Log in

View Full Version : Engine Weird high pitch sound coming from driver front area



mowpow
01-25-2013, 07:50 PM
Just got my car all back together. New brakes, SS brake lines, hubs, and tie rod ends (fuel and coolant too but not sure it's applicable). On occasion when I am going down the road at 45 or so, or even sometimes at slower speeds, there is a high pitch, friction type noise that is coming from what I think is the drive side front wheel area. At first I thought maybe the brakes are dragging on that side but it fades in and out when I turn the wheel fast in each direction. It doesn't all the time, but it seems pretty loud when it does. If I hit the brakes it goes away so maybe it's the caliper? Any thoughts on how I can troubleshoot this to see if it's the caliper or hub or even the speedometer plastic cover thingy?

Thanks,
Jake

Jonathan
01-25-2013, 10:54 PM
Just got my car all back together. New brakes, SS brake lines, hubs, and tie rod ends (fuel and coolant too but not sure it's applicable). On occasion when I am going down the road at 45 or so, or even sometimes at slower speeds, there is a high pitch, friction type noise that is coming from what I think is the drive side front wheel area. At first I thought maybe the brakes are dragging on that side but it fades in and out when I turn the wheel fast in each direction. It doesn't all the time, but it seems pretty loud when it does. If I hit the brakes it goes away so maybe it's the caliper? Any thoughts on how I can troubleshoot this to see if it's the caliper or hub or even the speedometer plastic cover thingy?

Thanks,
Jake

Yes, it is the caliper. One or more of the pistons is likely sticking. Take the caliper apart and find out. Replace the problematic parts and reassemble. If you buy a pad set you'll get the hardware kit and that includes the anti-rattle clips. Install those on the fronts if they aren't there already.

David T
01-26-2013, 12:08 PM
Did you use your anti-squeal shims? Did you install them correctly? Some venders sell springs you install over the pins to prevent noise. It could just be the pads need to wear in.
David Teitelbaum

mowpow
01-26-2013, 04:56 PM
Good points here thanks for the replies. I took the car out again today and it did it way less so I am wondering if it's wear in type of thing. I'll keep an ear out for it. I have Hervey's entire brake set in and looks like he uses springs.

Dangermouse
01-26-2013, 05:03 PM
I like that you note that the sound is coming from the front of the car yet you list the thread under "engine" :)

mowpow
02-05-2013, 12:07 AM
Haha, oops, I thought I selected Other, my fault but funny indeed.

Been troubleshooting this some more and I dunno what the heck this sound is. It seems to be when I turn the wheel to the left, the sound comes back, even if I turn slightly it start squealing. I did replace my hub and bearings up front, so maybe that's it? Definitely going to tighten up the hub while I'm in there, the stories of losing wheels scares the crap out of me.

Jake

DMCMW Dave
02-05-2013, 12:36 AM
Haha, oops, I thought I selected Other, my fault but funny indeed.

Been troubleshooting this some more and I dunno what the heck this sound is. It seems to be when I turn the wheel to the left, the sound comes back, even if I turn slightly it start squealing. I did replace my hub and bearings up front, so maybe that's it? Definitely going to tighten up the hub while I'm in there, the stories of losing wheels scares the crap out of me.

Jake

You won't lose the wheel even if the center nut comes clear off. The caliper will hold it on. Not very well, it will be wobbly and noisy, but you won't lose the wheel.

Losing all the lug nuts is a different story. . .

Make sure the shims are all in the right place and facing the right way (per the arrow on the shim) - if you miss the pin it will drag and make noises.