Log in

View Full Version : Engine Name this part?



DrJeff
04-07-2013, 03:42 PM
Anyone know what this is? It sits just above and to the RH side of the clutch slave.

1800618007

The first photo shows a coolant pipe to the RH side of the clutch slave cylinder (the shinny part). The second photo shows the part I'm trying to identify. It shows as slightly wet in this photo. I think it is coolant related and may be leaking a little. I gave it an almighty shove when I was putting the clutch cylinder into place.

krs09
04-07-2013, 03:46 PM
Anyone know what this is? It sits just above and to the RH side of the clutch slave.

1800618007

The first photo shows a coolant pipe to the RH side of the clutch slave cylinder (the shinny part). The second photo shows the part I'm trying to identify. It shows as slightly wet in this photo. I think it is coolant related and may be leaking a little. I gave it an almighty shove when I was putting the clutch cylinder into place.

Looks like your hot water valve #100763.. I think.

DrJeff
04-07-2013, 05:13 PM
18006

Any ideas what pipe this is just above the clutch slave?

DrJeff
04-07-2013, 05:16 PM
Looks like your hot water valve #100763.. I think.

Thanks krs09. I'm guessing I stressed the joints and some coolant came free. From the pictures on Store.Delorean.Com is looks like the connector on one side is metal (so unlikely to break there), but the connection on the other side looks like it houses the valve mechanism itself.

deloumis
04-07-2013, 05:56 PM
Thanks krs09. I'm guessing I stressed the joints and some coolant came free. From the pictures on Store.Delorean.Com is looks like the connector on one side is metal (so unlikely to break there), but the connection on the other side looks like it houses the valve mechanism itself.

Your better off replacing if its original. You can run down to the auto parts store and purchase a replacement, I believe there's a few different which you can choose from.

DMC5180
04-07-2013, 06:13 PM
Any ideas what pipe this is just above the clutch slave?


It the connection of the Heater core Return hose to the VOD Return Pipe. It eventually connects to the back of the water pump housing. If your referring to the aluminum piece in the back ground. That's the Intake manifold.