View Full Version : Engine The 2 engine Belts correct?
1batt4u
03-16-2013, 08:25 PM
I was wondering if the 2 belts on the engine are supposed to be different in size(width) other than length?
One is 10mm wide and the other 13mm wide. I haven't paid attention to it until now, since my car is still under work and haven't installed them.
http://i50.tinypic.com/opo7f7.jpg
The first belt I got was from John Hervey when I bought the alternator from him. Which I also used while designing the billet pulleys I am working on.
Here is the thinner 10mm belt. I take it this belt goes around the back of the crank pulley, water pump, and the alternator.
http://i50.tinypic.com/erx4ls.jpg
I got this belt, 13mm much later. I guess it goes the front of the crank pulley, a/c idler pulleys and A/C compressor pulley
http://i46.tinypic.com/353cd5c.jpg
It does not fit snug on the a/c idler pulleys.
Is all this correct??
jawn101
03-16-2013, 09:44 PM
I was wondering if the 2 belts on the engine are supposed to be different in size(width) other than length?
One is 10mm wide and the other 13mm wide. I haven't paid attention to it until now, since my car is still under work and haven't installed them.
http://i50.tinypic.com/opo7f7.jpg
The first belt I got was from John Hervey when I bought the alternator from him. Which I also used while designing the billet pulleys I am working on.
Here is the thinner 10mm belt. I take it this belt goes around the back of the crank pulley, water pump, and the alternator.
http://i50.tinypic.com/erx4ls.jpg
I got this belt, 13mm much later. I guess it goes the front of the crank pulley, a/c idler pulleys and A/C compressor pulley
http://i46.tinypic.com/353cd5c.jpg
It does not fit snug on the a/c idler pulleys.
Is all this correct??
I have an 11AV1230 on my Hervey alternator and 13AV1345 on the A/C. I got a slightly shorter belt for the alternator because I found I could not tension it properly with the 1260 he supplied.
Keep in mind that the belt doesn't wrap around those idler pulleys - it just sort of rests on top of them.
1batt4u
03-17-2013, 03:05 PM
Ok Cool! Thanx for the info.
ZX-14
03-17-2013, 03:58 PM
I have an 11AV1230 on my Hervey alternator and 13AV1345 on the A/C. I got a slightly shorter belt for the alternator because I found I could not tension it properly with the 1260 he supplied.
Keep in mind that the belt doesn't wrap around those idler pulleys - it just sort of rests on top of them.
I have a new alternator and belt from special T, the belt that came with the alternator keeps slipping when the AC is turned on.
Saw the white smoke and smelled the burning belt. It always seems to losen after I tighten the tensioner bolt.
What's the better/shorter belt to run so that this doesn't continue?
jawn101
03-17-2013, 04:33 PM
I have a new alternator and belt from special T, the belt that came with the alternator keeps slipping when the AC is turned on.
Saw the white smoke and smelled the burning belt. It always seems to losen after I tighten the tensioner bolt.
What's the better/shorter belt to run so that this doesn't continue?
Like I said, the 11A1230 worked great for me. The 1260 he provided was too long and couldn't be tensioned properly.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.