PDA

View Full Version : How to replace stud on front spoiler



1batt4u
05-30-2013, 02:14 PM
Was wondering how to replace studs on front spoiler? Mine broke off on both sides while removing spoiler.

19334

Kenny_Z
05-30-2013, 02:27 PM
I removed the leftover T and then drilled a hole where the old bolt was. Then I just epoxied a stainless bolt in place. Not the most elegant solution but it will work and not require any special T bolt purchases.

DMCMW Dave
05-30-2013, 02:36 PM
Drill it out and use a bolt. They are all accessible from the back side.

Mark D
05-30-2013, 03:25 PM
Drill it out and use a bolt. They are all accessible from the back side.

Yup, this was what I did also. I'm not sure why they are even studs in the first place, they're all pretty easy to get to from the back side.