PDA

View Full Version : Frame & Body Front bumper - foam inner structure repair options?



Kenny_Z
05-18-2013, 12:17 PM
The foam inner structure behind my front fascia isn't in horrible shape. The only trouble spot is over the driver turn signal. I'm just looking to repair the area. I can't see spending nearly 700 dollars on that part.

Is there a common fix for this? I've considered both black duct tape and fiberglassing the repair. I'm not sure how the fiberglass catalyst will react on the foam though. I don't want to melt it. Will duct tape be enough to seal moisture out of the foam or is that not even a concern?

http://uploads.m-cgi.com/kennyz/Delorean/Projects/misc008.jpg

David T
05-18-2013, 12:35 PM
Remove all of the loose and damaged foam. Make a simple form out of cardboard oversize. Spray with expanding spray foam. Let harden and shape with a saw.
David Teitelbaum

Kenny_Z
05-18-2013, 11:23 PM
Cool, sounds easy enough. I'll tackle that this week. Thanks for the information.

LEVY
05-18-2013, 11:32 PM
Cool, sounds easy enough. I'll tackle that this week. Thanks for the information.

Some people use plastic then carboard, you can leave the plastic on.

LEVY

Spittybug
05-19-2013, 11:06 AM
I concur. If you line your mold with saran wrap, the foam will be protected from moisture better. A long time ago I actually sealed up my foam bumper with a spray type of plastic paint. It didn't bond overly well, but if left undisturbed, it adds a level of moisture protection.

David T
05-19-2013, 01:07 PM
The way you do it in part is determined by how you need it to appear when finished. If all you are trying to do is replace missing chunks it really doesn't matter all that much. If you make it oversize and trim it, the surface finish is irrelevant. The foam is not seen anyway and is only there to support the bumper and absorb energy in the event of a frontal crash. When using expanding foam it is very hard to be neat.
David Teitelbaum

vwdmc16
05-20-2013, 03:37 AM
I sanded off the loose plastic coating on mine and coated with Plasti-Dip. It didnt adhere super well but after 4 years its still holding up.

jawn101
05-20-2013, 11:23 AM
What about this stuff, anyone tried it? http://www.getflexseal.com/ - or is it just Plasti-Dip with a pitchman?

I mean come on, that guy made a boat out of a screen door with it. I saw it on TV so it must be true.

Kenny_Z
05-20-2013, 07:37 PM
I've got a can of plasti-dip from another project so I was planning on using it to seal any repairs. I'm more worried about moisture than anything else. Red lives outside and this is a very humid region. I was going to tackle this project today but I managed to buy a damaged can of expanding foam because I'm just that lucky. The trigger is broken and missing.