PDA

View Full Version : General Stainless Steel 3M Wrap for front and rear?



OutOfTime
05-23-2013, 02:21 PM
Has anyone tried wrapping the front and rear painted areas in some type of 3M wrap?

http://www.metrorestyling.com/3M-Scotchprint-1080-Brushed-Steel-Vinyl-Wrap-p/3m1080-br201.htm

I know the 'factory' is painted darker grey, but I wouldnt mind trying to get a cleaner look. Here is a Youtube Video where they wrapped an entire BMW 1 series

http://www.youtube.com/watch?v=0ZqVSSotgHY

Just wondering if anyone has tried this yet, or might I be the first?

Mark D
05-23-2013, 03:05 PM
Sounds like you would probably be the first to wrap a fascia. It bet it would look pretty cool as long as you could keep the grain straight and cut around the black bumper section with a clean edge. I'm not sure how it would compare butted up to actual stainless steel, but by itself it looks like good stuff.

I used a similar material a while back to make some rear window stickers for my daily driver:

http://dmctalk.org/attachment.php?attachmentid=19211&d=1369332217
http://dmctalk.org/attachment.php?attachmentid=19212&d=1369332224

OutOfTime
05-23-2013, 03:14 PM
Yah the product looks pretty good. I might give it a try when I get around to that part of the restoration.

dmcjohn
05-23-2013, 07:48 PM
That is a great idea. I saw a delorean on eBay recently and was wondering how the bumpers matched the body so well, until I realized the whole car had been painted grey.

19220

It looks really good when the fascias are blended with the rest of the body imo.

John

Ryan S.
05-23-2013, 10:18 PM
Nice find. Would aluminum be a better match vs. brushed steel for our cars? Someday, I would try this instead of repainting my facias. Plus, it's reversible.

pezzonovante88
05-23-2013, 10:29 PM
I really like this idea. How did I not think of this?
Personally, I wouldn't try to "match" the wrap with the stainless because I like the old-school contrast look. But, it's a great (reversible) alternative to re-painting one's fascias.

Rich W
05-24-2013, 07:22 AM
This sounds like a job for Randal Brown, 3M guy.

Maybe some samples at DCS 2014?


Has anyone tried wrapping the front and rear painted areas in some type of 3M wrap?

http://www.metrorestyling.com/3M-Scotchprint-1080-Brushed-Steel-Vinyl-Wrap-p/3m1080-br201.htm

Just wondering if anyone has tried this yet, or might I be the first?

Farrar
05-24-2013, 07:06 PM
I was actually thinking of using a vinyl wrap instead of re-painting. Not brushed metallic look for my taste, though -- 3M has some dark metallic silver options which look pretty close to the paint. But as someone already said, trimming around the black would be tricky.

SoCalDMC12
05-25-2013, 02:14 AM
I tried this last year. Semi-satisfied with the results. On flat areas it looks great. But when going around curves, or in tight areas (like the inset headlight areas) it ended up looking a bit wonky because I had to piece together smaller pieces of the material... this results in interruptions in the grain. Might try to redo it at some point to clean things up.

SoCalDMC12
05-25-2013, 02:55 AM
Pix... from a few paces away you can still see some seams, but it looks OK. Up close, the grain gets wonky. I still think it looks pretty cool, though.

Nuclearbacon
10-15-2013, 09:43 PM
That does look pretty cool! I like the front end especially. Looks good!!

john 05141
10-16-2013, 04:10 AM
I like that!!
Can this be done while still attached to the car?
What is the price comparisson to painting the facia's?

Jan

bxtech
12-28-2014, 10:37 PM
I know this is an old thread. This 3M SS wrap looks like some nice stuff. Has anyone wrapped their car in it? How realistic does it look compared to the real Stainless Steel? It's hard to tell exactly from the pictures. I'm thinking of wrapping my complete car in it since mine is painted. I'd hate to buy the material and the brushed finish ends up looking cheezy.

Patrick C
12-30-2014, 07:57 PM
It might be nice to have the wide DMC side stripe made in this brushed vinyl...

waxhead
01-01-2015, 07:54 PM
Pix... from a few paces away you can still see some seams, but it looks OK. Up close, the grain gets wonky. I still think it looks pretty cool, though.

That looks really nice! It always bothered me that the fascias were painted a darker grey. If (when) I get my DeLorean, I will definitely look into this.


Sent from my iPad using Tapatalk

SS Spoiler
01-01-2015, 08:57 PM
Painting both front and rear end caps black looks good. It is a nice contrast to the stainless. The off grey color always looked like you couldn't
match the brushed stainless.

Outdoor_funguy
11-11-2016, 06:12 AM
"You might want to visit gatorprints (https://gatorprints.com/3m-vinyl-wrap/), you can request for a quote plus they have a lot of vinyl wraps with lots of colors to choose from.
Brushed Steel (BR201 (https://gatorprints.com/shop/3m-wrap-vinyl/60-3m-1080-brushed-steel-br201/))"

Michael
11-11-2016, 11:02 AM
I have often thought that would look good but I wouldn't carry it to the headlight and tail light recesses.

flux3d
11-12-2016, 07:22 AM
Looking good SoCal. Always nice to see pictures of my cars sister/brother. :) Would love to see more.

There is the technique of using a transfer which is applied using a water bath. Water Transfer Printing or hydrographics. This would probably be the perfect technique for our complex front and back ends. Might look into it. You'd need a large bath to do our bumpers/fenders.

https://www.youtube.com/watch?v=pKuXyeAGzEU

Michael Babb
11-12-2016, 12:05 PM
There is a wire tape that can be used to help ensure that you have vinyl seams that do not overlap and are completely flush:

I like the idea of doing a stainless wrap. I have both of mine off for painting...may have to give this a try first. :)

https://www.youtube.com/watch?v=WZTDIMbBv1Q