Log in

View Full Version : Frame & Body Can't get the 3M Rear-view mirror pad to stick!



DrJeff
03-12-2013, 11:05 PM
This should have been easy. Clean (with alcohol), peel, stick... problem is the sticky pad keeps coming off the window :banghead:

I got the right 3M pad from DMCH, and yes I know - don't use glue. The pad seems to stick well enough but the minute I adjust the mirror the pad releases from the glass. It was in the mid-70s today when I attached it.

Any ideas?

Patrick C
03-12-2013, 11:18 PM
I used this when I mounted my mirror. Works great, no vibrations when driving as some feared when using this product.

http://www.walmart.com/ip/3M-Scotch-Mount-Molding-Tape/17130303

Farrar
03-12-2013, 11:25 PM
Was it humid outside? Perhaps humidity affected the tape.

Also, try acetone instead of alcohol (on the glass only -- it'll take the paint off the mirror mount). I used that and 3M emblem tape and it's held fine for a couple of years so far.

DMCMW Dave
03-12-2013, 11:48 PM
Was it humid outside? Perhaps humidity affected the tape.

Also, try acetone instead of alcohol (on the glass only -- it'll take the paint off the mirror mount). I used that and 3M emblem tape and it's held fine for a couple of years so far.

Alcohol probably doesn't dry fast enough. We generally clean and then a final wipe with some laquer thinner or acetone.

DrJeff
03-13-2013, 01:05 AM
I don't think it was the alcohol as i left it to dry for a good while. I'm wondering if the pads have a stick-on by date? Mine has been sitting in the garage for a few months. I'll try again tomorrow but if that fails I'll go to the 3M grey mounting tape method.

darylfelsberg
03-13-2013, 01:48 AM
I just put mine up with 3M tape with the red backing and its held so far. I trust it won't last long,but seems to be ok. Don't try to tell the auto parts guy at your local auto parts store, you can't use glue, he'll lose his sh&t on you.

r00b
03-13-2013, 10:23 PM
I had the same thing happen, I then went with the 3M tape and It hasn't fallen off since.