITT dash has no vent spaces in it.
Once converted, the interior will always smell like fiberglass resin at the sun bakes the dash.
The conversion steering wheel is deadly.
The gauges are difficult to calibrate and keep functioning.

Once you have faced all these realities and spent about $10K on the project, if you love it, really really love it.... you will enjoy it.
Sorry to be a Debbie downer, but I try to talk my clients out of their dream cars first, if after all the negatives are addressed and they still
want it do I know they really want it.

Good luck!!!

ccurzio
01-26-2013, 09:48 AM
I have done a few of these, the 82 Firebird was my first car when I was 16 and I can tell you that these cars are some of the worst ever built.
They are just plain horrible, nothing ever works for long.
That is why that despite building hundreds of thousands of these, you can hardly find one anymore.
They all simply fell apart.
You are going to most likely have to replace the door hinges and pins, the headlight motors are made of a brittle metal that breaks easily
and the motors and relays rarely work.
You can almost never get the A/C to work without overheating the car, not that it matters because the KITT dash has no vent spaces in it.
Once converted, the interior will always smell like fiberglass resin at the sun bakes the dash.
The conversion steering wheel is deadly.
The gauges are difficult to calibrate and keep functioning.

Once you have faced all these realities and spent about $10K on the project, if you love it, really really love it.... you will enjoy it.
Sorry to be a Debbie downer, but I try to talk my clients out of their dream cars first, if after all the negatives are addressed and they still
want it do I know they really want it.

Good luck!!!

Thanks for the note! I certainly appreciate the expert converter's point of view on something like this.

While the 82 was indeed known to have a lot that were pieces of shit, as has been mentioned they DID get better as the years went by. Mine is an 86, so here's hoping a lot of the gremlins have been killed. :)

I went into this project knowing that I didn't want to make a tremendous initial investment on the car and that whatever car I found would definitely need some work. This car isn't perfect by any means, but for the price I paid it's a damn good deal especially considering that it still runs well AND has absolutely no body/frame rust whatsoever. Between that, the work I'm doing to it and already have done to it - the restored handling/suspension is already amazing - along with some modern upgraded components, I'm hoping that I can get a decently reliable car out of the mix. And if something DOES go wrong, the Pontiac Firebird isn't some obscure automotive wonder that nobody's ever seen or knows how to work on, like say... a DeLorean. :D

Luckily, the headlight motors work great on my car (and of course who knows for how long), but I had already given some thought to the AC situation with the modified dash. Have you found any kind of workaround for that? AC is kind of a necessity for me, so even if I have to reroute the vents I'll do that.

I already have a super reliable daily driver in the form of an Audi A4 as well as a DeLorean. The KITT car will be just another project/distraction to have fun with every so often. Believe me, I definitely want it. :)

videobob
01-26-2013, 11:53 PM
With the A/C, I have found on most any old car, replace the radiator with a larger aluminum version and add an electric fan in FRONT of the condensor
to help with cooling, especially with parade work.
At least here in Texas it is a problem, maybe not where you are.

I had a creative idea for the internal A/C, since there are no vents built in the dash, you can route them just under the dash.
I was at Home Depot looking at the accessories for the Shop Vac's and they have a long skinny attachment used for sucking up water,
if it were mounted just under the dash along the bottom edge it would be a cool A/C vent.

Good luck!

ccurzio
01-27-2013, 09:34 AM
Holy balls, I hope none of you ever have to replace the oil pan on a 3rd gen F body. What a shitty job.

ccurzio
01-29-2013, 12:38 PM
Gotta dig them out of the box. Will get the pic posted asap.

Did you ever find these guys?

OverlandMan
01-29-2013, 06:28 PM
Maybe instead of a KITT conversion, you should opt for the evil twin KARR. Wasn't it essentially the same but with two-tone grey and black or something like that? Go evil. :devil:

16097



"Unlike KITT, whose primary directive is to protect human life, KARR was programmed for self-preservation, making him a ruthless and unpredictable threat. He does not appear as streetwise as KITT, being very naive and inexperienced and having a childlike perception of the world. This has occasionally allowed people to take advantage of his remarkable capabilities for their own gain; however, due to his ruthless nature he sometimes uses people's weaknesses and greed as a way to manipulate them for his own goals. Despite this, he does ultimately consider himself superior (always referring to KITT as "the inferior production line model") as well as unstoppable, and due to his programming the villains don't usually get very far. KARR demonstrates a complete lack of respect or loyalty, going so far as to on one occasion eject his passenger to reduce weight and increase its odds of escape."

If you went this route, you'd certainly confuse the average fans who don't remember/know what KARR was.

Here's another larger pic: 16098

ccurzio
01-29-2013, 07:30 PM
The two-tone gray/black was added later. When KARR was first introduced the only difference between him and KITT was that the scanner and voice modulator were yellow. (And the pattern on the voice modulator was reversed on the outer columns.)

Oh, and replace William Daniels with Peter Cullen.

Tillsy
01-29-2013, 09:25 PM
Interesting - I only remember KARR being pure black. Also remember KITT's interior voice light was solid but KARR's consisted of animated lines (KITT was changed soon after to have the animated lines).

DeMopar
01-29-2013, 09:59 PM
Did you ever find these guys?

I did! However, I suck at posting pics-lol. Can you PM me your e-mail address and I will shoot you a good pic with my phone.

Thanks,

Brian

DeMopar
01-29-2013, 11:11 PM
I did! However, I suck at posting pics-lol. Can you PM me your e-mail address and I will shoot you a good pic with my phone.

Thanks,

Brian


I sent them over a few minutes ago.

Mike C.
01-30-2013, 12:51 AM
Maybe instead of a KITT conversion, you should opt for the evil twin KARR. Wasn't it essentially the same but with two-tone grey and black or something like that? Go evil. :devil:

16097



If you went this route, you'd certainly confuse the average fans who don't remember/know what KARR was.

Here's another larger pic: 16098

There's a guy in TX who has both, and says most people don't know who KARR is. They see the amber flashing light and just call it KITT. Always liked KARR's two tone better. There was a dispute on whether or not KARR was black and silver or a deep dark BLUE and silver a while ago on a builder's board. In the end, there really never was an answer because it depended on who u asked and which still u looked at.

Frankly though, i'm a KARR fan.

ccurzio
01-30-2013, 01:53 PM
Just wanted to say, Brian is awesome. He's hooking me up with the first pieces of exterior conversion parts in the form of those trans-am tail lights. :)

My current project is focusing on converting the manual door locks and windows to power locks and windows. I'm buying actuators almost identical to those in Toby's kit. I've also started the process of transforming the interior from blue/gray to beige/tan.


Frankly though, i'm a KARR fan.

Then you'd probably like this t-shirt I made a while back. :)

http://i.imgur.com/ri4WRDV.jpg

Mike C.
01-30-2013, 04:18 PM
Just wanted to say, Brian is awesome. He's hooking me up with the first pieces of exterior conversion parts in the form of those trans-am tail lights. :)

My current project is focusing on converting the manual door locks and windows to power locks and windows. I'm buying actuators almost identical to those in Toby's kit. I've also started the process of transforming the interior from blue/gray to beige/tan.



Then you'd probably like this t-shirt I made a while back. :)

http://i.imgur.com/ri4WRDV.jpg

Niiiice!!!

ccurzio
01-30-2013, 06:45 PM
So after buying this car I started watching Knight Rider again. Partly to get some reference views of the car, but mostly because I love the show and it's been YEARS since I've watched it. I'm currently watching a halloween episode, and Michael is talking to a woman who hosted a halloween party the previous night trying to track down someone in a specific costume.

"Let's see... we had at least a dozen Boy Georges, a couple of breakdancing mummies, and one John DeLorean."

Annnnnnnnnnnnd we've come full circle.

thirdmanj
01-30-2013, 07:56 PM
So hilarious! Nerd thread that sh!t

videobob
02-01-2013, 05:14 AM
Have you noticed all the KNIGHT RIDER commercials with GE lately?
Pretty cool!!!

ccurzio
02-01-2013, 10:47 AM
I have seen them. Cool indeed, but man, William Daniels is gettin' old. He barely sounds like himself anymore.

ccurzio
02-01-2013, 07:55 PM
So if it's not already obvious, my car's interior is the absolute wrong color to be KITT. The car on the show had a beige/tan interior (known as Light Saddle or Doeskin) with black trim. My car's interior is in shit shape and is totally the wrong color.

http://i.imgur.com/jietodO.jpg

http://i.imgur.com/52kVYQx.jpg

http://i.imgur.com/jWTed2P.jpg

In an effort to prepare to correct this, I created a shopping cart from Hawk's Third Gen Parts containing each individual interior plastic trim piece in the correct color. The total came to around $250 which, admittedly is a bit pricy for a big pile of plastic parts. But you do what you have to, so I calculated the shipping costs. The website told me that shipping would be around $221 by itself, which is completely insane.

I called up Hawk's and told them what the website was telling me, and they said "Yeah, the calculator on the site is busted. Shipping would only be about $90 if we did it by freight", so I said "great!" and started ordering the parts over the phone.

Then they asked me the color I needed. "Doeskin."

"Yeah, that's not going to happen. The only thing we have in stock is either gray or red. Doeskin is very rare."

So that put a kibosh on that whole plan real quick. Downside is that I can't get the parts I need, but on the upside, I saved a shitload of money. Even moreso since I discovered SEM Color Coat. I took a test piece of trim from the car (visible in the first picture above):

http://i.imgur.com/xwYPM8h.jpg

I prepped it by cleaning it thoroughly, sanding with 400 grit sandpaper, wiping it down with a tack cloth, and then giving it one last wipedown with a clean towel. Then I sprayed some adhesion promoter on it before hitting it with the color coat, "Lt. Buckskin" color. Here's what it looked like shortly after I finished with it:

http://i.imgur.com/UddkmWR.jpg

It has dried since then, so it's not glossy anymore. I am ECSTATIC over the quality of this color coat shit. The surface of this thing looks like it came from the factory this color, and it's some seriously sturdy paint. I LOVE it.

As for the door panels, I already have brand new handle/lock trim (and I will be adding power locks to the doors), and I have brand new carpeted door panels on order. I will also be replacing the carpet throughout the entire car and recovering the seats with new upholstery. (If I were to go full-on accurate, I'd have to buy PMD seats. But I think I can do just fine with the ones I have, recovered for a more accurate color.)

I will also be using SEM Color Coat in black to repaint the door arm rests.

Jonathan
02-01-2013, 09:22 PM
Have you noticed all the KNIGHT RIDER commercials with GE lately?
Pretty cool!!!

Like this one, Bob?


https://www.youtube.com/watch?v=sQdIUMrUZBM

My guess would be there are no shortage of connections to NBC Universal with some of the TV or movie characters/robots you see in the commercial. I thought I read Knight Rider was Universal and Star Trek early on (1986) had a connection to NBC. I spotted Robby the Robot in there from Forbidden Planet, but I think it was MGM.

I worked for GE for about a decade and NBC was a huge piece of their business. Not as big say as aircraft engines or power systems, but part of the main 6 business units. I think a fair bit of that changed not long ago with selling 51% of NBC Universal to Comcast. Funny how not everyone realizes who owns the peacock symbol you are watching on NBC. Not much of a coincidence 30 Rock is the GE building.

DeMopar
02-02-2013, 12:08 AM
So if it's not already obvious, my car's interior is the absolute wrong color to be KITT. The car on the show had a beige/tan interior (known as Light Saddle or Doeskin) with black trim. My car's interior is in shit shape and is totally the wrong color.

http://i.imgur.com/jietodO.jpg

http://i.imgur.com/52kVYQx.jpg

http://i.imgur.com/jWTed2P.jpg

In an effort to prepare to correct this, I created a shopping cart from Hawk's Third Gen Parts containing each individual interior plastic trim piece in the correct color. The total came to around $250 which, admittedly is a bit pricy for a big pile of plastic parts. But you do what you have to, so I calculated the shipping costs. The website told me that shipping would be around $221 by itself, which is completely insane.

I called up Hawk's and told them what the website was telling me, and they said "Yeah, the calculator on the site is busted. Shipping would only be about $90 if we did it by freight", so I said "great!" and started ordering the parts over the phone.

Then they asked me the color I needed. "Doeskin."

"Yeah, that's not going to happen. The only thing we have in stock is either gray or red. Doeskin is very rare."

So that put a kibosh on that whole plan real quick. Downside is that I can't get the parts I need, but on the upside, I saved a shitload of money. Even moreso since I discovered SEM Color Coat. I took a test piece of trim from the car (visible in the first picture above):

http://i.imgur.com/xwYPM8h.jpg

I prepped it by cleaning it thoroughly, sanding with 400 grit sandpaper, wiping it down with a tack cloth, and then giving it one last wipedown with a clean towel. Then I sprayed some adhesion promoter on it before hitting it with the color coat, "Lt. Buckskin" color. Here's what it looked like shortly after I finished with it:

http://i.imgur.com/UddkmWR.jpg

It has dried since then, so it's not glossy anymore. I am ECSTATIC over the quality of this color coat shit. The surface of this thing looks like it came from the factory this color, and it's some seriously sturdy paint. I LOVE it.

As for the door panels, I already have brand new handle/lock trim (and I will be adding power locks to the doors), and I have brand new carpeted door panels on order. I will also be replacing the carpet throughout the entire car and recovering the seats with new upholstery. (If I were to go full-on accurate, I'd have to buy PMD seats. But I think I can do just fine with the ones I have, recovered for a more accurate color.)

I will also be using SEM Color Coat in black to repaint the door arm rests.


Man, you are going to town on this! Looking great! Yep, that SEM is some good stuff! BTW, did you get my note on the front cap?

Brian

Mike C.
02-02-2013, 05:19 PM
The best thing about your car? Someone cut a fuel pump access panel in the trunk. I have done that with EVERY one of my third gens because it saves TONS of time in the event u have an issue.

Hawkes is a great place to get third gen parts. With 3rd gens starting to hit their collectable stride, they are about to reap the benefit of hoarding all those parts.

DMC5180
02-02-2013, 05:56 PM
I've always wondered How many KITT's were built or destroyed during the Run of the series. Just about every episode had a TURBO BOOST Jump in it, I can't imagine the unibodies handling those landings very well.

I ran across article once that talked about the Duke of Hazzard (General LEE) 69 chargers. Over 250 (stunt cars were built and destroyed during the run if the show) and a ridiculous number Police cars.

Andy
02-02-2013, 06:49 PM
I've always wondered How many KITT's were built or destroyed during the Run of the series. Just about every episode had a TURBO BOOST Jump in it, I can't imagine the unibodies handling those landings very well.

I ran across article once that talked about the Duke of Hazzard (General LEE) 69 chargers. Over 250 (stunt cars were built and destroyed during the run if the show) and a ridiculous number Police cars.

It has been a while since I'v seen Knight Rider, but wasn't KITT just a shell ( or even a scalemodel ) when they did the jumping scenes? I remember in some shots it was clearly visible that the car had no chassis or drivetrain. In the Dukes of Hazzard they actually used real cars with every jump ....

Mike C.
02-02-2013, 07:00 PM
It has been a while since I'v seen Knight Rider, but wasn't KITT just a shell ( or even a scalemodel ) when they did the jumping scenes? I remember in some shots it was clearly visible that the car had no chassis or drivetrain. In the Dukes of Hazzard they actually used real cars with every jump ....

Oh the show was full of badly scaled models doing some crappy jumps.


The same goes for the later episodes of Dukes. Instead of using full size cars, they switched to goofy models so the General Lee could jump over buildings, rolling semi's, telephone poles, water towers, etc...

ccurzio
02-02-2013, 07:52 PM
The best thing about your car? Someone cut a fuel pump access panel in the trunk. I have done that with EVERY one of my third gens because it saves TONS of time in the event u have an issue.

YES. I am tremendously thankful for this hack. It's great.


I've always wondered How many KITT's were built or destroyed during the Run of the series.

Lots. The show was a huge boon for Pontiac - so much so that at one point, there was a train carrying a shitload of trans-am cars that had a major accident. Federal law prohibits the sale of any cars involved in such an accident (even if the cars themselves are undamaged) so rather than send them off to be crushed, Pontiac contacted the KR producers and said "Hey, you guys want some cars?" and gave them like 26 or 27 brand new Trans-Ams to use for the show.

There are a few scenes when they used scale models (like when KITT is riding on water or when it's close enough to an explosion to be hit or buried in dirt), but pretty much every turbo boost jump was done with a full-size car.

There's actually a shitload of outtakes that showed some REALLY bad landings that completely destroyed the car doing the jump. It was always a jump-cut at the last second so you never saw that in the show.

ccurzio
02-02-2013, 08:00 PM
I found some outtakes. This has a few of the really bad ones.


https://www.youtube.com/watch?v=xMK46ob-__s

ccurzio
02-04-2013, 04:35 PM
This was necessary.

http://i.imgur.com/NAufhMR.jpg

Mike C.
02-05-2013, 12:00 AM
I just rolled my 12 sided dice and you have officially gained +80 awesome points today.

Jonathan
02-05-2013, 01:20 AM
i just rolled my 12 sided dice and you have officially gained +80 awesome points today.

yahtzee!!!!!!!!! :)

ccurzio
02-06-2013, 12:51 PM
Welp, at this point there isn't much left to steal...

http://i.imgur.com/DX3EZUd.jpg

http://i.imgur.com/2siwnVl.jpg

Also today I'm going to fix the transmission and engine mounts.

Dangermouse
02-06-2013, 01:24 PM
Holy shit Chris, you're really getting to work on that :headbang:

ccurzio
02-06-2013, 02:34 PM
Holy shit Chris, you're really getting to work on that :headbang:

Yep. Thanks. Things are about to slow down a whole hell of a lot though.

With the interior out, this is the time to paint the car. Unfortunately I can't paint the car until I have the right exterior parts:

Front Nose
Trans-Am Rear Bumper
Correct Rear Hatch Window
Complete Weatherstripping

In addition to these parts not being at all cheap, there's a really long wait for the front bumper nose. And then there's the expense of getting a GOOD paint job done on the car.

On the upside, this gives me time to get the interior panels cleaned and painted and keep doing mechanical work on the car.

ccurzio
02-08-2013, 09:09 AM
http://i.imgur.com/UzB8LfA.jpg

http://i.imgur.com/fEEyG8t.jpg

Mike C.
02-08-2013, 09:29 AM
Which nose did u decide to go with?

ccurzio
02-08-2013, 09:57 AM
I've long planned to go with a Season 3 nose, but I don't know from which vendor yet.

I don't care for the Season 1/2 blinker blackouts and the Season 4 nose just looks too "flat" to me.

Kenny_Z
02-08-2013, 10:02 AM
This thread is awesome, makes me want a TransAm again. This is one of the few famous cars I'd make but exterior only. My neighbor had one of these trans-ams in his "junk pile" for the longest time but he always wanted too much money for the rusted out hulk. I think it was an 83 and he wanted upwards of 3 grand for it. This thing didn't run and needed at least both fenders patched or replaced. The quarters seemed good but that could have been a good/recent bondo job. It was a t-top so the floors were probably gone.

I may have overlooked it in the thread but what are you planning to do about the hood?

ccurzio
02-08-2013, 10:22 AM
This thread is awesome, makes me want a TransAm again. This is one of the few famous cars I'd make but exterior only. My neighbor had one of these trans-ams in his "junk pile" for the longest time but he always wanted too much money for the rusted out hulk. I think it was an 83 and he wanted upwards of 3 grand for it. This thing didn't run and needed at least both fenders patched or replaced. The quarters seemed good but that could have been a good/recent bondo job. It was a t-top so the floors were probably gone.

The reason I'm going balls-out with the KITT conversion is the same reason I'm keeping my DeLorean stock. The DeLorean itself is a rare car. The Firebird is not. KITT, however, is. And what good is a KITT that has the exterior done but whose interior is just a plain-jane Firebird? If someone sees KITT on the road they squeal and immediately want to see the dash. I ain't gonna disappoint them. :)

Plus, I'm going to be reprogramming the home monitoring/security system I designed for my house and adapt a mobile version for the car. So the computers will actually be functional. (And the car will have Faye's voice, not William Daniels. Faye is my system.)


I may have overlooked it in the thread but what are you planning to do about the hood?
There's a guy locally that is going to sell me the correct Trans Am cowl hood for $200.

Mike C.
02-08-2013, 01:21 PM
I've long planned to go with a Season 3 nose, but I don't know from which vendor yet.

I don't care for the Season 1/2 blinker blackouts and the Season 4 nose just looks too "flat" to me.

Good choice! Same exact thought on the 1, 2, and season 4 noses.

Im almost positive the car my friend and I saw that had the bad fit was a season 4 from Mark's.

Dangermouse
02-08-2013, 03:34 PM
(And the car will have Farrar's voice, not William Daniels. )


:tongue:

Jimmyvonviggle
02-13-2013, 12:24 PM
Here is a commercial that was just on tv.

http://m.youtube.com/watch?v=M6tAgUcuNN0

ccurzio
02-14-2013, 11:02 AM
Last week I got a quote on painting the car, and I also got a source for the front bumper nose. The nose is going to cost me around a grand, shipped from canada. Painting the car will be $3200 with a two-week turnaround using PPG paint/primer/clearcoat with a lifetime warranty against fading/peeling.

Today I purchased:

4 new rear hatch hinge bolts
Interior trim clips
New dome light cover
New headliner
New seat upholstery
New carpet

My wallet hurts.

DeMopar
02-14-2013, 10:42 PM
Two hundred bucks is a really good deal for a cowl hood in good shape, especially if you can pick up local. Have you picked up a blackout panel for the tail lights yet?

Mike C.
02-15-2013, 07:14 AM
Last week I got a quote on painting the car, and I also got a source for the front bumper nose. The nose is going to cost me around a grand, shipped from canada. Painting the car will be $3200 with a two-week turnaround using PPG paint/primer/clearcoat with a lifetime warranty against fading/peeling.

Today I purchased:

4 new rear hatch hinge bolts
Interior trim clips
New dome light cover
New headliner
New seat upholstery
New carpet

My wallet hurts.

Which nose vendor did u decide on?

I wouldn't use PPG. If you are going to make an accurate replica, I would just spend the extra $$ and spray the car with the molecular bonded shell versus 'normal' paint. Shit, man... get an eye for detail....

:cowboy:

ccurzio
02-15-2013, 08:26 AM
Two hundred bucks is a really good deal for a cowl hood in good shape, especially if you can pick up local. Have you picked up a blackout panel for the tail lights yet?

Not yet. I just finished buying everything for the actual interior restoration, and I'm looking at parts for the body. About to drop another $1200 on a set of turbocast rims. :(


Which nose vendor did u decide on?
A guy named Joe (KIDD) from one of the forums. Everyone had really good stuff to say about the quality of his work and he's listed as a "trusted vendor". I saw some pics of his stuff and I was impressed.


I wouldn't use PPG. If you are going to make an accurate replica, I would just spend the extra $$ and spray the car with the molecular bonded shell versus 'normal' paint. Shit, man... get an eye for detail....

I WOULD IF I COULD

Mike C.
02-15-2013, 03:41 PM
A guy named Joe (KIDD) from one of the forums. Everyone had really good stuff to say about the quality of his work and he's listed as a "trusted vendor". I saw some pics of his stuff and I was impressed.





Could u pm me the forum he's on and some links to his work? No reason.... none at all.....

MML
02-15-2013, 07:18 PM
Some inspiration for you Chris, I spotted this in my town a few months back.

http://i.imgur.com/5p0n9W7.jpg

http://i.imgur.com/Z3wAN9O.jpg

http://i.imgur.com/RYFw7DN.jpg

http://i.imgur.com/D30NynT.jpg

http://i.imgur.com/CIWWypV.jpg

ccurzio
02-15-2013, 08:00 PM
Stock dash.
Wrong steering wheel.
Wrong seats.
Wrong rims.
Season 4 nose.





Still better than mine. (For now!) Thanks for the pics. :)

ccurzio
02-19-2013, 05:35 PM
http://www.youtube.com/watch?v=gjNp2ZJxrQc

There's now overlap between the system that powers my house and the one that will power the car.

Mike C.
02-19-2013, 06:21 PM
I spy the JCWhitney 'scanner' light bar on that KITT...

SS Spoiler
02-19-2013, 06:52 PM
I used two of those J C Whitney strip lights on the back edge of my ss spoiler. Changed the wiring to eliminate the "mod" sequential light effects.

MML
02-19-2013, 08:38 PM
The guy that owns that KITT also owns an A-Team van, and his brother has a Starsky and Hutch Torino. I see a pattern emerging...

ccurzio
02-21-2013, 06:24 PM
http://i.imgur.com/LB2zuHF.jpg

Dangermouse
02-21-2013, 06:30 PM
I'll take "what the hell is that" for $100, Alex :o

ccurzio
02-21-2013, 06:39 PM
What is "Someone who has never watched Knight Rider". :P


https://www.youtube.com/watch?v=E83ee3SVMuY

Dangermouse
02-21-2013, 08:03 PM
That answer is incorrect.

The correct answer is "What is someone who hasn't studied every little detail of Knight Rider"

:p

That's david Hasselhoff in a Camaro, right?

ccurzio
02-21-2013, 08:26 PM
Fiero, not Camaro.

Some people.

ccurzio
02-21-2013, 08:36 PM
Also managed to score a set of "correct" rims:

http://i.imgur.com/AQTVVCH.jpg

Kenny_Z
02-22-2013, 12:25 AM
I'll take "what the hell is that" for $100, Alex :o

:hysterical:

Are you going to get the rims powdercoated gloss black?

ccurzio
02-22-2013, 08:09 AM
Nope. Powdercoated gray. I plan on getting the correct "bowling ball" hubcaps.

Mike C.
02-22-2013, 07:56 PM
http://i.imgur.com/LB2zuHF.jpg

I know what it is... i know what it is!


Kudos on the bowling ball and rims!

dustybarn
02-22-2013, 08:22 PM
Was this sighting in Buncrana? I was there on holiday a couple of years ago.

ccurzio
02-22-2013, 08:26 PM
I know what it is... i know what it is!


Kudos on the bowling ball and rims!

No bowling balls yet, but thanks. :)

Kenny_Z
02-22-2013, 09:54 PM
Aah, alright, I thought maybe we were looking at the back sides of the rims. It confused me.

MML
02-22-2013, 11:31 PM
Was this sighting in Buncrana? I was there on holiday a couple of years ago.

Haha yeah, well spotted!! What brought you to this little corner of the country?

DeMopar
02-23-2013, 11:36 AM
Also managed to score a set of "correct" rims:

http://i.imgur.com/AQTVVCH.jpg

Nice! Are they reproducing the bowling balls yet or do you need to find used?

ccurzio
02-23-2013, 11:46 AM
Nice! Are they reproducing the bowling balls yet or do you need to find used?

I'm going to need to go the reproduction route.

Tillsy
02-26-2013, 05:52 AM
If only this was real :rock_on:

http://originaldave77.files.wordpress.com/2012/11/kitt-car-stereo-deck-alpine-knight-rider-dave-delisle-davesgeekyideas.gif?w=914

http://davesgeekyideas.com/2012/11/16/k-i-t-t-car-stereo-deck/

ccurzio
02-26-2013, 08:17 AM
If only this was real :rock_on:

http://originaldave77.files.wordpress.com/2012/11/kitt-car-stereo-deck-alpine-knight-rider-dave-delisle-davesgeekyideas.gif?w=914

http://davesgeekyideas.com/2012/11/16/k-i-t-t-car-stereo-deck/

I could easily build that in a couple of days.

OverlandMan
02-26-2013, 11:07 AM
I could easily build that in a couple of days.

How much would you charge? Hell, I'd put that in my D. :)

ccurzio
02-26-2013, 11:14 AM
How much would you charge? Hell, I'd put that in my D. :)

Well in looking at it I think the ENTIRE thing is meant to fit in a DIN form factor. I was originally thinking the steering wheel on the left was meant to represent an actual steering wheel. In retrospect, that's stupid.

It also makes it a lot harder to do. But I've already managed the KITT voice box. See the video earlier in the thread. Everything else in that unit is cake. :)

OverlandMan
02-26-2013, 11:45 AM
Well in looking at it I think the ENTIRE thing is meant to fit in a DIN form factor. I was originally thinking the steering wheel on the left was meant to represent an actual steering wheel. In retrospect, that's stupid.

It also makes it a lot harder to do. But I've already managed the KITT voice box. See the video earlier in the thread. Everything else in that unit is cake. :)

Agreed, the steering wheel on the left is stupid UNLESS it's used to unlock/remove the faceplate? I'm Ron Burgundy?

Nicholas R
02-26-2013, 03:06 PM
Man I am so jealous of this project. I hope to follow in your footsteps some day with a KITT project.

Tillsy
02-26-2013, 05:06 PM
I think the steering wheel is meant to be an SD card slot - the slit looks like the right proportions

ccurzio
02-26-2013, 05:36 PM
Man I am so jealous of this project. I hope to follow in your footsteps some day with a KITT project.

Thanks man. I recommend it. :)

ccurzio
03-04-2013, 12:16 PM
http://i.imgur.com/NQrvBlf.jpg

Incidentally, the boxes under the nose contain my turbocast rims. :)

Mike C.
03-04-2013, 12:56 PM
http://i.imgur.com/NQrvBlf.jpg

Incidentally, the boxes under the nose contain my turbocast rims. :)


Wow, that got there REALLY quick!

ccurzio
03-04-2013, 12:58 PM
Yup. The guy was also good enough to pre-fab the mounting holes for me. All I have to do is bolt it up to the car and get it primed and painted. :)

DeMopar
03-04-2013, 11:41 PM
http://i.imgur.com/NQrvBlf.jpg

Incidentally, the boxes under the nose contain my turbocast rims. :)


Is that a season one nose? Do you put smoked plexiglass black-outs in the recesses where the turn signals used to go?


Love it!

Nicholas R
03-05-2013, 01:15 AM
Seriously, just for kicks, please prop this up in front of your DeLorean to give an idea of what it would look like on the front, lol. I really just have to know haha!

ccurzio
03-05-2013, 10:38 AM
Is that a season one nose? Do you put smoked plexiglass black-outs in the recesses where the turn signals used to go?


Love it!

Thanks. It's season 3, actually. No blackouts, but not totally flat on the sides like season 4.


Seriously, just for kicks, please prop this up in front of your DeLorean to give an idea of what it would look like on the front, lol. I really just have to know haha!

Haha, I'll try and do that this week. :)

ccurzio
03-14-2013, 06:21 PM
For you, Nicholas. Sorry it doesn't line up better but it's the best I could do with what I had. :)

http://i.imgur.com/7QmjNN4l.jpg

Nicholas R
03-15-2013, 03:21 AM
For you, Nicholas. Sorry it doesn't line up better but it's the best I could do with what I had. :)

http://i.imgur.com/7QmjNN4l.jpg

HAHA! I still think that's pretty awesome :D

ccurzio
03-27-2013, 08:29 PM
Removed the old manual mirrors and mounted up some power mirrors.

http://i.imgur.com/sGNJyNpl.jpg

DeMopar
03-27-2013, 09:42 PM
Removed the old manual mirrors and mounted up some power mirrors.

http://i.imgur.com/sGNJyNpl.jpg


Coming along nicely!

May I suggest shaving that fender antenna? I'm not sure that's "K.I.T.T. friendly". :)

dustybarn
03-27-2013, 10:09 PM
Haha yeah, well spotted!! What brought you to this little corner of the country?

My wife and I take our holiday in Ireland (or Scotland or Wales) every year, and rather than go to the usual tourist destinations, we go way off the beaten path at times. Last spring we were fortunate enough to get to perform in a theater festival in Ballymun, which is as close as we've ever gotten to being in a big city.

ccurzio
03-28-2013, 10:16 AM
May I suggest shaving that fender antenna? I'm not sure that's "K.I.T.T. friendly". :)

It's already on the list. But since I still do want a radio I've been researching alternatives in the meantime.

ccurzio
03-29-2013, 04:07 PM
The things you can accomplish when you don't have a girlfriend. :(

*sigh*

http://i.imgur.com/m44NIZ8l.jpg

Kenny_Z
03-29-2013, 04:43 PM
The car is looking awesome. The gaps look really good in that photo. I suggest a hidden antenna. I have one in my Mustang and it isn't bad. It's not as good as an external but if you've got decent signal from the local stations anyway you may not notice a difference. All I care about is the local rock station and I get it from that antenna within the range I drive the Mustang.

I can't say I empathize with the girlfriend issue. I have a hard enough time telling my friends and family to leave me alone. I don't need a clingy girlfriend added to the mix.

OverlandMan
03-29-2013, 04:44 PM
The things you can accomplish when you don't have a girlfriend. :(

*sigh*



:histerical1:

That made me laugh. Hood looks good man. You're making progress.

ccurzio
03-29-2013, 04:49 PM
The car is looking awesome. The gaps look really good in that photo.

Thanks. I actually went back out after the picture was taken and did some adjusting. The right side needed to be brought forward just a hair to even out the gap on the upper left. It's absolutely perfect now.


I suggest a hidden antenna.

Funny you mention this. I just bought myself a Tune Trapper hidden antenna this morning.

Farrar
03-29-2013, 06:14 PM
The things you can accomplish when you don't have a girlfriend. :(

*sigh*

Everything in life's a trade-off, isn't it?

thirdmanj
03-29-2013, 06:41 PM
Everything in life's a trade-off, isn't it?

Pffffft. You guys talk like you can't buy female companionship... ;)

refugeefromcalif
03-29-2013, 07:20 PM
Pffffft. You guys talk like you can't buy female companionship... ;)

No need to buy companionship when it's cheaper too Rent it... :lol:

Chris, the project is looking better all the time!

George

ccurzio
04-01-2013, 02:22 PM
http://www.youtube.com/watch?v=_d137zZfyco

Mike C.
04-01-2013, 03:48 PM
niiiice!

ccurzio
04-12-2013, 04:17 PM
This project is going slowly, but it might slow down even more real soon because I'm trying to buy something else:

http://i.imgur.com/6G9FOFll.jpg

Dangermouse
04-12-2013, 04:23 PM
Two car garage with an attached house?

ccurzio
04-12-2013, 04:25 PM
Two car garage with an attached house?

Pretty much, yeah.

It's a real shame that the garage at another one of the houses I saw yesterday wasn't attached to this house. That was a two-car garage with an attached workshop that by itself was the size of the two-car garage. :(

DL4567
07-22-2013, 03:51 PM
I've been watching Knight Rider on G4 lately, and keep meaning to post. Anything happening with your KITT lately? Is the house taking up all your time still?

Farrar
07-22-2013, 04:41 PM
a two-car garage with an attached workshop that by itself was the size of the two-car garage.

I just saw something similar today.

20658

ccurzio
07-22-2013, 06:57 PM
Other than moving the car to the new house, I haven't had time to do ANYTHING to it lately. Just started trying to get my old house sold.

ccurzio
10-05-2013, 06:13 PM
So one of my earlier posts in this thread showed a bit of progress with the preface that emphasized the sort of thing you can accomplish when you don't have a girlfriend. As it happens, I have a girlfriend now and she and I have been seeing one another for quite some time, so progress on this project has stalled quite a bit.

Until today.

She's at work all day and I've been home, so I took the opportunity to finally tackle the goddamn front bumper nose. After some disassembling, a little bit of grinding, a good amount of cursing, and finally some bolting and tinkering, this happened:


http://www.youtube.com/watch?v=JtS-_rsrrdA

Dangermouse
10-05-2013, 07:20 PM
Nice!!

thirdmanj
10-05-2013, 07:35 PM
How are the brakes? :devil:

Jimmyvonviggle
10-05-2013, 08:01 PM
How are the brakes? :devil:

:rofl:

ccurzio
10-05-2013, 08:42 PM
How are the brakes? :devil:

Perfect. :D

Back when I lived in Gainesville, my neighbor and I tore down the entire brake system and put in all new parts. Rotors, calipers, pads, you name it. It was part of the overall suspension/wheels restoration.

Ron
10-05-2013, 09:48 PM
Me likey!

mluder
10-06-2013, 04:21 AM
That's awesome, Chris!

Cheers
Steve

ccurzio
10-06-2013, 08:54 PM
Thanks guys. :)

I hope to have the car painted sometime early next year, at which point the exterior conversion will be complete.

Kenny_Z
10-06-2013, 08:59 PM
Looking really good. That is too cool.

MML
02-21-2014, 09:07 PM
How's this coming along Chris?

I have an ulterior motive in bumping this, actually... my buddy's KITT needs an engine swap, and I have no idea where one could be found in this part of the world... I'm open to suggestions!
He'd rather not go as far as the US/mainland Europe, with shipping costs etc.

Dangermouse
02-21-2014, 10:51 PM
KITT with a PRV, now that would be a turnaround.

dustybarn
02-22-2014, 12:21 AM
How's this coming along Chris?

I have an ulterior motive in bumping this, actually... my buddy's KITT needs an engine swap, and I have no idea where one could be found in this part of the world... I'm open to suggestions!
He'd rather not go as far as the US/mainland Europe, with shipping costs etc.

A Rover V8 might be made to work without too much fuss, given that it's an ex-GM design.

ccurzio
04-28-2014, 01:17 PM
So if I can get the battery charged, I'll be taking this guy in today to get an estimate on the necessary paint and body work.

Wish me luck.

ccurzio
04-28-2014, 04:36 PM
Damage would be roughly $5k, plus the costs for various parts I'd need to obtain on my own. (Weatherstripping and molding, mostly.)

It may take a little longer to paint this car than originally expected. :(

MML
04-30-2014, 06:19 AM
Chris, where did you get your scanner? My buddy thinks it's great, and wouldn't mind putting one in his car.

Soundkillr
04-30-2014, 09:11 AM
Chris, go see Ed at miracle glo on Buford hwy in norcross. They can do all kinds of paint jobs, from budget to show paint, and there prices are awesome! Their painter is really good to. Been dealing with them for years. Just something to think about....l

ccurzio
12-20-2014, 09:00 AM
It's been a while since I've been able to get around to working on this thing, but I managed to get some work (and some non-work) done on the car. The heater core has been long overdue for a replacement, and I've finally gotten that finished. (Much less effort considering the car has no interior.)


Chris, where did you get your scanner? My buddy thinks it's great, and wouldn't mind putting one in his car.

Lectric Enterprises (knight-f2k4.com) built it. Bear in mind that while it's the most screen accurate scanner you can get and it's very high quality, there's a waiting list to get one.

They're also not at all inexpensive.


Chris, go see Ed at miracle glo on Buford hwy in norcross. They can do all kinds of paint jobs, from budget to show paint, and there prices are awesome! Their painter is really good to. Been dealing with them for years. Just something to think about....l

Thanks for the suggestion! I'll definitely talk to them, but the good news is that I found a place right near my house that will do all of the necessary work for less than $3k - INCLUDING adjusting the body panels and painting the entire car. Having dealt with them several times in the past, I know they do good work. But I'll definitely still check with Miracle Glo when the time to paint gets closer.

ccurzio
12-21-2014, 02:08 PM
Started working on the upholstery today.

http://i.imgur.com/Q7AXAjL.jpg

ccurzio
12-23-2014, 01:29 PM
Wheels!

http://i.imgur.com/R48DDzul.png

Gary Weaver II
12-23-2014, 01:44 PM
Looking good Chris. Are those 15" or 14" rims? I used 14" on mine KITT a few years back and couldn't notice any real difference.

-Gary

ccurzio
12-23-2014, 02:18 PM
Thanks.

I'm pretty sure these are 15s. I've had them for a while, I just haven't mounted them until now.

ssaleen
01-06-2015, 12:11 AM
http://portland.craigslist.org/clk/cto/4834306408.html
Here's one by me all done

ssaleen
01-06-2015, 12:13 AM
32328

Riley88
01-06-2015, 03:15 AM
32328

Hi der!

ccurzio
01-06-2015, 11:58 AM
What fun is that?

Besides... that's a season 4 nose. No thanks! :)

DMC5180
01-06-2015, 01:36 PM
What fun is that?

Besides... that's a season 4 nose. No thanks! :)

Maybe you should build one with pursuit mode or "C" button.

knightjp
01-11-2015, 07:36 AM
How's this coming along Chris?

I have an ulterior motive in bumping this, actually... my buddy's KITT needs an engine swap, and I have no idea where one could be found in this part of the world... I'm open to suggestions!
He'd rather not go as far as the US/mainland Europe, with shipping costs etc.

You could put in a Rover V8 or a Lexus V8. The Lexus would certainly give you more power and be more reliable if built and properly installed.

ccurzio
01-23-2015, 06:49 PM
Maybe you should build one with pursuit mode or "C" button.

I've actually seen video of someone who did manage to construct a functional SPM replica. (For anyone with Facebook, it's here (https://www.facebook.com/video.php?v=634766626644890).)

As badass as that is, I won't be going quite that far. :)

DL4567
01-23-2015, 08:51 PM
I've actually seen video of someone who did manage to construct a functional SPM replica. (For anyone with Facebook, it's here (https://www.facebook.com/video.php?v=634766626644890).)

As badass as that is, I won't be going quite that far. :)

HOLY SHIT!

That's very impressive. But yeah, not worth all the trouble and mechanics for something so rarely used. Do the rear parts work too?

ccurzio
01-23-2015, 09:13 PM
HOLY SHIT!

That's very impressive. But yeah, not worth all the trouble and mechanics for something so rarely used. Do the rear parts work too?

No idea. What you saw is what I saw. But I can't imagine them going through all of the trouble to do the front while ignoring the back.

And yeah, "HOLY SHIT!" was my response too. :) I was watching the video thinking "Okay, so what am I supposed to be looki--OH SHIT."

ccurzio
01-25-2015, 07:16 PM
Just ordered this thing:

http://i.imgur.com/96ZT2qQ.jpg

$20 through Haynes direct, with free shipping.

ccurzio
01-26-2015, 08:09 PM
Rear seats are finished.

http://i.imgur.com/2U5jv8Z.jpg

ccurzio
02-02-2015, 03:41 PM
Front passenger seat is done. (Minus the headrest. Turns out that's the most difficult part and I managed to ruin one of them with my heat gun.)

http://i.imgur.com/jMBgXRM.jpg

DL4567
02-02-2015, 04:16 PM
Looks pro! You should go into business.

ccurzio
02-02-2015, 04:28 PM
Heh, thanks. I think this one time will be enough for me. This kind of work really beats up your hands.

Besides, I think any chance of my "pro" status went out the window when I wrecked my headrest material. I still have no idea how to get it on there when I get a replacement.

ccurzio
02-24-2015, 03:49 PM
Guess what's most likely heading into a paint booth sometime in the next week? :)

Dangermouse
02-24-2015, 04:04 PM
Your seats?


I think you're doing it wrong :o

ccurzio
02-24-2015, 04:06 PM
Your seats?

I think you're doing it wrong :o

It's a lot less trouble than reupholstering them. ;)

DMCMW Dave
02-24-2015, 04:09 PM
It's a lot less trouble than reupholstering them. ;)

You know this picture is going to end up on the internets somewhere in a post about some tasteless idiot putting brown cloth seats in a DeLorean, right?

ccurzio
02-24-2015, 04:16 PM
You know this picture is going to end up on the internets somewhere in a post about some tasteless idiot putting brown cloth seats in a DeLorean, right?

Hahaha, WOW! I hadn't even thought of that! :hysterical:

TOUCH MY VELOUREAN. TOUCH IT.

ccurzio
02-24-2015, 07:04 PM
Speaking of seats, I took care of refinishing the head rest receptacles.

http://i.imgur.com/OrURfszl.jpg

ccurzio
03-04-2015, 03:02 PM
It's in to be painted! Here's the last shot of me dropping it off.

http://i.imgur.com/27QV8bml.jpg

Should be sanded down by Friday, and painted by early next week.

ccurzio
03-24-2015, 10:18 AM
While the car is (still) in the shop getting prepped and painted, I took the time to wire up and program the car's main computer. Everything is installed and running EXCEPT for the system that will be powering the car's user interface and data parsing. The relays are all working and all of the sensors are operational.

http://i.imgur.com/dRiFxnwl.jpg

Sensors include:
- Full GPS (Coordinates in both NSEW as well as Degrees, altitude, etc.)
- Magnetometer (That's a Compass)
- Accelerometer (to accurately measure the car's tilt on any axis)
- Lux Sensor (Ambient light levels)

I also have various temperature sensors that will be placed around the car:
- A temperature/humidity sensor inside of the main computer's housing. The temperature portion will tell me how hot the housing is getting, and since the air will be cycled through the box, the humidity sensor will give a pretty accurate estimate of the humidity of the passenger cabin.
- A dedicated temperature sensor for the passenger cabin,
- A temperature sensor for the outside temperature,
- One to measure the intake air temperature,
- And a high-temp model to measure the engine coolant temperature.

The relays are controlled by a pair of Arduino microcontrollers. One of the Arduinos talks to a pair of relays, and is powered on at all times. These two relays will allow accessory mode to be powered up, as well as the car's ignition. The second Arduino powers on alongside the main computer, only when the car is actually running. This one receives the rest of the sensor data from around the car, and talks to an additional 8 relays for controlling various other things on the car.

I suspect I'll need to add more relays at some point. I might need an external relay module since this box is getting kind of cramped.

Dangermouse
03-24-2015, 11:40 AM
Sensors include:
-
- Accelerometer (to accurately measure the car's tilt on any axis)


I have to ask - why? What will you use this one for?

ccurzio
03-24-2015, 11:47 AM
I have to ask - why? What will you use this one for?

Measuring the car's tilt on any axis. :D

Same reason I have the light sensor, and why I have a geiger counter hooked up to Faye at home. Because why not? I like data. (Although the light sensor will actually be slightly more useful; I will be able to have the car decide when the headlights should come on.)

DMC5180
03-24-2015, 12:39 PM
I guess you plan on doing two wheel stunt driving.

Dangermouse
03-24-2015, 01:46 PM
Measuring the car's tilt on any axis. :D

Same reason I have the light sensor, and why I have a geiger counter hooked up to Faye at home. Because why not? I like data. (Although the light sensor will actually be slightly more useful; I will be able to have the car decide when the headlights should come on.)

That's what I assumed you would use the light sensor for - that and possibly varying the intensity of the red light bar at the front.

"Because why not" is a perfectly valid reason for having it to collect data, just wondering if you would use the data for something.

ccurzio
03-24-2015, 03:10 PM
"Because why not" is a perfectly valid reason for having it to collect data, just wondering if you would use the data for something.

Nope! At least not immediately. :)

Tillsy
03-24-2015, 06:53 PM
I have to ask - why? What will you use this one for?

To monitor angles during turbo boost...

DMC5180
03-24-2015, 07:02 PM
"ski mode"

ccurzio
03-25-2015, 12:23 PM
To monitor angles during turbo boost...

http://i.imgur.com/21wxFmcl.png

valdez
03-25-2015, 02:31 PM
Where are you attaching the rain gauge?

ALEXAKOS
03-25-2015, 02:33 PM
Awesome work!!
Looks like a wired suitcase ready to explode.
Try pulling that thought the airport control and explain what it is! Hahahaha

ccurzio
03-31-2015, 02:37 PM
Guy at the shop where I'm having the body work done says he'll sell me a twin turbo 350 for $5k. I passed. :)

In any event, they've been fixing some body imperfections and sanding the shit out of the car over the past few weeks. It turns out that the old paint job was some kind of nasty piss-poor job with some bad paint that was either a bad mix, or not cured properly. It's been gumming up the sandpaper instead of flying off as dust, making the job take a hell of a lot longer than it was supposed to.

We're about down to bare metal now, and it's scheduled to finally get some primer this afternoon. I'll post pics later today.

DMC5180
03-31-2015, 03:54 PM
I'm surprised they didn't strip it instead of sanding.

ccurzio
03-31-2015, 04:54 PM
They did, in some sections. In the areas where the paint was going its goop-gum dance, they hit it with some airplane stripper. The body needed a lot of help in a lot of places.

I'll be heading up there shortly to have a look at the progress.

ccurzio
03-31-2015, 07:44 PM
http://i.imgur.com/puUWkHll.jpg

Needs more molecular-bonded shell.

ccurzio
04-04-2015, 01:00 PM
http://i.imgur.com/jsNSjg4.jpg

DMC5180
04-04-2015, 08:21 PM
Nice. Where are you getting all the dash goodies?

DMC-81
04-04-2015, 08:27 PM
Super cool!

:popcorn:

ccurzio
04-05-2015, 11:34 AM
Nice. Where are you getting all the dash goodies?

My electronics are coming from Lectric Enterprises. It's a guy named Brenon that does amazing work on this stuff.

He's the same guy that made my scanner.

ccurzio
04-06-2015, 07:59 PM
While out renewing my tag today, I took the opportunity to apply for a vanity plate.

KNIGHT was taken. (No surprise there.)
KN1GHT was taken. (Also not too surprising.)

K2000 was not taken, so I nabbed that one. Not too bad I suppose. Gets the point across.

DMCMW Dave
04-06-2015, 08:07 PM
While out renewing my tag today, I took the opportunity to apply for a vanity plate.

KNIGHT was taken. (No surprise there.)
KN1GHT was taken. (Also not too surprising.)

K2000 was not taken, so I nabbed that one. Not too bad I suppose. Gets the point across.

KNYGHT? kind of hokey but would have worked. Like some of the really perverse spellings of DeLorean I've seen on plates.

ccurzio
04-06-2015, 08:09 PM
KNYGHT? kind of hokey but would have worked. Like some of the really perverse spellings of DeLorean I've seen on plates.

Yeah, too hokey for my tastes. Thanks though. My girlfriend had suggested KNYTE but I felt the same way about that one too.

I was originally going to settle for KI2K, but I think I like K2000 better.

DMC5180
04-06-2015, 08:09 PM
I ran across this yesterday and thought you might be interested.

http://www.mintmodels.com/K.A.R.R.-KnightAutomatedRovingRobotin118ScalebyMattelHotWhe els.aspx

ccurzio
04-06-2015, 08:25 PM
I ran across this yesterday and thought you might be interested.

http://www.mintmodels.com/K.A.R.R.-KnightAutomatedRovingRobotin118ScalebyMattelHotWhe els.aspx

Thanks! It's nice, but not $100 nice. :)

That said, they went balls-out on the accuracy - however I DO see an error. I spy with my little eye a row of green LEDs on the outer edges of the gas pedal. KITT received that modification after he was rebuilt at the beginning of Season 3. That was a Bonnie Barstow custom special; KARR was never equipped with that mod. :)

DMC5180
04-06-2015, 08:47 PM
Considering it only appeared in one episode in two tone that I know of I would consider it rare that it was even produced. It's only money.

I wish I could find a very rare 1:18 scale 85 mustang GT (black). Only a couple thousand were made. Daves S. has one in his Office. I'm jealous.

I owned the real 85 1/2 w/ T-top for 5 years prior to selling it to help buy my D in 94.

All I'm saying is don't pass up the chance you might regret it.

mluder
04-07-2015, 03:39 AM
While out renewing my tag today, I took the opportunity to apply for a vanity plate.

KNIGHT was taken. (No surprise there.)
KN1GHT was taken. (Also not too surprising.)

K2000 was not taken, so I nabbed that one. Not too bad I suppose. Gets the point across.

Why not "KITT" ??? I know it's not screen accurate but...

Cheers
Steve

ccurzio
04-07-2015, 08:46 AM
Why not "KITT" ??? I know it's not screen accurate but...

Cheers
Steve

Once KNIGHT and its one obvious variation was taken, I didn't even bother with the straightforward plates. Besides, KITT is most likely taken anyway. :)

Dangermouse
04-07-2015, 09:52 AM
If only they had a handy-dandy online plate config tool so that you could enter your choice of letters and see if that one is taken, rather than standing there at the dmv and taking up everyone's time.

No personal info given out, just "Is It Available Yes/No"

ccurzio
04-07-2015, 10:42 AM
If only they had a handy-dandy online plate config tool so that you could enter your choice of letters and see if that one is taken, rather than standing there at the dmv and taking up everyone's time.

No personal info given out, just "Is It Available Yes/No"

Seriously. I've been wanting this for over a decade.

DavidProehl
04-07-2015, 10:49 AM
Looks like some states do...at least Nevada:
https://dmvapp.nv.gov/dmv/vr/plateav/plateav_input.aspx

DMCMW Dave
04-07-2015, 10:56 AM
If only they had a handy-dandy online plate config tool so that you could enter your choice of letters and see if that one is taken, rather than standing there at the dmv and taking up everyone's time.

No personal info given out, just "Is It Available Yes/No"

Illinois does that. One of the few things in Illinois that works extremely well is the Secretary of States office (DMV everywhere else).

You can go on the website and try different combinations and it shows you the plate. Keep in mind that they do have restrictions on combinations, i.e. letters before numbers, can't be mixed up,, seven letters max.

KN1GHT would not work here for example. Nor would DELOREAN (too many letters)

https://www.ilsos.gov/PickAPlateWeb/index1.html

DMC5180
04-07-2015, 02:49 PM
Wisconsin has online personal plate look-up also. 7 character maximum.

Tillsy
04-08-2015, 12:55 AM
Likewise here in the land of oz.

mluder
04-08-2015, 01:46 AM
Seriously. I've been wanting this for over a decade.

No kidding. I went in with 4 options and I swear after the 2nd "Not available" I was pretty sure she wasn't even checking until I got to the last one and it was miraculously available.
How hard is it to have a database? The info already exists.

Steve

ccurzio
04-08-2015, 03:05 PM
Back on topic:

http://i.imgur.com/cwrTdz5l.jpg

Not finished but it's close. Still needs to be wet sanded, and the bumper/nose/mirrors/vent/hubcaps need to be painted and then wet sanded, then the hatch trim needs to be painted along with the third brake light. Then the body panels get straightened and the front fog lights get mounted.

mluder
04-08-2015, 04:22 PM
Back on topic:

http://i.imgur.com/cwrTdz5l.jpg

Not finished but it's close. Still needs to be wet sanded, and the bumper/nose/mirrors/vent/hubcaps need to be painted and then wet sanded, then the hatch trim needs to be painted along with the third brake light. Then the body panels get straightened and the front fog lights get mounted.

HA! HA!

That's awesome!

Steve

DMC5180
04-08-2015, 04:56 PM
Looking good!

I'm curious, were the wheels factory or was that done for the show?

ccurzio
04-08-2015, 05:09 PM
I'm curious, were the wheels factory or was that done for the show?

Factory trim option. The wheels themselves are Trans Am turbo wheels, only available from '82 to '84. The matching "bowling ball" hubcaps went with them.

DMC5180
04-08-2015, 05:17 PM
Now that you mention it. I had a HS class mate that got a brand new 82 T/A (white). I think his car had those covers.

ccurzio
05-08-2015, 11:34 AM
Prior to full sanding, but out in the sunlight:
http://i.imgur.com/LEQi62wl.jpg

New license plate:
http://i.imgur.com/rb4tJ9Nl.jpg

ccurzio
05-23-2015, 03:56 PM
It's finally back home now. Did a little wiring today.


https://www.youtube.com/watch?v=mMi5Sy7b4gg

Kenny_Z
05-23-2015, 06:13 PM
That looks awesome. Nice work.

mluder
05-23-2015, 09:08 PM
Prior to full sanding, but out in the sunlight:
http://i.imgur.com/LEQi62wl.jpg

New license plate:
http://i.imgur.com/rb4tJ9Nl.jpg

Good choice!

ccurzio
05-24-2015, 10:25 AM
Thanks guys. :) The car still needs some touch-ups here and there and then another full-body wet sand and buff, but it's getting there.

Now I need to start on the interior, but before I can do that I need to send off my seat belts to be re-webbed. Once they're back, I can lay down the carpet and get the interior trim and the seats back in.

DL4567
05-24-2015, 04:20 PM
The car still needs some touch-ups here and there and then another full-body wet sand and buff, but it's getting there.

The paint shop sent it home with you before they were done???

ccurzio
05-25-2015, 08:41 AM
The paint shop sent it home with you before they were done???

Yes and no. They put on a LOT of clear and wanted to give it a month or so to cure fully before hitting it again.

DL4567
05-25-2015, 03:15 PM
Okay, that makes sense. Did they use more clear than normal to make it "extra" shiny like KITT should be compared to a "normal" black car?

ccurzio
05-26-2015, 03:57 PM
It was more to make sure everything is even across the entire car.

The reason he said to take it home was because he knew I had work to do to it. This way if I manage to scratch anything while I'm doing what I need to do, he can fix it.

DMC5180
05-26-2015, 03:59 PM
How long before you have the necessary dash parts?


Dennis

ccurzio
07-23-2015, 04:32 PM
How long before you have the necessary dash parts?


Dennis

The dash itself came today but I wasn't here to receive it. It'll be re-delivered tomorrow.

I've had the electronics overlays for a few months now, but the electronics themselves are still in the process of being built.

mr_maxime
07-23-2015, 07:51 PM
I think I might have seen you driving around. I saw a knight rider car leaving my dads house in Cobb the other week.

ccurzio
07-24-2015, 05:14 PM
I think I might have seen you driving around. I saw a knight rider car leaving my dads house in Cobb the other week.

Likely not. Mine hasn't been anywhere other than the local auto shop and my house for like the past 4 months.

Though I'd love to know who else in Cobb has one.

ccurzio
07-24-2015, 05:15 PM
This came today.

http://i.imgur.com/jn9zNfj.jpg

GS450-Junkie
07-25-2015, 10:31 AM
I saw a knight rider car leaving my dads house in Cobb the other week.


Perhaps you could ask your dad who was visiting him? lol I kid....

ccurzio
07-25-2015, 10:44 AM
http://i.imgur.com/0ex7wuvl.jpg

Andrew
01-20-2016, 05:05 PM
Hey Chris: I'm also building a Kitt replica. What brand of "Lt Buckskin" paint did you use on the interior trim? Also did you re-dye your stock door panels or did you purchase new ones?

Thanks,

Andrew
4194
5052
1983 Trans Am

D-guy
01-21-2016, 10:33 AM
I got a chance to drive down to Michigan years ago. Just to see this guy. http://louisellenterprises.com/
Very nice fellow to take the time out to visit with a fan boy. http://uploads.tapatalk-cdn.com/20160121/90e830fa2568a99907526b547428c6fc.jpg

Damn those cars are cool.


Sent from my iPhone using Tapatalk

ccurzio
01-25-2016, 10:07 PM
Hey Chris: I'm also building a Kitt replica. What brand of "Lt Buckskin" paint did you use on the interior trim?

SEM Color Coat. It's seriously the best shit out there.


Also did you re-dye your stock door panels or did you purchase new ones?

Bought a new set from Hawk's.


I got a chance to drive down to Michigan years ago. Just to see this guy. http://louisellenterprises.com/

Eeeeyup. Rob's the guy that made my fiberglass dash.

ccurzio
02-21-2016, 06:19 PM
Movement on this project has been ridiculously slow, but I'm happy to report some progress:

- New water pump.
- New, very beefy alternator. (The halogen scanner on the front is a power-hungry beast)
- Replaced the mechanical speed sensor on the transmission with an electronic sensor.
- Permanent mounting brackets for the scanner, with a firewall port for the wire.
- Added two additional fuse panels bolted on the outside walls of the front footwells - one activated on "accessory" with the ignition, the other always live.
- 3 out of 4 of the seats are fully reupholstered, including headrests.

Dashboard progress:

- Dash electronics have been fully tested and are 100% operational.
- Voicebox frame is installed in the fiberglass dash and 90% surface finished. Needs some more Bondo and sanding.


https://www.youtube.com/watch?v=fNtNX1oCuwg

Next up:

- Paint needs to be redone in many areas. Chemical reactions in the primer and filler areas are causing bubbling.
- 80% of the exterior non-headlight bulbs have been upgraded to LEDs. Rear lights are having some electrical problems.
- Reupholster the driver's seat and headrest.
- Install sound deadener throughout the car.
- Replace all 4 speakers, possibly add one or two more.

ccurzio
10-08-2016, 01:44 PM
Replaced the shitty Pontiac AMR factory speakers with a set of Alpine SPE-6090s.

http://i.imgur.com/RxlJJ6vl.jpg

ccurzio
11-26-2016, 12:05 PM
Progress on this project is at a near-standstill. The mechanic friend (or who I thought was a friend) who was helping me out screwed me over big time. The fucker had my car for a YEAR AND A HALF and gave it back to me in worse shape than when I dropped it off. He's moved on to a different job and is avoiding my phone calls. Son of a bitch.

Anyway, today I pulled out the driver's seat - the very last seat needing upholstery - and the last bits of carpet. Speaking of carpet, the new carpet I had sitting in my garage along with random bits of cloth interior pieces seems to be ruined, needing replacement.

http://i.imgur.com/mKTqUk3l.jpg

Thanks to said mechanic "friend" I no longer have functional tail/brake lights, the door seals are in shit shape, the entire car needs to be wet-sanded, the seal around the windshield is screwed up, and I have no driver door mirror.

In the interim, I'm prepping the interior shell for sound deadening installation.

MML
11-26-2016, 09:13 PM
Holy crap Chris, sorry to hear that. I had recently just been wondering how the car was coming along.

ccurzio
11-27-2016, 05:22 PM
Thanks. Yeah, it's a shit situation for sure. I'm fucking furious with the guy. I thought he was a nice person and I helped him out with some shit a few times (drove him to Alabama for some personal matters), and he ended up screwing me. All I wanted him to do was give my car a good paint job and fix a few minor things that needed fixing. Instead, he gave me a shit paint job, broke a bunch of stuff, and skipped out on me. What a piece of shit.

The ruined carpet and fabric (thanks to my garage) was just another kick to the balls. I'll press on, but this is a gigantic setback in an already ridiculously long process.

ccurzio
03-28-2017, 01:03 PM
Took this photo at Whole Foods the other day. HOW WRONG IS THIS?! :(

49884

Dangermouse
03-28-2017, 01:15 PM
Well, it's black.....

did it have the red light thingy on the front?

ccurzio
03-28-2017, 01:18 PM
Well, it's black.....

did it have the red light thingy on the front?

I didn't look. I was leaving the parking lot when I saw this.

A freaking Nissan Leaf is why I had to settle for K2000.

DL4567
03-28-2017, 02:38 PM
I feel your pain bro! That would really piss me off too.

Although if you previously applied for that plate and found out it was taken, the chances of you later seeing that car randomly in all of Georgia are pretty incredible.

ccurzio
03-28-2017, 04:32 PM
Although if you previously applied for that plate and found out it was taken, the chances of you later seeing that car randomly in all of Georgia are pretty incredible.

Yeah it's pretty crazy. When I did apply and found out it was taken, I figured some other replica builder got extremely lucky. BUT NO.

Mark D
03-28-2017, 04:44 PM
Who's to say the guy doesn't have a KITT replica but just has that plate on his daily driver? Should have left him a note. Or maybe if he doesn't have a replica of his own and knew he could give up his plates to someone that had one he's release it to you.

ccurzio
03-28-2017, 05:16 PM
Who's to say the guy doesn't have a KITT replica but just has that plate on his daily driver?

:8ball:


Or maybe if he doesn't have a replica of his own and knew he could give up his plates to someone that had one he's release it to you.

That's some impressive creative thinking.