PDA

View Full Version : Frame & Body If my car is missing VIN plates and nothing on the headliner, can i find out the VIN?



eagle-co94
02-01-2013, 07:35 PM
That is the first question...

Michael
02-01-2013, 07:41 PM
The only way is to source the title or an older registration that you know to be from the car. Old service records may have it as well. If you are looking for proof however that your car is a certain vin, there isn't any except for the 2 vin plates....did you steal a Delorean?

dmc6960
02-01-2013, 07:42 PM
Remove the rear bumper, and you may find the VIN or one very close to it written in sharpie on the rear of the frame.

jawn101
02-01-2013, 07:45 PM
Remove the rear bumper, and you may find the VIN or one very close to it written in sharpie on the rear of the frame.

The number sharpied on the back of my frame had little or nothing to do with my VIN *or* frame number. Just a warning :)

eagle-co94
02-01-2013, 07:46 PM
Didn't steal a car, but I bought one as parts with no paperwork or plates. I imagine it was an insurance loss car. So if I remove the rear bumper and there's a number on the frame, is it the actual VIN or is it just a number close?

jawn101
02-01-2013, 07:51 PM
Just a thought - what if you look at the frame # (driver's side welded on/near the rear frame extension) and engine # (plate riveted near the dipstick) and compare them to the registry that Shannon publishes? I bet you'd find your match.

That sharpied number is not so helpful IMO.

Dangermouse
02-01-2013, 07:53 PM
Ah, the reclusive Vin XXX. :)

Do you want to find the VIN or prove the VIN.

If you have the frame # and or engine # you might be able to go through the DeLorean museum.

Perhaps then, if they have a window sticker or warranty card that has both VIN and another number you could work something out.

Did it never have plates or have they been removed?

Is it possible that the original plates are now on a different car?

eagle-co94
02-01-2013, 07:53 PM
No luck on the frame number in the registry. If I remember correctly, the engine number is forward of the driver's side engine mount on the block. Before I go crawling around underneath, can anyone confirm that?

jawn101
02-01-2013, 07:54 PM
No luck on the frame number in the registry. If I remember correctly, the engine number is forward of the driver's side engine mount on the block. Before I go crawling around underneath, can anyone confirm that?

Yup. Near the dipstick.

eagle-co94
02-01-2013, 07:55 PM
Dermot, I think I may have to go through the Museum, even if there is a sharpied number on the frame if it's not definitely the VIN number. I would like to find out what the VIN number is because I am torn between fixing 891 or this car.

jawn101
02-01-2013, 07:56 PM
Here's a shot of my engine number plate. Note the cat in the upper right corner of the picture...

Michael
02-01-2013, 08:06 PM
The frame number rarely matches the vin. Engine numbers prove nothing... Like mentioned earlier, knowing the vin from paperwork, records, etc. And proving the vin are 2 different things. If I were looking to restore this car for profit, I would seriously consider buying a parts car with a good title and vin plates. These 2 plates and a clear title are all that's needed (as far as the state is concerned) to have a legitimate car. Once these plates are affixed to a DeLorean....any DeLorean, then it becomes that vin. Not many cars out there have that kind of flexibility :)

eagle-co94
02-01-2013, 08:37 PM
That's why I bought 891. It's got a Salvage title...and I've got the VIN plates (and owe a pic to Shannon). I removed them from the car as a safety precaution because that car is wrecked so bad I actually pulled the section of body tub off with the main plate and the dash was laying in the car. This is 891 for those that didn't see the auction a few years ago:
http://i5.photobucket.com/albums/y154/eagle-co94/DeLorean/1_zps3604785e.jpg

As you can see there's not a lot there that's good besides oh, a gas flap hood, wheels, possibly engine, trans and maybe the frame if it isn't tweaked...but I think it might have to go to a frame shop. It's a 5 speed so that's what I'd prefer. XXX is an auto.

deloreanz
02-01-2013, 10:06 PM
I'm curious how complete the registry is. You already know those numbers can be excluded, but I doubt its complete enough that there are only a few missing entries in any month of production.

You might be able to infer a general time frame that the car was made based on the variations in hood, wheels, etc. I'm always learning about more little tweaks that were done at various times so you might be able to do some detective work if you're lucky enough for the car to have some rarer (early or late) features. Further investigation might yield some original owner info, or as others have said, registration info or plate number.

I know the welded frame number, sharpie frame number, and engine numbers don't equal VINs but it might give an indication of an era. I could be wrong on this but my understanding is that frame N was in the factory the same time VIN N was being built, so even though my VIN is 5086 my frame had a similar number 5074. I imagine there might be cases where certain frames or VINs were pulled out of the loop and have no correlation but again my assumption has been this is not the normal case. In other words if your frame says 6000, it's probably not VIN 1000. Someone bop me on the head if this is wrong.
:smashfreak:

I wonder if there's some old receipt somewhere indicating where the car came from, or perhaps there's an oil change sticker indicating a place it had service?

jawn101
02-01-2013, 10:13 PM
I'm curious how complete the registry is. You already know those numbers can be excluded, but I doubt its complete enough that there are only a few missing entries in any month of production.

You might be able to infer a general time frame that the car was made based on the variations in hood, wheels, etc. I'm always learning about more little tweaks that were done at various times so you might be able to do some detective work if you're lucky enough for the car to have some rarer (early or late) features. Further investigation might yield some original owner info, or as others have said, registration info or plate number.

I know the welded frame number, sharpie frame number, and engine numbers don't equal VINs but it might give an indication of an era. I could be wrong on this but my understanding is that frame N was in the factory the same time VIN N was being built, so even though my VIN is 5086 my frame had a similar number 5074. I imagine there might be cases where certain frames or VINs were pulled out of the loop and have no correlation but again my assumption has been this is not the normal case. In other words if your frame says 6000, it's probably not VIN 1000. Someone bop me on the head if this is wrong.
:smashfreak:

I wonder if there's some old receipt somewhere indicating where the car came from, or perhaps there's an oil change sticker indicating a place it had service?

FWIW, my numbers are: VIN #2100, Engine #2692, Frame #839, and the sharpie number on the back was like #2107 (closer than I remembered, actually)

David T
02-01-2013, 10:22 PM
Sounds to me that when they sold the car as a parts car they NEVER wanted the car to be Titled again so someone removed he VIN plates. Without those plates you are NEVER going to be able to Title, register, or inspect the car. Even if you were to find and/or recreate a vin # for the car, without those plates what you have is a pile of parts in the shape of a car.
David Teitelbaum

awildermode
02-01-2013, 10:46 PM
Total stab in the dark. If you have the keys and they are original, send a picture to James at DMCH. He will be able to decode it and get you the VIN that matches the key.

Shep
02-01-2013, 11:43 PM
I could be wrong on this but my understanding is that frame N was in the factory the same time VIN N was being built, so even though my VIN is 5086 my frame had a similar number 5074. I imagine there might be cases where certain frames or VINs were pulled out of the loop and have no correlation but again my assumption has been this is not the normal case. In other words if your frame says 6000, it's probably not VIN 1000. Someone bop me on the head if this is wrong.
:smashfreak:Pass the inflatable hammer please ;)

My frame number is #98, and my engine number is #477. Neither correlates to any DeLorean VIN since those started at 500. I do not know this for a fact, but I suspect they started at one and made the engine and frames in batches. Knowing the frame and engine number can give you a somewhat broad range of possible VIN's, unless they are very far off (random example: frame 103 and engine 3982), in which case it's really anyone's guess since one or both may have been replaced.

ramblinmike
02-02-2013, 12:30 AM
Total stab in the dark. If you have the keys and they are original, send a picture to James at DMCH. He will be able to decode it and get you the VIN that matches the key.

I'm sure there are at least dozens of cars that match that key.

Shep
02-02-2013, 01:31 AM
I'm sure there are at least dozens of cars that match that key.Are there really that few combinations for DeLorean keys to have? Damn, that's kind of scary knowing someone else has the same keys I do...

Nicholas R
02-02-2013, 02:22 AM
Are there really that few combinations for DeLorean keys to have? Damn, that's kind of scary knowing someone else has the same keys I do...

Yes. For the 2 key system, if I recall correctly there are only something like 22 key codes.

WelmoedJ
02-02-2013, 04:48 AM
An addition:
If you remove the headliners in one of the doors, you most likely will find info.
It's on the inside door roof about who placed the doors and a date.
Gives a more precise timeframe when the car was built.
Doing so on both doors will make the timeframe even more narrow.

eagle-co94
02-02-2013, 10:17 AM
I learned the headliner method with my first D, 16336. That car had the "11336" written on it and a key code. Sadly, this door has nothing written on it.

I knew a guy once with a 66 Mustang who came out to his car to see another 66 Mustang parked next to him. By mistake he got into the wrong car because the door key worked, but not the ignition key. Yeah, he was quite shocked as well. I'm sure it can happen. Lets see how many people start trying other cars at the next DCS...

Citizen
02-02-2013, 10:43 AM
I knew a guy once with a 66 Mustang who came out to his car to see another 66 Mustang parked next to him. By mistake he got into the wrong car because the door key worked, but not the ignition key. Yeah, he was quite shocked as well. I'm sure it can happen. Lets see how many people start trying other cars at the next DCS...

Once, after a tiring 10 hour day playing softball, I came out to my car to go home, unlocked it, only to find a neat ‘Lil Oscar cooler in the back seat. I have no idea how it got there, but that was over 25 years ago, and I have been using it every since. Great little cooler!

Someone must have had the same key. Coincidentally, it also was a Mustang.

...

Michael
02-02-2013, 11:18 AM
I recently sold some lock smith equipment. Among the picks were a set of "jigglers". It was a set of about 7-8 key shaped blanks. According to the instructions, they would open the door locks of about 85% of all cars. Anyone can buy them and they were about 40 bucks for the set. Nothing is safe anymore.

WelmoedJ
02-02-2013, 11:51 AM
I learned the headliner method with my first D, 16336. That car had the "11336" written on it and a key code. Sadly, this door has nothing written on it.

I knew a guy once with a 66 Mustang who came out to his car to see another 66 Mustang parked next to him. By mistake he got into the wrong car because the door key worked, but not the ignition key. Yeah, he was quite shocked as well. I'm sure it can happen. Lets see how many people start trying other cars at the next DCS...

I opened a Fiat 850 (early 70s) and started it.
Only then I noticed it wasn't my car as the shift stick was longer than the one in my own car.

Before that I had a Japanese Isuzu stationwagon that could be opened with a simple screw driver.

I have never tried to open another DeLorean, but I have some 50 opportunities to test my key in the club :)

Kenny_Z
02-02-2013, 12:00 PM
I have two 66 Mustangs. A parts car and my driver. The trunk key of the driver will turn the ignition of the parts car.

Shep
02-02-2013, 01:41 PM
Yes. For the 2 key system, if I recall correctly there are only something like 22 key codes.Hold that thought: the door key for a two-key system alone isn't enough to point to a specific VIN, but in combination with the ignition key, it could narrow things down drastically. Assuming the keys are the original codes, DMCH might be able to come up with the right VIN if they're provided with both of them.


I learned the headliner method with my first D, 16336. That car had the "11336" written on it and a key code. Sadly, this door has nothing written on it.Perhaps a shot in the dark, but if the driver's door has nothing under the headliner, try the passenger door and see if anything is written under the headliner there. Might have some cave paintings that could be useful.

How early is VIN XXX by the way? As someone else said, check for features specific to certain VIN ranges. Case in point, the first few hundred DeLoreans (VIN's 500 to at least 814, possibly a bit further) had a hole in the trunk on the passenger side (http://dmctalk.org/showthread.php?4181-Passenger-side-wiper-fluid-tank), directly opposite the windshield washer reservoir, that was plugged up with the same rubber plug by the gas cap. It was a production error with the underbodies (evidently they thought it should be symmetrical when that was not the case). If yours has that, then it certainly narrows things down quite a bit. Textured pontoons is also a pretty good indicator of an early VIN. A thorough investigation might show spots on the underbody that are missing the gel coating, also somewhat common on the earlier VIN's (before they perfected the manufacturing process). Not sure about the VIN range for that though.

I just had a thought: I know the key code is sometimes written by the steering column, but is it possible that the VIN is written in the same general area? Might be worth looking into on the off chance that it is.

DMC5180
02-02-2013, 04:58 PM
Just did a little Lock code sleuthing. Apparently Delorean 81-82 and MG 78-81 share the same key blanks and codes. (Ignition)

The codes start at 7001 and go up. How far up, I'm not sure about. I have 70xx. I've seen a High 71xx. Any one have a 72xx, 73xx ,74xx etc.? How about 8xxx

I think James posted something about the Range of codes that were used by DMC

DMC3165
02-02-2013, 10:53 PM
First time coming across this thread.

I didn't see you mention anywhere if it has any of the early car trademarks (gas flap hood, black interior, dark wheels, etc). If it is odds are the last three of the VIN are behind the passanger side fender. Not sure if anyone else suggested you look there. But if it's an early car I'd try that. If you have no luck there I'd go with your original suggestion and try to cross reference the engine plate with the chassis number. In the Delo world sometimes they don't mean squat but you might get lucky. I'm pretty sure the info on 3165 in the VIN registry was right on. Good Luck.

eagle-co94
02-04-2013, 06:40 PM
The car has a gas flap hood, appeared to have dark grey wheels and black interior. The wheels were rough and have been replaced with a better set of dark grey wheels.

eagle-co94
02-04-2013, 06:52 PM
I was actually wrong in my previous post. Not sure why I thought he doors were blank. Maybe it's because the driver's door is so hard to read. The driver's door says "WED 20" and has a key code. The passenger door says "WED 8", "10.15 a.m." and has a key code. I'll have to see where that will get me.

Based on the issues with this car (and a rusty frame) I think 891 will get what it needs from this car to come back to life unless something else comes along.

eagle-co94
02-04-2013, 06:57 PM
It also has armrest caps. Not sure what the VIN range is on those.

DMC5180
02-04-2013, 07:36 PM
It also has armrest caps. Not sure what the VIN range is on those.

There Isn't one that I'm aware of. Those were for a Service Bulletin campaign available from dealers.

There are things you can look for to give indication of early vs late VIN though. just not THE VIN

Are there any indications it had VIN plates (drill holes)?

eagle-co94
02-04-2013, 08:01 PM
It appears as though there were VIN plates. There's obvious outlines of them and what looks like the studs left from the rivets in the dash.

DMC5180
02-04-2013, 08:11 PM
I'm really surprised there is nothing on the upper door frame. Mine has ( V 05180 next to the K7xxx key code)

DMC3165
02-04-2013, 08:33 PM
Just out of curiosity, I'd pull the passenger side fender. Based on your description of the car there's a good chance the last three digits of the VIN are there. They're large white numbers right on the fiberglass tub. From that point you'd be able to use the VIN registry for the rest of it. You may have a very early car on your hands!

eagle-co94
02-04-2013, 09:46 PM
I checked the cave painting thread to see if I was missing something and it appears as though there are lots of cars that don't have the VINs under the headliners. The drivers side is so faint it really doesn't show up in the pic at all. This is the passenger side:
http://i5.photobucket.com/albums/y154/eagle-co94/DeLorean/CIMG4360_zps085f5781.jpg

It reads "09071/19R" and I noticed that VIN 2861's passenger door has 20R on it, is there any significance to those digits? http://dmctalk.org/showthread.php?3083-Cave-paintings-post-your-pics!&p=85990&viewfull=1#post85990

David T
02-04-2013, 10:58 PM
Even if you found a clear vin # in a door, that by itself wouldn't be definitive unless both doors had the same #. I have seen some cars that did have a vin # in the door but it didn't match the car's vin # although it was close. You are chasing a phantom. Even if you did find a vin # there is nothing you can do with it. Those plates are VERY important and unobtainable. If all you were going to do is part the car out the vin means nothing as far as the parts are concerned. If you are trying to recreate the plates and vin to Title and register the car you need to go to your State's DMV and see what their procedure is for a case such as this. I have seen where cars were stolen and the vin # was changed by the robbers. The car was recovered. The State removed all of the numbers that were changed and made a plate and assigned a new number to the car. They can do that (if they want).
David Teitelbaum

eagle-co94
02-04-2013, 11:15 PM
When I first picked up the car before I went overseas I was certain that this would be what I was up against so I've been keeping an eye out for another car on the cheap. 891 showed up later in 2009 so I jumped on that. Even though it's a salvage title, it gives me what I need to fix one car or the other so that I can have a car that can pass inspection and put me on the road.:headbang:

Morpheus
02-05-2013, 05:24 PM
You don't happen to have a spare set of B pillar trim in one of these cars, do you?

eagle-co94
02-05-2013, 05:32 PM
I probably will, but not until I get a chance to look at the other parts I have coming out of storage. I think the parts off of XXX will all be spares. Sending you a PM...

DMC5180
02-09-2013, 03:46 AM
My numbers are written above the door glass. Here's my driver door. V 5180 lower right corner. Key code is to the left 70xxX

16446