Re-grounding the Center Console bracket

[DrJeff]

I want to provide a better ground connection for the center console. If I run a new ground cable from the console bracket ground connection, where is the best place to run it to? (I'm guessing the fuse box area, but I can't see any easily accessible grounding points?

[Ron]

FWIW, I think Bill ran his all the way to the main grounding point at the Bulkhead...

I assume you've seen his ground buss schematic?

[DrJeff]

FWIW, I think Bill ran his all the way to the main grounding point at the Bulkhead...

I assume you've seen his ground buss schematic?

I've seen the schematic (just looked at it). I just don't know where the bulkhead bolt is?

[Bitsyncmaster]

You could use the frame ground like I did for the inertia switch. The frame ground is pretty good for most everything.

[Ron]

You could use the frame ground like I did for the inertia switch. The frame ground is pretty good for most everything. Better yet -- Gets my vote!

[DrJeff]

Better yet -- Gets my vote!

Where is the frame ground?

[Ron]

Behind the AC Duct, IIRC.

19014

[Bitsyncmaster]

Where is the frame ground?

I used a lug under the shifter gimbal hold down screw.

[DrJeff]

Okay, I went with running a cable to the bulkhead bolt. I had the center channel clear so it was an easy run. Thanks guys.