PDA

View Full Version : General Fuel Accumulator



NightFlyer
06-29-2013, 10:25 PM
Hey guys,

I'm getting ready to tackle a fuel accumulator change for the first time ever during my tenure of ownership (I've been living with a minor hot start issue for the last 10 years) and had a few questions that I'm hoping you could help answer.

First off, I noticed that most of the vendors are currently selling a much smaller unit than what originally came with the car. Unhappy with this, I ordered the accumulator from Summit Racing, Bosch 0438170029, for $114.97 and a free shipping promotion. Others can find the same here:

http://www.summitracing.com/parts/bch-0438170029

Am I right in that this part is the OEM style / full size accumulator, as opposed to the shorty that most of the vendors are currently selling?

Also, I noticed that the vendors sell their accumulators in a kit form, together with an accumulator sock/mounting pad, hoses, and hose clamps. Do I really need to change the hoses when changing the accumulator, or can I reuse what's already there?

Any tips or advice you can offer, I'd greatly appreciate!

Thanks!

Delorean Industries
06-29-2013, 10:34 PM
Hey guys,

I'm getting ready to tackle a fuel accumulator change for the first time ever during my tenure of ownership (I've been living with a minor hot start issue for the last 10 years) and had a few questions that I'm hoping you could help answer.

First off, I noticed that most of the vendors are currently selling a much smaller unit than what originally came with the car. Unhappy with this, I ordered the accumulator from Summit Racing, Bosch 0438170029, for $114.97 and a free shipping promotion. Others can find the same here:

http://www.summitracing.com/parts/bch-0438170029

Am I right in that this part is the OEM style / full size accumulator, as opposed to the shorty that most of the vendors are currently selling?

Also, I noticed that the vendors sell their accumulators in a kit form, together with an accumulator sock/mounting pad, hoses, and hose clamps. Do I really need to change the hoses when changing the accumulator, or can I reuse what's already there?

Any tips or advice you can offer, I'd greatly appreciate!

Thanks!
This is where we get ours from. As posted on other threads here regarding this we are the last vendor to be using the full size option at this time.

NightFlyer
06-29-2013, 10:52 PM
This is where we get ours from. As posted on other threads here regarding this we are the last vendor to be using the full size option at this time.

Josh - Do you resell this part at all, or is it only offered for work performed in shop, as I know that you've also previously expressed concern about not becoming a mere volume parts slinger?

You really need a website that displays all of your parts offerings :biggrin:

Delorean Industries
06-29-2013, 11:01 PM
Lol how did I word the parts slinger thing? I'm about quality over quantity here and that is probably what I was hinting towards. I like to avoid slinging Chinese and or untested crap.

I will look and see if I have any in stock first thing tomorrow. If not summit only takes a day normally for a tech accounts.

David T
06-29-2013, 11:52 PM
All you really need is the accumulator. If you don't damage things you can reuse it all (except the accumulator of course!) unless soemthing is missing or so rusted it can't be reused. If the short rubber hose is badly cracked you may want to replace it. Whatever you do DO NOT damage, kink, bend, or otherwise mess up the hard lines. Use two wrenches and "hold back" so you don't twist or kink those lines. If the accumulator is bad you may want to replace the fuel filter soon. All of the chunks of the rubber diaphragm are stuck inside. Drive the car a little to make sure they are all caught in there and you have no fuel leaks.
David Teitelbaum

NightFlyer
06-30-2013, 12:00 AM
Lol how did I word the parts slinger thing? I'm about quality over quantity here and that is probably what I was hinting towards. I like to avoid slinging Chinese and or untested crap.

Took me a while to find this, but I was determined so as to convince myself that I'm not going crazy and starting to make stuff up:

http://dmctalk.org/showthread.php?5590-Amateur-DIY-auto-mechanics-a-dying-breed&p=79887#post79887


But slinging parts is a PITA with very small margins these days and I'm more concerned with my staff restoring cars so it will be interesting to see where things go. *** Even we are guilty of it at DPI. Windshields, doors, anything engine related minus an exhaust system, clutches and flywheels, brakes and our new frames are in house only.

Thus, I didn't even think of inquiring with you when it came time to order an accumulator and other parts for my car's wake-up from winter hibernation, as I didn't think that you were interested in 'the volume slinging of parts,' as it's a "PITA with very small margins these days."


I will look and see if I have any in stock first thing tomorrow. If not summit only takes a day normally for a tech accounts.

I already ordered through and paid Summit Racing, so unless I can somehow cancel the order and get my money back, I'm afraid it might be a little too late. But if it is possible, I would be interested in ordering from you instead, as 1) it's supporting a DeLorean vendor, and 2) it sounds like you can get me the part much faster than Summit, who gave me an estimated ship date of July 8th due to it's 'special order' status.

If you're interested in filling common/replacement/wear item parts orders, I'll start checking with you first. The only reason I didn't this time is because I honestly didn't think you were interested based on your past assertions on the forum. Sorry.

NightFlyer
06-30-2013, 12:19 AM
All you really need is the accumulator. If you don't damage things you can reuse it all (except the accumulator of course!) unless soemthing is missing or so rusted it can't be reused. If the short rubber hose is badly cracked you may want to replace it. Whatever you do DO NOT damage, kink, bend, or otherwise mess up the hard lines. Use two wrenches and "hold back" so you don't twist or kink those lines. If the accumulator is bad you may want to replace the fuel filter soon. All of the chunks of the rubber diaphragm are stuck inside. Drive the car a little to make sure they are all caught in there and you have no fuel leaks.
David Teitelbaum

Thanks for the response and confirming what I thought. As all PO's and myself have taken great care in properly storing the car when not in use, all the original hoses are still in like new shape, surprisingly enough. And it's absolutely spotless in the accumulator cubby.

I just worked with some pretty fragile and heavily rusted hard lines when I flushed and changed the filter on my fuel oil tank, and so far all is good with no leaks, so I must be pretty good at it.

Fuel filter is being changed as well. I change that annually no matter what as it's a pretty quick and easy job and a low cost replacement part.

No leaks yet, so hopefully my good luck in that regard will continue :biggrin:

Delorean Industries
06-30-2013, 11:20 AM
Took me a while to find this, but I was determined so as to convince myself that I'm not going crazy and starting to make stuff up:

http://dmctalk.org/showthread.php?5590-Amateur-DIY-auto-mechanics-a-dying-breed&p=79887#post79887



Thus, I didn't even think of inquiring with you when it came time to order an accumulator and other parts for my car's wake-up from winter hibernation, as I didn't think that you were interested in 'the volume slinging of parts,' as it's a "PITA with very small margins these days."



I already ordered through and paid Summit Racing, so unless I can somehow cancel the order and get my money back, I'm afraid it might be a little too late. But if it is possible, I would be interested in ordering from you instead, as 1) it's supporting a DeLorean vendor, and 2) it sounds like you can get me the part much faster than Summit, who gave me an estimated ship date of July 8th due to it's 'special order' status.

If you're interested in filling common/replacement/wear item parts orders, I'll start checking with you first. The only reason I didn't this time is because I honestly didn't think you were interested based on your past assertions on the forum. Sorry.


It's just impossible to stay competitive with quality products. This happened again with axle boots. Othe vendors cheaped out and started selling cheap repops due to a price increase from the original supplier. To keep the price reasonable we are required to take a loss while still offering the superior product at the compatible price.

That is my pita reasoning with a specific example. Thanks for finding that btw!

Bitsyncmaster
06-30-2013, 11:53 AM
It would be interesting to compare the volume of those small accumulators with the OEM size. My guess would be less volume and therefore less time it holds rest pressure.

David T
06-30-2013, 01:39 PM
It would be interesting to compare the volume of those small accumulators with the OEM size. My guess would be less volume and therefore less time it holds rest pressure.

It may also be the case the pressure it holds is different too. It is unnecessary to replace the fuel filter every year. It seems to be large enough that there have been few reported instances where it was a problem. The most common problem besides the difficulty because the connections are so tight, sometimes you get leaks and if you don't do it right you somehow seem to plug up a connection and reduce the flow. Definitely at every tune-up or every 10 years.
David Teitelbaum

NightFlyer
06-30-2013, 02:40 PM
It's just impossible to stay competitive with quality products. This happened again with axle boots. Othe vendors cheaped out and started selling cheap repops due to a price increase from the original supplier. To keep the price reasonable we are required to take a loss while still offering the superior product at the compatible price.

That is my pita reasoning with a specific example. Thanks for finding that btw!

Speaking for myself, I'm ALWAYS willing to pay more for a quality product or one made in the USA vs an exploited outsourced nation - did you see my tire thread?

As an example, the only clothes washer/dryer that I'd even consider buying today are made by Speed Queen right here in the USA!

You don't need to take a loss to be competitive - you just need to market your offerings better.

Make sure that 1) I know that you have a product to sell me, and 2) that I know that it's of a superior quality to that which the competition is selling by providing as much detail as possible. Also, if made in the USA, Canada, or a Western European nation, make that a primary selling point.

That's why you really need a good website! While Hervey's website may be far from perfect, it's very detailed and I greatly appreciate that!

Anyway, I'm currently looking for a few other parts, so I guess I'll shoot you an email to see what you offer and if you're interested in filling the order.

NightFlyer
06-30-2013, 02:45 PM
It would be interesting to compare the volume of those small accumulators with the OEM size. My guess would be less volume and therefore less time it holds rest pressure.

There has to be a difference, otherwise they would have only made the smaller size from the onset of production and used it as the OEM application.

While I like supporting our vendors, I refuse to settle for a different/inferior product - especially if what I want is still readily available, even if it costs me more.

I wish I knew ahead of time that DPI was willing to fill orders for this kind of stuff, as I would have given my business to Josh on this part as opposed to Summit Racing.

DMC5180
06-30-2013, 08:18 PM
Can you post photo's of the two different accumulators for comparison? I was unaware of the changes in offerings.

Bitsyncmaster
06-30-2013, 08:26 PM
Back when I was having warm start problems (3 hour rest) I suggested using a larger or two accumulators. I fixed my warm start with my RPM relay design.

NightFlyer
06-30-2013, 08:33 PM
Can you post photo's of the two different accumulators for comparison? I was unaware of the changes in offerings.

Here's a pic showing the difference, courtesy of OverlandMan from the other accumulator thread - the larger of the two is the OEM size, while the smaller of the two is what every vendor other than DPI is currently offering their customers.

You can check out the other thread here: http://dmctalk.org/showthread.php?7071-fuel-accumulator

http://dmctalk.org/attachment.php?attachmentid=19002&d=1359928079

NightFlyer
06-30-2013, 08:36 PM
Back when I was having warm start problems (3 hour rest) I suggested using a larger or two accumulators. I fixed my warm start with my RPM relay design.

If my accumulator replacement doesn't solve my hot start problem, then I'll be getting your RPM relay in the near future :thumbup:

DMC5180
06-30-2013, 08:36 PM
WOW! Thanks for posting that.

NightFlyer
06-30-2013, 08:46 PM
WOW! Thanks for posting that.

The thanks goes to John U and OverlandMan - if not for the other thread and pic, I wouldn't have known about this, probably would have ordered the part from Hervey or DMCMW, and would have been super pissed off when the little stubby thing showed up in place of an OEM sized one that I would have expected.

Luckily we have this and other forums to rely upon, not to mention that this is a great example of doing thorough homework before giving a vendor your Debit/CC info.

kings1527
06-30-2013, 11:33 PM
Back when I was having warm start problems (3 hour rest) I suggested using a larger or two accumulators. I fixed my warm start with my RPM relay design.

After I worked on my engine last year, I developed a hot start problem that I think is tied into the primary pressure regulator o-ring in the fuel distributor. I was going to replace it and fix the problem but after going with your rpm relay, everything is fine. How does the saying go? 'If its working....

My car can sit for a week or 10 minutes and it'll start up within one-two seconds every time. Great design, Dave.

Totally 80s
07-01-2013, 05:15 AM
But...nobody has had any problems with the small unit? Is it all speculation that it doesn't work as well?

DeLorean03
07-01-2013, 05:53 AM
I have the smaller accumulator and plan on installing it in my car sometime this summer.

Needless to say, I was not pleased when it came in the mail. There should have been some kind of "just FYI - it got smaller" to the customers - rather than it ending up at my door and me finding out then.

NightFlyer
07-01-2013, 02:22 PM
But...nobody has had any problems with the small unit? Is it all speculation that it doesn't work as well?

Fair enough - but something has got to be different. Size definitely plays a role here in some aspect, if not merely for the ease of replace-ability.

To me, it's more about expectation and full functionality vs saving a couple bucks by settling with adequate functionality. I wanted a direct replacement size wise, expected as much, and would happily pay more for what I want as opposed to being caught by surprise by the stubby thing showing up in the mail - especially when full size units are still readily available.


I have the smaller accumulator and plan on installing it in my car sometime this summer.

Needless to say, I was not pleased when it came in the mail. There should have been some kind of "just FYI - it got smaller" to the customers - rather than it ending up at my door and me finding out then.

That's my biggest problem here - the vendors, with the sole exception of DPI, should have been upfront and forthcoming about this instead of quietly making the change and then attempting to justify it after the fact by explaining that they provide an adapter piece of hosing with the new stubby unit.

They could have given their customers a choice - similar pricing to what you're used to for the new stubby unit OR a higher price for an OEM sized unit. What would have been so wrong with that approach??? But no, instead they do a quite change over and hope no one complains. Honestly, I just don't understand this kind of customer relation tactic.

Catching people by surprise like they did with you - I'm sorry, but that just plain pisses me off. :mad2:

BIG KUDOS and PROPS go out to Josh at DPI for being OPEN and HONEST about the situation with his customers and the members of this forum - and for continuing to offer the OEM sized accumulator! Now that's a businessman and strategy that I can respect :bigclap:

Totally 80s
07-01-2013, 02:27 PM
It would be nice to have a definitive answer if they are different and if so how. It is entirely possible they work exactly the same. I know the new one is a Bosch product as well. I guess someone could call Bosch and ask.

NightFlyer
07-01-2013, 03:37 PM
It would be nice to have a definitive answer if they are different and if so how. It is entirely possible they work exactly the same. I know the new one is a Bosch product as well. I guess someone could call Bosch and ask.

Clearly, they're different in size, which if you read the other thread, makes installation of the smaller one a little more difficult. And if size doesn't affect functionality in some way, then why didn't they just use the smaller size from the onset and why does Bosch produce multiple sizes? There's an obvious difference here in functionality - it just can't be an arbitrary decision, as that wouldn't make any sense at all.

Anyone know the OEM application for the new stubby one being offered by most vendors other than DPI? If I had to guess, I'd think that a smaller one would be more appropriate for 4 cylinder applications - but that's just a guess.

Don't get me wrong - I know that the stubby one works, and I'm not disputing that. Again, to me, it's more about expectation and upfront honesty from the vendors than anything else.

Jimmyvonviggle
07-01-2013, 03:43 PM
I don't think the vendors were trying to be dishonest or hide anything, as your statements imply.

Have you called up,your vendor and asked them for the reasons for the change and how it will effect your car?

And if unsatisfied why not just send it back and ask for a refund?

thirdmanj
07-01-2013, 03:57 PM
I don't think the vendors were trying to be dishonest or hide anything, as your statements imply.

Have you called up,your vendor and asked them for the reasons for the change and how it will effect your car?

And if unsatisfied why not just send it back and ask for a refund?

Just like a Canadian, so nice and rational. Always on the bright side...

No, Jimmy. It was a conspiracy and I have the wire taps to prove it! ;)

NightFlyer
07-01-2013, 05:20 PM
I don't think the vendors were trying to be dishonest or hide anything, as your statements imply.

Have you called up,your vendor and asked them for the reasons for the change and how it will effect your car?

And if unsatisfied why not just send it back and ask for a refund?

Just so this is clear - I didn't order an accumulator from a vendor. I ordered mine from Summit Racing because I wanted a full size OEM accumulator and had previously seen the accumulator post started by John U, which can be found here:

http://dmctalk.org/showthread.php?7071-fuel-accumulator

Mr. John U, DeLorean03, and several others were apparently caught off guard by the vendors they ordered their accumulators from, as they were expecting a full sized OEM accumulator but received the stubby one in their mail boxes instead.

In the previous thread, you'll also notice how DPI Josh explained the reasoning behind the switch that the other vendors made and that the OEM sized accumulators were still readily available and that they'd be the only accumulators offered by DPI until they were discontinued and the supply had been fully exhausted. I only wish I had known that DPI filled re-sale parts orders before I ordered mine from Summit Racing.

More than anyone else, one would expect the long established vendors to realize just how eccentric many owners tend to be about their cars, myself included. In Hervey's defense, he at least has a picture of the stubby accumulator on his website (although several other pics on his site feature the full size OEM accumulator).

http://www.specialtauto.com/delorean-parts/images/delorean-accumulator.jpg

DMCH, and by association its franchisees, online store show a picture of the full size OEM accumulator, however, ordering one from them will get you the stubby accumulator as stated from experience by John U, DeLorean03, and several others.

http://store.delorean.com/images/Product/medium/100519.JPG

I'm not entirely sure what accumulator Grady is offering his customers - perhaps someone who knows could chime in on this. So, until we do know, I admit that it was premature to make the sweeping statement that 'ALL vendors other than DPI are only offering the stubby accumulator at this time.' All too often lately, Grady seems to get overlooked in discussions about vendors.

But I never implied that any vendor was attempting to be dishonest or hide anything - only that most, if not all vendors other than DPI made the change quietly and failed to directly inform their customers of such change or offer them the choice of the full size OEM accumulator for an additional cost.

That doesn't mean that I don't like Hervey or DMCH and its franchisees - only that they could have handled this situation a little better by being upfront and open about the situation, as well as maybe even providing their customers with a choice.

I hope that this explanation has clarified my position in regards to the accumulators.

Tillsy
07-01-2013, 07:17 PM
From memory the DMCH accumulator was 32 year old NOS, and it was when this exhausted they switched to the (new stock) smaller one.

DMCH still had the old one and Hervey the new one at least a year ago as this was when I purchased mine (though still haven't installed, aiming to in about a month or so).

Totally 80s
07-01-2013, 09:19 PM
Is it possible the old ones are OLD STOCK and not made anymore? The best way to find out is to call Bosch and ask what the difference is. There has to be a good reason for it. My guess is Bosch doesn't make the big ones anymore. Hervey is all about new stuff when possible. Thats his main selling point is that his stuff isn't 30 years old.

Just installed a Hervey one today. It's a bitch of a an install but I got it done. Could that hole be any smaller? I also like the two small holes on the engine side of that cubby hole. Just big enough to stick your fingers in but not big enough for your fingers to actually touch anything. LOL

NightFlyer
07-01-2013, 09:23 PM
Is it possible the old ones are OLD STOCK and not made anymore? The best way to find out is to call Bosch and ask what the difference is. There has to be a good reason for it. My guess is Bosch doesn't make the big ones anymore. Hervey is all about new stuff when possible. Thats his main selling point is that his stuff isn't 30 years old.

Just installed a Hervey one today. It's a bitch of a an install but I got it done. Could that hole be any smaller? I also like the two small holes on the engine side of that cubby hole. Just big enough to stick your fingers in but not big enough for your fingers to actually touch anything. LOL

I'll contact Bosch and see what I can find out.

NightFlyer
07-01-2013, 09:56 PM
OK, just spoke with a Bosch rep that I know personally, and here's what he had to say:

The smaller accumulator currently being offered by Hervey and DMCH & franchisees was originally engineered and designed for K-Jet applications installed on medium displacement inline 4 cylinder engines, specifically the BMW 1.8L and 2.0L M10 engine, as used on the late '70's / early '80's 318i and 320i.

The OEM sized accumulator currently being offered by DPI and found elsewhere such as Summit Racing, was originally engineered and designed for K-Jet applications installed on small displacement split bank 6 cylinder engines, such as the PRV as used on the DeLorean.

The OEM size is still on the production schedule and hasn't been discontinued as of this posting, however, the size of the production run has been significantly decreased according to what my friend told me, thus causing an increase in wholesale price, as previously mentioned by DPI Josh on the other thread.

While they perform exactly the same function, the larger size has a greater internal volume, thus resulting in the rest pressure being held for a longer period of time, thus confirming Dave M's theory on the subject.

So, there you have it - straight from a Bosch rep that was good enough to talk to and look this up for me after hours (benefits of being good friends).

I hope that this info helps whoever is interested in this subject.

Totally 80s
07-01-2013, 10:45 PM
I'll contact Bosch and see what I can find out.

Fantastic. Who knows, maybe the small one is actually better?

David T
07-01-2013, 11:00 PM
Fantastic. Who knows, maybe the small one is actually better?

With extreme wrong conditions, ie, a leaky system on a hot day, the smaller accumulator won't hold the rest pressure up long enough for the Thermo-Time switch to cool enough for the CSV to operate. That will result in a hard hot restart. My advice would be to change the RPM relay to bitmaster's so at least the fuel pump will run enough to prime the system and probably get you going.
David Teitelbaum

NightFlyer
07-01-2013, 11:06 PM
Fantastic. Who knows, maybe the small one is actually better?

I already posted the response from my friend who works for Bosch Automotive above your post.

NightFlyer
07-11-2013, 02:00 AM
Makes sense. The main reason for removing the intake manifold was for better access to the clutch slave cylinder, water pump and vacuum hoses. But while I was in there I thought it may be worthwhile to replace some more things.

Would it also make sense to replace the vacuum switch, thermistor and lambda switch?

The one thing I'd caution you on getting from a D vender is the fuel accumulator. See my previous thread regarding this:

http://dmctalk.org/showthread.php?7508-Fuel-Accumulator

DMCMW Dave
07-11-2013, 08:44 AM
The one thing I'd caution you on getting from a D vender is the fuel accumulator. See my previous thread regarding this:

http://dmctalk.org/showthread.php?7508-Fuel-Accumulator

What problems have you seen with this unit?

NightFlyer
07-11-2013, 04:13 PM
What problems have you seen with this unit?

@Dave - no problems necessarily. But according to my friend, who's a product rep for Bosch automotive, the part #W0133-1611115 accumulator, which is significantly smaller than the OEM accumulator, was originally engineered and designed for K-Jet applications installed on small displacement inline 4 cylinder engines, specifically the BMW 1.8L and 2.0L M10 engine, as used on the late '70's / early '80's 318i and 320i, and the Volvo 2.1L B21 engine, as used on the '77-'81 242.

While they perform exactly the same function, the larger size of the OEM accumulator provides a greater internal volume, thus resulting in the rest pressure being held for a longer period of time after engine shut down - especially as the accumulator ages. Also, the smaller sized units make mounting with the OEM bracket a more daunting task, requiring a rubber hose sock/adapter.

The OEM size is still on Bosch's production schedule and hasn't been discontinued as of this posting, however, the size of the production run has been significantly decreased, thus causing a decrease in overall supply and an increase in the wholesale price, which as I've been made to understand it is DMCH's and Hervey's reason for going with the smaller accumulator.

Personally, I'd rather have the choice, as I don't mind paying a little more for the OEM/stock size, which was actually engineered/designed for split bank 6-cylinder applications like we have in the DeLorean.

As it currently stands, the OEM sized fuel accumulator can currently be obtained from Josh Bengston of DeLorean Performance Industries (DPI), Summit Racing, and other web outlets by simply google searching the part# 0438170029.

DCUK Martin
07-13-2013, 09:48 AM
While they perform exactly the same function, the larger size of the OEM accumulator provides a greater internal volume, thus resulting in the rest pressure being held for a longer period of time after engine shut down - especially as the accumulator ages.

*snip*

I don't mind paying a little more for the OEM/stock size, which was actually engineered/designed for split bank 6-cylinder applications like we have in the DeLorean.

Sorry but this doesn't stack up. The accumulator will only usefully account for very tiny leaks in the system - and tiny leaks tend to become big leaks very quickly. As long as there's some swept volume in the accumulator's diaphragm, you have to consider the volume of the whole high pressure side - and in that respect 6 cylinders is better than four, although in reality it'll make precious little difference if you have a leak.

On the subject of the accumulator itself, there are in fact two original Bosch numbers which are appropriate for the DeLorean. One was the number applied to Volvo and one was the number applied to Renault and relates to the list price, not the part itself which is identical. To this day one is cheaper than the other but noth are still available.

David T
07-13-2013, 01:32 PM
Sorry but this doesn't stack up. The accumulator will only usefully account for very tiny leaks in the system - and tiny leaks tend to become big leaks very quickly. As long as there's some swept volume in the accumulator's diaphragm, you have to consider the volume of the whole high pressure side - and in that respect 6 cylinders is better than four, although in reality it'll make precious little difference if you have a leak.

On the subject of the accumulator itself, there are in fact two original Bosch numbers which are appropriate for the DeLorean. One was the number applied to Volvo and one was the number applied to Renault and relates to the list price, not the part itself which is identical. To this day one is cheaper than the other but noth are still available.

The length of time you can hold Rest Pressure is affected by the time it takes for the Thermo-Time switch to cool enough to run the Cold Start Valve. If you were to lose Rest Pressure too quickly and the TT switch is not going to run the CSV you will have the classic hard hot restart problem. If you change the timing of one you need to adjust the timing of the other. These parts were sized to operate as a system and to operate at different times depending on were you are in the warm-up or cool down cycle. If you have a "leaky" fuel system and a small accumulator you may see that it can be difficult to restart the car if you do not let it cool down enough for the TT to work. That is why, if you do have the smaller accumulator, it may make sense to get bitmaster's RPM priming relay. It will boost the rest pressure enough to get you going.
David Teitelbaum

DMCMW Dave
07-13-2013, 03:39 PM
........ If you have a "leaky" fuel system .

.......you should fix it.

David T
07-13-2013, 04:00 PM
.......you should fix it.

I agree with that but some leak down faster than others. That's why there is a minimum spec, it should (and could) be higher for a longer time. Point is, there is variation from car-to-car.
David Teitelbaum

DCUK Martin
07-13-2013, 04:12 PM
The length of time you can hold Rest Pressure is affected by the time it takes for the Thermo-Time switch to cool enough to run the Cold Start Valve. If you were to lose Rest Pressure too quickly and the TT switch is not going to run the CSV you will have the classic hard hot restart problem. If you change the timing of one you need to adjust the timing of the other. These parts were sized to operate as a system and to operate at different times depending on were you are in the warm-up or cool down cycle. If you have a "leaky" fuel system and a small accumulator you may see that it can be difficult to restart the car if you do not let it cool down enough for the TT to work. That is why, if you do have the smaller accumulator, it may make sense to get bitmaster's RPM priming relay. It will boost the rest pressure enough to get you going.


The point of maintaining rest pressure is to prevent the fuel vapousising in the lines on a hot engine. See http://en.wikipedia.org/wiki/Saturation_Dome if you want some formal thermodynamics but suffice to say the higher the pressure of a fluid, the higher its boiling point. The accumulator is there to maintain the pressure such that the fuel can't boil in the ambient heat of the fuel system.

As long as rest pressure keeps the fuel above boiling point as the engine temperature falls, you won't have a hot start problem.

I repeat: The only difference between two accumulators of different volumes is the time it'd take for a leak to cause a problem. As Dave says, fix the leak!

On the subject of priming however, a smaller accumulator means a faster priming time. I agree priming is a very good idea and many original RPM relays do it anyway.

Bitsyncmaster
07-13-2013, 04:54 PM
It would be great if the fuel system was so tight that it would hold rest pressure for the 4 or more hours it takes for a hot engine to cool down in the summer months. Mine will hold about 3 hours and some have claimed it still had pressure overnight. I don't think anyone has claimed longer than that 12 hour overnight so what is causing the leaks?

Rich
07-13-2013, 05:45 PM
It would be great if the fuel system was so tight that it would hold rest pressure for the 4 or more hours it takes for a hot engine to cool down in the summer months..... so what is causing the leaks?

When the system is indeed tight there are no rest pressure-related restart problems in any weather.

As to the good question about what is causing a given rest pressure leak it's tough to pin it down since there are several potential leak points in parallel, as mentioned in many threads already and as shown in the diagrams below from the DMC Workshop Manual. The shaded sections of K-Jet plumbing are the rest pressure-related parts. Most folks look to the accumulator, the fuel pump check valve and the seals to begin with. Well, to begin with one gets under the car and looks for any sign of seeping/dripping fuel from the main line or joints between the pump and the K-Jet head.

Read the advice at the bottom of page D:01:14 below, which mentions a few of the basic leak points, but not all of them.

Remember, a leaking accumulator diaphragm will normally NOT show up as a visible fuel leak. The "leaking" fuel gets routed back to the tank via a safety overflow hose from the back end of the accumulator. So in this regard it's just as tough to "see" a leaky accumulator as it is to see a leaky seal or check valve.

20478

20479

Ron
07-13-2013, 05:59 PM
I don't see waiting on the TTS to cool down doing any good WRT a classic Hot Start problem. Yes it heats up anytime you engage the starter, but if the coolant is 95F or higher, it removes the Cold Start Valve's ground, disabling it -- Below 95F there is no Hot Start problem.

DCUK Martin
07-14-2013, 06:46 AM
I don't see waiting on the TTS to cool down doing any good WRT a classic Hot Start problem. Yes it heats up anytime you engage the starter, but if the coolant is 95F or higher, it removes the Cold Start Valve's ground, disabling it -- Below 95F there is no Hot Start problem.

That's how I read David's post first too, but on re-reading it I realised what he was saying. He is suggesting that at any point when the engine is warm enough for the TTS to NOT engage, a failure of rest pressure will cause a hot-start issue. IMO it isn't that simple (ref fuel latent heat of vapourisation vs pressure) , in fact I know the engines start pretty well without a functioning CSV, it just takes slightly more cranks and maybe it'll be a bit grumpy for the first few revs.

Ron
07-14-2013, 10:11 AM
That's how I read David's post first too, but on re-reading it I realised what he was saying. He is suggesting that at any point when the engine is warm enough for the TTS to NOT engage, a failure of rest pressure will cause a hot-start issue. IMO it isn't that simple (ref fuel latent heat of vapourisation vs pressure) , in fact I know the engines start pretty well without a functioning CSV, it just takes slightly more cranks and maybe it'll be a bit grumpy for the first few revs.
Agree.
I saw that in the later part, but when I re-read it originally, I couldn't get past the first sentence (ties the times together, first)...It makes more sense with a 1/2 cup of coffee and ?"effectively"? inserted before "hold". (Which I think was meant now.)

I still think the discussion is missing the temp range from the point where the TTS disables the CSV to fuel vaporization. Seems it is more than wide enough to make most of this moot. Similarly, I think the size differences in accumulators is insignificant. Dave S supplied the answer to both - fix the leak. LOL

David T
07-14-2013, 05:28 PM
Agree.
I saw that in the later part, but when I re-read it originally, I couldn't get past the first sentence (ties the times together, first)...It makes more sense with a 1/2 cup of coffee and ?"effectively"? inserted before "hold". (Which I think was meant now.)

I still think the discussion is missing the temp range from the point where the TTS disables the CSV to fuel vaporization. Seems it is more than wide enough to make most of this moot. Similarly, I think the size differences in accumulators is insignificant. Dave S supplied the answer to both - fix the leak. LOL


The rest pressure serves 2 purposes. One is to raise the vaporization pressure. The other is so the fuel injectors can operate quickly during the cranking cycle. The CSV does not need much pressure to operate so it doesn't need rest pressure and the fuel should not be vaporizing if it is cold enough to operate the CSV. Vaporization isn't so big a deal because as soon as the fuel pump is running it will pressurize the system and recondense the vapors. IMHO the rest pressure is mainly to get the fuel injectors to operate quickly. In theory you don't even need the accumulator if you can get the fuel pump to run long enough to prime the system and get the pressure up enough to operate the fuel injectors. Many RPM relays don't even prime the pump so you are starting on rest pressure or the CSV (or not at all). Continuous cranking isn't going to get the fuel pump to run and the TT will shut the CSV down after a few seconds. Cycling the key on and off may get the RPM relay to run the pump enough to get the rest pressure up. Depends on that damm RPM relay. BTW with the Ethanol they add to the fuel the vaporization pressure is a LOT lower than it used to be. Bad news for people with carbs. Good thing most cars no longer have them!
David Teitelbaum

Ron
07-14-2013, 09:59 PM
The rest pressure serves 2 purposes. One is to raise the vaporization pressure. The other is so the fuel injectors can operate quickly during the cranking cycle. The CSV does not need much pressure to operate so it doesn't need rest pressure and the fuel should not be vaporizing if it is cold enough to operate the CSV. Vaporization isn't so big a deal because as soon as the fuel pump is running it will pressurize the system and recondense the vapors. IMHO the rest pressure is mainly to get the fuel injectors to operate quickly. In theory you don't even need the accumulator if you can get the fuel pump to run long enough to prime the system and get the pressure up enough to operate the fuel injectors. Many RPM relays don't even prime the pump so you are starting on rest pressure or the CSV (or not at all). Continuous cranking isn't going to get the fuel pump to run and the TT will shut the CSV down after a few seconds. Cycling the key on and off may get the RPM relay to run the pump enough to get the rest pressure up. Depends on that damm RPM relay. BTW with the Ethanol they add to the fuel the vaporization pressure is a LOT lower than it used to be. Bad news for people with carbs. Good thing most cars no longer have them!
David Teitelbaum
It IS a big deal. According to the manual, rest pressure is to prevent vaporization. There is no mention of injector operation or any other purpose. Note rest pressure is 1.7bar (after 10 min) and injectors open at 3.5bar, about what you have for control pressure. That answers it all for me...

That's a big IF you have there. IF "you can get the fuel pump to run long enough to prime the system and get the pressure up enough to operate the fuel injectors", THEN you don't have a vaporization problem in the first place. Oversimplified here, you simply can not get pressure when fuel is that hot -- the vapor bubbles will convert back to liquid first, if anything, so most of the energy is spent (converted) there...just like with AC, its temp/pressure, you know this. That's all the rest pressure is for. The injectors will have plenty of pressure by the time fuel from the CSV is drawn all the way through the pipe and manifold, IF you can produce enough to get the CSV to fire in the first place.

DeLoreanDMC81
02-10-2017, 07:40 PM
I'm needing to get a new fuel accumulator ASAP. Did we decide that the one from summit racing is the correct OEM size? If so I'm going to order it from there.

James
6408 & 2168

DMC5180
02-10-2017, 09:41 PM
Yes, it's the correct size.


Sent from my iPhone using Tapatalk

Chris 16409
02-11-2017, 12:20 AM
I'm needing to get a new fuel accumulator ASAP. Did we decide that the one from summit racing is the correct OEM size? If so I'm going to order it from there.

James
6408 & 2168

Here you go:

http://www.ebay.com/itm/331898011575

You can get E-Bay bucks too.

DeLoreanDMC81
02-11-2017, 03:41 AM
Thanks for that.

I actually saw that one on ebay earlier and was going good to get it from there. Just because like you said, the eBay bucks. :-D

James
6408 & 2168

Morpheus
02-11-2017, 10:14 AM
I just picked up mine on Amazon for $135 and free shipping:

https://www.amazon.com/gp/product/B001CO6GJ2/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1