PDA

View Full Version : What's the best way to Remove Powder Coat Fast with Stripper



1batt4u
02-18-2013, 07:31 PM
Hi all,

What is the best paint/powder coat stripper/dissolver to use to remove powder coat?

I have a bunch of stuff that really need to have the powder coat removed.

sdg3205
02-18-2013, 07:40 PM
Billy,

I think you need to dunk them in a tank. Metal cleaning facilities are best for this. They do batch dunks and its quite cheap given the volume.

Kenny_Z
02-18-2013, 08:33 PM
This might do it but if you have a lot of stuff then Sdg's suggestion is the best course. http://www.eastwood.com/ew-paint-and-powder-stripper-qt.html

1batt4u
02-18-2013, 08:38 PM
This might do it but if you have a lot of stuff then Sdg's suggestion is the best course. http://www.eastwood.com/ew-paint-and-powder-stripper-qt.html

I saw online people recommending Eastwood's product.

Have you used it?

Kenny_Z
02-18-2013, 09:00 PM
I haven't used that product but I have used a lot of their products without complaints.

1batt4u
02-19-2013, 05:31 PM
I haven't used that product but I have used a lot of their products without complaints.

Thank you!

thirdmanj
02-20-2013, 09:21 AM
I've had pretty good luck with sand-blasting.