Log in

View Full Version : Radiator Size



DreamerDog
03-16-2013, 03:04 PM
Hi Everyone. Just wondering if someone can let me know the radiator overall size and the core size for an 82? I have no clue on these cars, my husband is into these cars, but needs a new radiator. Needs a radiator period :) None in his car. A "friend" has one but I want to make sure it is the correct one and the best way is to measure the core and overall size, this is what I was told. I don't have the funds to purchase a new one from DeLorean parts specialist, so this is my option. Want to suprise hubby, but need some help. So if anyone can get me the length, height and width, (overall and core size) it would be most appreciated :)

Thanks so much in advance. Sorry for my lack of knowledge :(

Bitsyncmaster
03-16-2013, 03:10 PM
You would need the correct inlet and outlet locations and sizes also. I would suggest you save enough to buy a new or used one for the D. There are probably a lot of used ones if you ask.

Rich
03-16-2013, 03:24 PM
Agreeing with Dave.

No, I don't have the dimensions you seek. That's a nice thing you want to do for your husband.

Look at the vendors again as a first/best option. Second option would be to post up on this site in the For Sale/Want To Buy - Parts section of this forum under "Want To Buy - Radiator" as a new thread topic and see if anybody comes up with anything decent for you.

A third option would be to get the old one rebuilt. Not sure it will be cheaper than ordering one. And it might be less reliable.

Am unaware of any "stock-size-cheap" radiator that could fit this car - or any car. Even if somebody tells you the core size is that going to be enough? The core size is just one of many factors that will make it fit and work properly.

The DeLorean cooling system is tricky enough that one doesn't want to cut corners on a vital part of it like the radiator.

PS: For reference the price for a 2004 Honda Accord radiator shows something over $200 for OEM part. The D's radiator isn't exotic or overpriced.

Soundkillr
03-16-2013, 06:38 PM
Lol, I have a 3 core radiator ill sell you! :) I just posted it in the for sale section....

Shep
03-16-2013, 11:29 PM
Lol, I have a 3 core radiator ill sell you! :) I just posted it in the for sale section....[Link to Soundkillr's radiator for sale (http://dmctalk.org/showthread.php?6546-3-core-brass-radiator-170-plus-shipping)]

If that doesn't work out for whatever reason, I still have my old one in my garage. It's no good (hence "old"), but I can still provide the measurements. Let me know and I'll post 'em here :thumbup:

Josh
03-17-2013, 01:01 AM
I too would like the dimensions of the radiator! Soundkillr, could you measure it quick? LxWxD and inlet/outlet size?

To the OP, putting in a non D rad will probably require modification of the mounting points, may the tubing as well. If your car is stock and running the PRV engine it probably will be more economical buying a used or even new rad from dmc.

As for me, I am speculating an engine swap so I would like to use an aftermarket rad anyway!

TTait
03-17-2013, 02:25 AM
Another option is to get your hands on a used Delorean Radiator in any condition and take it to a real old time radiator shop. If the core is no good, they can replace it. If the tanks are are shot, they can generally make up new ones if they have to, although that is the test of a good shop.

If this sounds at all like an option, gather up photos of Delorean radiators online, and go visit a couple radiator shops and see what the various options would cost you, assuming you can provide an authentic radiator to use as reference.

This may or may not work out cheaper for you, but it may be worth a try. Do keep in mind though that a failed radiator can cost you an entire engine, or worse. Just having your support is a wonderful gift for a D owner. It may take a while to get the car on the road and reliable, but knowing you support the project is invaluable in itself.

A final suggestion, maybe you can afford the radiator, if you don't have to pay for the labor to put it in. Its a pain in the butt to do it in the garage, by yourself, the very first time. If the two of you installed it together though... its a lot more doable. Instructions and support are available, having a second pair of hands is really the key though.

Shep
03-17-2013, 09:32 PM
I too would like the dimensions of the radiator!Here you go! (Click any of the images for huge full size)

From outer edges of length (start):
http://vin559.com/images/original_parts/radiator/resized/radiator01_640.jpg (http://vin559.com/images/original_parts/radiator/radiator01.jpg)

From outer edges of length (end):
http://vin559.com/images/original_parts/radiator/resized/radiator02_640.jpg (http://vin559.com/images/original_parts/radiator/radiator02.jpg)

From inner edges of length (start):
http://vin559.com/images/original_parts/radiator/resized/radiator03_640.jpg (http://vin559.com/images/original_parts/radiator/radiator03.jpg)

From inner edges of length (end):
http://vin559.com/images/original_parts/radiator/resized/radiator04_640.jpg (http://vin559.com/images/original_parts/radiator/radiator04.jpg)

Inlet 1 size:
http://vin559.com/images/original_parts/radiator/resized/radiator05_640.jpg (http://vin559.com/images/original_parts/radiator/radiator05.jpg)

Inlet 2 size:
http://vin559.com/images/original_parts/radiator/resized/radiator06_640.jpg (http://vin559.com/images/original_parts/radiator/radiator06.jpg)

From edge of height (start):
http://vin559.com/images/original_parts/radiator/resized/radiator07_640.jpg (http://vin559.com/images/original_parts/radiator/radiator07.jpg)

From edge of height (end):
http://vin559.com/images/original_parts/radiator/resized/radiator08_640.jpg (http://vin559.com/images/original_parts/radiator/radiator08.jpg)

Depth:
http://vin559.com/images/original_parts/radiator/resized/radiator09_640.jpg (http://vin559.com/images/original_parts/radiator/radiator09.jpg)

This is the original, 32-year-old OEM radiator that my DeLorean left the factory with. Let me know if I measured wrong or if you need any more! :thumbup:

Josh
03-19-2013, 03:50 AM
Thank you so much Shep! I really owe you one!

Josh

Josh
03-19-2013, 04:03 AM
So thanks to Shep the Delorean rad dimensions are 12.25 x 30.5

Some candidates are (neglecting mounting)

1984-2001 Jeep Cherokee (XJ) 11.625 x 36.5

1989-1993 Ford Mustang 5.0 12.5 x 31.625

I neglected thickness because depending on the type of rad you get, the thickness will vary.

"What The Flux?"
02-21-2026, 06:59 AM
Here you go! (Click any of the images for huge full size)

From outer edges of length (start):
http://vin559.com/images/original_parts/radiator/resized/radiator01_640.jpg (http://vin559.com/images/original_parts/radiator/radiator01.jpg)

From outer edges of length (end):
http://vin559.com/images/original_parts/radiator/resized/radiator02_640.jpg (http://vin559.com/images/original_parts/radiator/radiator02.jpg)

From inner edges of length (start):
http://vin559.com/images/original_parts/radiator/resized/radiator03_640.jpg (http://vin559.com/images/original_parts/radiator/radiator03.jpg)

From inner edges of length (end):
http://vin559.com/images/original_parts/radiator/resized/radiator04_640.jpg (http://vin559.com/images/original_parts/radiator/radiator04.jpg)

Inlet 1 size:
http://vin559.com/images/original_parts/radiator/resized/radiator05_640.jpg (http://vin559.com/images/original_parts/radiator/radiator05.jpg)

Inlet 2 size:
http://vin559.com/images/original_parts/radiator/resized/radiator06_640.jpg (http://vin559.com/images/original_parts/radiator/radiator06.jpg)

From edge of height (start):
http://vin559.com/images/original_parts/radiator/resized/radiator07_640.jpg (http://vin559.com/images/original_parts/radiator/radiator07.jpg)

From edge of height (end):
http://vin559.com/images/original_parts/radiator/resized/radiator08_640.jpg (http://vin559.com/images/original_parts/radiator/radiator08.jpg)

Depth:
http://vin559.com/images/original_parts/radiator/resized/radiator09_640.jpg (http://vin559.com/images/original_parts/radiator/radiator09.jpg)

This is the original, 32-year-old OEM radiator that my DeLorean left the factory with. Let me know if I measured wrong or if you need any more! :thumbup:

I know this is a 13 year old post and the website hosting the images is long gone, but I was wondering if anyone captured this useful data please?

Josh
02-25-2026, 01:57 PM
I know this is a 13 year old post and the website hosting the images is long gone, but I was wondering if anyone captured this useful data please?

I have a CAD model of the radiator if that would be helpful to you? let me know.