PDA

View Full Version : General Help with towing



bdmiko
06-17-2013, 10:20 PM
After 17 years of being parked in a garage, I am getting ready to bring my DeLorean back to life. I'm not a master mechanic but have done some basic car repairs over the years. Reading through the forums has given me a pretty good idea idea of what needs to be done, new rubber hoses, rubber seals, clean the fuel system, etc.

However my first task is to tow the car to its new home, about 35 miles. My plan is to have it towed on a flatbed. Is there anything that I need to be aware of when I hire a tow truck? Right now the frame is in great condition and the epoxy coating is also in good shape. What is the best way to load the car onto the truck without damaging it?

Thanks
David

DMCMW Dave
06-17-2013, 10:31 PM
Facing forward.
Use the factory row hooks with cloth ratchet straps. Avoid chains.

dvonk
06-17-2013, 10:33 PM
congratulations, and welcome to the forum! :wave:

you may find Domi's scan of this original Transporters Hand Book (http://dmctalk.org/showthread.php?3619-Transporters-Hand-Book) of interest! :hihi2:

bdmiko
06-18-2013, 12:25 AM
Thank you for the information and the fast replies. Just what I needed.

wrkey
06-18-2013, 11:03 AM
Make sure it rides nose first! You don't want to rip off the louvers by letting it ride backwards!

bdmiko
07-05-2013, 09:43 AM
To protect the enamel I ended up getting a set of chain quick links. Sliced some fuel line tubing and then duct taped it on to one side of the link. Seemed to work well.

20353