Log in

View Full Version : General Inspection - Would I fail?



mowpow
01-25-2013, 04:29 PM
I live in Tarrant County, TX and was about to go get my first inspection but noticed one of the two license plate lights is burned out (or not working). I put an order in to replace the bulb but just wanted to get some thoughts on whether I would fail over that. One light is working. Interested in hearing thoughts on this.

Michael
01-25-2013, 04:51 PM
Go to your local parts store, spend a buck and replace the bulb and live happily ever after.

WelmoedJ
01-25-2013, 05:57 PM
Lights on the car should work. Period.
If they don't work they may send you off to get it replaced.
Upon replacement and if working again, they will do the inspection.
They also may charge you twice.

thirdmanj
01-25-2013, 07:44 PM
It all depends on the integrity of your inspector. ...for all he knows, it went out after he inspected it!

mowpow
01-25-2013, 07:45 PM
I didn't realize that bulb was that common that I could get it in the local parts store. I am used to not even trying heh.

ccurzio
01-25-2013, 08:02 PM
No car is specialized enough to require bulbs that won't fit on any other car.

Michael
01-25-2013, 08:31 PM
No car is specialized enough to require bulbs that won't fit on any other car.

I used to think that until I got my Volvo..One of the visor vanity mirror lights was burned out. It was a very slim version of a normal fuse light and I had never seen one before. Ebay and amazon turned up negative. Turns out is's a Volvo dealer only item and they are 7 bucks each...for one tiny little bulb! It shouldn't bother me but I'm one of those types that has to have every single thing work even if I don't use it.

ccurzio
01-25-2013, 08:48 PM
I used to think that until I got my Volvo..One of the visor vanity mirror lights was burned out. It was a very slim version of a normal fuse light and I had never seen one before. Ebay and amazon turned up negative. Turns out is's a Volvo dealer only item and they are 7 bucks each...for one tiny little bulb! It shouldn't bother me but I'm one of those types that has to have every single thing work even if I don't use it.

I should have specified exterior lights.

Vanity mirrors are specialized enough that something silly like that will sometimes need a specific or manufacturer's-only bulb. But something mandated as a safety feature and a DOT requirement (like every exterior light) is going to be found everywhere.

Notifier
01-25-2013, 09:54 PM
By rights, as long as the license plate is illuminated you should be okay. If you look at most state codes or statues, they will more than likely not specify the number of bulbs for license plate illumination. Simply because some vehicles have only one bulb, while others have two. About the only good value of the two bulb system I can see is that if one burns out you have time to replace it before you get a ticket.

Now go for your inspection, will they fail you because one is burnt out? As long as they can clearly see the plate from 50' away, they shouldn't.

From the Texas transportation code:

TITLE 7. VEHICLES AND TRAFFIC
SUBTITLE C. RULES OF THE ROAD
CHAPTER 547. VEHICLE EQUIPMENT
SUBCHAPTER A. GENERAL PROVISIONS

Sec. 547.322. TAILLAMPS REQUIRED.

(f) A taillamp or a separate lamp shall be constructed and mounted to emit a white light that:
(1) illuminates the rear license plate; and
(2) makes the plate clearly legible at a distance of 50 feet from the rear.
(g) A taillamp, including a separate lamp used to illuminate a rear license plate, must emit a light when a headlamp or auxiliary driving lamp is lighted.

Citizen
01-26-2013, 08:23 AM
I live in Texas and have had this happen before. On a two bulb car, only one license plate bulb was working. The inspector passed me, and notified me as a courtesy that one was out.

My truck is different. The bumper has two openings for license plate lights, but the bumper came with only one light fixture. The rear bumper back in those days (1988 ) was optional when buying new pickup trucks, and this truck didn't have one at all (a week after taking delivery, I bought an after-market bumper). With two light holes, but only one light, still the truck has been passing inspection for the last 24 years.

And finally, in Texas if you fail the inspection, you have 30 days to make repairs and return to the same inspection station, and they are not supposed to charge you anything the second time. This happened to me on two different occasions, once for windshield wipers and once for tires.

Thomas

...

David T
01-26-2013, 12:02 PM
As a matter of pride I like everything to work on my car. As a practical matter if one bulb is already burnt out, now you have NO back-up if the other should blow out. In most States if you have illumination then it is supposed to work. While it is true you can get bulbs anywhere, some bulbs are harder to get then others. Try getting the bulbs for the headlight and hazard switch locally! A lot of the time the bulb is not burnt out, it is just a bad/dirty connection. Pull the bulb and check it with a meter.
David Teitelbaum