View Full Version : Frame & Body Sun Visor Droop
wrkey
05-01-2013, 01:15 PM
My car was sitting in a hot Texas storage unit for the last 6 years and the sun visors now droop on the outer ends. Kinda looks like a half moon shape but not quite so extreme. I'm wondering if anyone else had this problem and were you able to fix it? I know replacement is an option, just finding the right ones with the right colors is the trick. But I was thinking i would try to find a way to 'fix them'.
If anyone has a photo of what is inside these visors it would great if you could post them here. If they are some type of plastic or foam or other material that is sensitive to heat then perhaps I could lay them out and heat them up to put them back to the original flat shape. Another option would be to put a flat piece of stiff material inside (or perhaps outside) of the visor to hold it in shape.
Thoughts, ideas?
Thanks in advance!
kajcienski
05-01-2013, 02:23 PM
From what I recall, the visors are made of a dense foam, almost like a surf board material. I would suggest using heat as the vinyl is vacu-formed over it with the material at the same time. They cannot be taken apart and put back together without really ruining it.
john 05141
05-02-2013, 08:03 AM
I'm tall, so my head is inside the doorroof panels.
I removed the sunvisors becasue I have a much clearer view forward.
Saldom I miss them.
DeloreanJoshQ
05-02-2013, 08:19 AM
My car was sitting in a hot Texas storage unit for the last 6 years and the sun visors now droop on the outer ends. Kinda looks like a half moon shape but not quite so extreme. I'm wondering if anyone else had this problem and were you able to fix it? I know replacement is an option, just finding the right ones with the right colors is the trick. But I was thinking i would try to find a way to 'fix them'.
If anyone has a photo of what is inside these visors it would great if you could post them here. If they are some type of plastic or foam or other material that is sensitive to heat then perhaps I could lay them out and heat them up to put them back to the original flat shape. Another option would be to put a flat piece of stiff material inside (or perhaps outside) of the visor to hold it in shape.
Thoughts, ideas?
Thanks in advance!
My passenger side does this same thing. They are no longer available.
The only solution is to have an upholstery shop install some stiffening bracing into them or cut it open yourself and do it.
Jonathan
05-02-2013, 09:14 AM
...to put them back to the original flat shape.
Do you have a picture of your visors that you could post?
I know on some of the cars I have seen, including mine, the visors don't stay flat while they are in the up position. The outside end tends to bend a bit to contour to the shape of the headliner/A-pillar. It sounds like yours got a bit more dramatic after being in the up position for years in the heat of the summer. Do they bend down at these corners away from the headliner when up (and remain in contact with the contour of the headliner)? Or is it noticeable this bend only when you flip them down for use?
Could they be flipped over and installed driver into passenger and passenger into driver? And then while staying up they might bend themselves right again? Your colour scheme on the two sides might not match what your VIN should have had, but that doesn't really matter.
dmc6960
05-02-2013, 12:09 PM
I always keep my visors flipped all the way forward against the windshield. Improves the interior appearance dramatically, and counteracts the natural bow they develop.
wrkey
05-09-2013, 10:35 AM
I always keep my visors flipped all the way forward against the windshield. Improves the interior appearance dramatically, and counteracts the natural bow they develop.
Gentleman Jim was right on with this suggestion. I flipped them forward and that 'pushed' the droop out. Also, the color now matches the rest of the interior, gives me a larger view. After about 3 days the droop is gone.
You da man!
bunni
05-09-2013, 07:25 PM
I just always assumed forward was the intended home position of them...
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.