Log in

View Full Version : Looking for Delorean sunvisor grey colored



Chris Burns
02-14-2013, 10:39 AM
I am helping a Delorean owner look for a grey sunvisor for their 83 Delorean. DMC doesn't seem have any. If you can direct one my way that would be great.

Thanks!

Kenny_Z
02-14-2013, 11:03 AM
Send a PM to Uhhair. He just stripped a D with grey interior. http://dmctalk.org/showthread.php?6117-Grey-Interior-Trim-Pieces-Other-General-Trim

Chris Burns
02-14-2013, 11:16 AM
Thanks Kenny! I sent him a PM.

galbiati
02-14-2013, 11:42 AM
Send a PM to Uhhair. He just stripped a D with grey interior. http://dmctalk.org/showthread.php?6117-Grey-Interior-Trim-Pieces-Other-General-Trim

I actually bought those 2 one was broken in half though. So I am also still looking for a driver side sunvisor that is not broken in gray.

lazabby
02-16-2013, 09:02 AM
I actually bought those 2 one was broken in half though. So I am also still looking for a driver side sunvisor that is not broken in gray.

Aren't all sunvisrs in gray? I have one that I bought from DMCH that I didn't use because the gray material was on the wrong side.

Dangermouse
02-18-2013, 08:42 PM
Mine, at least, is black.

OverlandMan
02-19-2013, 10:15 AM
Aren't all sunvisrs in gray? I have one that I bought from DMCH that I didn't use because the gray material was on the wrong side.

According to DMCH's parts store, they sell 2 different colors: light grey and dark grey.

16708

kajcienski
02-19-2013, 10:41 AM
On my '83, the material is on the "non-showing" side and the vacu-form plastic is on the showing side. The only ones left at DMCH are the early styles (I assume) with that reversed. The problem with the fabric on the showing side is the original fabric won't match the new headliner fabric, and from what I have seen, the old NOS sunvisor fabric can be discolored or tattered. Since it is vacu-form, it is extremely difficult to repair and swap in new fabric. I managed to do so but couldn't get the seam between the plastic and fabric looking like the original. However you can't see it when it is flipped up in the normal resting position. I have wanted to see if I could just get them re-apulstered with vinyl on both sides but have not checked into it.