View Full Version : General VIN 1780 - The Resurrection Blog
DMCNI
07-06-2013, 05:59 PM
Hi my names David, I am from Northern Ireland and was fortunate to live across the road from the DMC factory, as a child I watched the car being transported to the docks. I always promised myself a Delorean and now I finally have one when I bought VIN1780 last Saturday 29th June 2013.
The history I know of the car is as follows:
The car was built in Dunmurry in June of 1981 and made its way to the QAC in Troy, before being sold at a dealership in Cuyahoga Falls, Ohio. The car remained in Ohio until the 7th May 1987 when it was purchased by a man in Florida, at the time of purchase the mileage was recorded as 28282.
VIN1780 was sold on 15th August 1989 to a man from England who paid $10000 for the car the mileage was recorded as 28597 miles. The car was imported to the Southampton (England) by PEL, it arrived in the UK on the 26th October 1989, the import tax bill was £2327.90 which was paid 7th November 1989.
The car was first registered in the UK on the 26th January 1990, it was then sold on to a man from Deal, Kent, (England) on the 23rd August 1990. Vin1780 was last MOT'd on the 25th February 1992 with recorded mileage of 30692, the car then made its way into his garage with 30893 miles where it lay untouched for 20+ years, until 29th June 2013 when I purchased the car and brought it back home to Northern Ireland.
The last owner of the car passed away many years ago and as I understand the car was to be sold to pay for his funeral but that never happened, until his sister recently approached a member of the Delorean UK Club to sell the car and it ended up in my hands.
The car currently resides at my mechanics, he had tried to manually turn the crank at the start of the week, but then engine has seized, so some special lube went into the engine and I got the good news today that he had managed to turn the crank (wooohoo). A new starter motor is on order, I need new gas struts for the doors/ luggage compartment and a new seal where the drivers gullwing door meets the roof (had a puddle in ashtray today). New tyres are on order (proper size), the brake discs need to be skimmed, the calipers need rebuilt and the brake lines need replaced.....that is probably just the start of it.
The windows are taped up as the battery has not been connected to see if they work.
Overall the car is in great condition and I think I got myself a "wee" bargain as we say in Northern Ireland
Theses threads have been done more than a few times now on here, but please feel free to offer advice etc...the Delorean rebuild world is new to me so hints tips on what the essentials that need to be done will greatly received.
Here are a few photos for you to enjoy
http://imageshack.us/a/img534/4096/cobl.jpg
http://imageshack.us/a/img21/8848/xksd.jpg
http://imageshack.us/a/img441/3922/hcvg.jpg
http://imageshack.us/a/img23/9933/mj4y.jpg
http://imageshack.us/a/img607/1769/c7hv.jpg
http://imageshack.us/a/img855/5219/tvo3.jpg
http://imageshack.us/a/img809/4804/7hwj.jpg
http://imageshack.us/a/img534/2779/g5h1.jpg
http://imageshack.us/a/img841/7835/h6pl.jpg
http://imageshack.us/a/img402/7849/0b1y.jpg
http://imageshack.us/a/img62/6015/ae44.jpg
http://imageshack.us/a/img689/5093/ejuc.jpg
Kenny_Z
07-06-2013, 06:08 PM
Congratulations on the purchase. She's definitely a good looking car. Good luck on the restoration.
Jimmyvonviggle
07-06-2013, 08:14 PM
Congratulations and welcome. I really like the story of your car, and how it found its way back home to Ireland.
I'm sure someone is going to say you towed it the wrong way. Do you have the original mags?
dvonk
07-07-2013, 03:03 PM
love those gas flap hoods. welcome! :wave:
Congratulation on your purchase.
You have a little job on the brake system, then you'll probably be ready.
I have seen on picture, you also have a beautiful Subaru Impreza ;)
DMCNI
07-08-2013, 02:28 PM
Thanks for the welcome fellas :)
The Subaru is my mechanics, I couldnt afford to have a car like that and a Delorean :)
Currently have an Audi A3 sportback and a Renault Sport Clio 182, the Clio is going though to fund the new purchase :) Check the Clio out on youtube if your not familiar with them, one of the best hot hatches ever!
Congratulations and welcome. I really like the story of your car, and how it found its way back home to Ireland.
I'm sure someone is going to say you towed it the wrong way. Do you have the original mags?
Hi Jimmy excuse my ignorance what are the original mags?
Thanks for the welcome fellas :)
The Subaru is my mechanics, I couldnt afford to have a car like that and a Delorean :)
Currently have an Audi A3 sportback and a Renault Sport Clio 182, the Clio is going though to fund the new purchase :) Check the Clio out on youtube if your not familiar with them, one of the best hot hatches ever!
Hi Jimmy excuse my ignorance what are the original mags?
He is referring to the wheels (rims). Many people call them mag wheels as some are made of a magnesium alloy
Jonathan
07-08-2013, 02:50 PM
...as the battery has not been connected to see if they work.
~~~
Theses threads have been done more than a few times now on here, but please feel free to offer advice etc...the Delorean rebuild world is new to me so hints tips on what the essentials that need to be done will greatly received.
When you do get the battery hooked up, I'd be curious to know if the wiper/signal/horn stalk assembly is working correctly. It seems to be pointed at a couple strange angles in the photos. When I got my car initially, my left side stalk on the steering column was bent quite a bit, but the electrical functions still worked. It is in the direct path of your knee, and if you're not watching, can get whacked enough to bend it.
Perhaps also worth noting in advance, in case someone out there might benefit from it, the trip reset plunger is meant to be pushed in and not twisted to reset the miles back to 000. Cars often have them broken for that tiny little plastic stem doesn't handle the twisting very well before it snaps. Push it in to reset back when you get gas and you should be good to go :)
DMCNI
07-08-2013, 02:52 PM
Ahhh I see, they are in my posession. I have them off the car to get the new tyres on.
The rims are in good condition for being 32 years old but they will need a refurb as the paint is starting to peel/bubble on the inside dish of the alloys. However thats not a top priority job at the moment, getting the car up and running is the main aim, get the braking system sorted etc.
Ordered replacement gas struts, the TAB's kit and a door seal which I read is the hardest seal to put on the car, typical ha ha
DMCNI
07-08-2013, 02:56 PM
Hi Jonathan, it will be interesting to see if there are gremlins in the electrics fingers crossed they will work.
Interesting about the stalks, I would have known no different I just assumed they were in a normal position.
Are the electrics simple to work at?
Jonathan
07-08-2013, 03:21 PM
Hi Jonathan, it will be interesting to see if there are gremlins in the electrics fingers crossed they will work.
Interesting about the stalks, I would have known no different I just assumed they were in a normal position.
Are the electrics simple to work at?
Yours might indeed be fine. Hard to see from the photos. I think when I was looking at the right one, may not have realized it could be that the wiper speed end has been turned forward or back. You could be right though... and hopefully able to keep an eye out for wandering knees!!
The electrics are simple to work at/on, yes. Only because you can get at most things pretty easy unlike the fuel accumulator or something similar. Whether some gremlins have been in there over the years making "improvements" will be seen.
When you get to that point, take some photos of the fuse and relay area behind the passenger seat under the special Lotus plywood piece, and post them here. Obvious stuff can be spotted and compared to the design drawings. Certain upgrades can also be fairly easily checked for. Some of the items you basically find out if they are working or not when you go to try them. Slowly and surely if it is something that could get you in trouble perhaps, but test everything and note what isn't doing what it should be doing.
Horns, wipers, stereo, window switches, etc. are pretty easy to check. When you find something not working, then the fun begins. An interior or exterior light not coming on could mean just a burnt out bulb, or it could mean many other things. Methodically going through the whole list of components on the car and taking inventory of what is and isn't working is one approach.
You may find more than one problem is tied to the same issue, such as a bad fuse or previous inhabitant of the area like a mouse. The electrical system may not be the best original design, but it is also not the hardest thing in the world to figure out. Patience comes in handy here as do these types of forums and having people near you (in person or the internet) to give you help or hints. Luckily, you're already in the right spot :)
If you have an automatic (can't remember as I type this at the moment without seeing the photos again), there is a shift computer governor that can cause some grief on when the transmission shifts to the next gear. For my car, that was likely the most challenging to sort out. Not because the ultimate solution wasn't just to get a rebuilt one and install it, it was because trying to understand what was going on and learning what might be the problem based on what the car was doing wasn't super obvious in the beginning. Again, good test of your troubleshooting skills... and patience. Keep it in perspective and walk away and take a break if you get frustrated. As they say, 9,000 cars made and less than that still in existance. With 7 billion people on the planet, you are one in a million that "gets" to own one of these cars. That's pretty lucky/fortunate... although hard to remember sometimes after slicing your hand open on sharp stainless or whacking your head for the 10th time on the door, lol :)
Dangermouse
07-08-2013, 03:22 PM
Hi Jonathan, it will be interesting to see if there are gremlins in the electrics fingers crossed they will work.
Interesting about the stalks, I would have known no different I just assumed they were in a normal position.
Are the electrics simple to work at?
Pretty simple stuff. Minimal "black boxes"
Go here:
http://dmctalk.org/showthread.php?40-All-Wiring-Schematics
and download and print off everything. Some kind soul redid all the major sub-equipment areas into easy to read mini-schematics.
DMCNI
10-20-2013, 07:42 PM
VIN1780 hit a bit of a brick wall, the metering head was giving problems and I had to either get the current one refurbed or try source a new/used one....Thomas (DMC4087) came up trumps and sourced me one on the Eurotec forum.
Yesterday Thomas aka the DeLorean Doctor popped over to look at the engine in VIN 1780, he fitted the metering head I had got from a Volvo and we tried to start the car. The car tried to kick into life and we could here it wanting to turn over but it just couldn't do it on its own, so Thomas controlled things from the engine bay as I turned the key over and he revved the engine from the throttle cable, plooms of smoke came out the back of the car....Friends of the Earth and Greenpeace would have had a fit.
The car still wouldn't idle and this continued to be the story of the day, so Thomas did a fuel injector spray test and found that they were not functioning properly with either no fuel getting through the injectors or any flow there was, was very limited....the injectors have now been stripped off the car and are going to be refurbished in the hope this sorts the problem out, or else a new set will be purchased.
Any way here is a video of VIN 1780's engine running for the first time in 20 plus years!!....thanks to Thomas! :D
http://youtu.be/Y7ELj1O3ZDI
**Could the mods maybe move this thread to the JZ's restoration shop?**
DMCMW Dave
10-20-2013, 08:14 PM
Any way here is a video of VIN 1780's engine running for the first time in 20 plus years!!....thanks to Thomas! :D
http://youtu.be/Y7ELj1O3ZDI
**Could the mods maybe move this thread to the JZ's restoration shop?**
Not unusual, if the fuel distributor was bad the injectors are usually plugged as well. Also make sure the frequency valve is buzzing, if not you'll need to unstick it, also blow out the warmup regulator.
Sounds like you have some dry A/C belt bearings and/or alternator bearings too.
NightFlyer
10-20-2013, 09:52 PM
Not unusual, if the fuel distributor was bad the injectors are usually plugged as well. Also make sure the frequency valve is buzzing, if not you'll need to unstick it, also blow out the warmup regulator.
Sounds like you have some dry A/C belt bearings and/or alternator bearings too.
My injectors were good, but the FD was bad.
DMCMW Dave
10-20-2013, 10:16 PM
My injectors were good, but the FD was bad.
I've seen them both ways, i.e. all the injectors plugged but a good FD, and the reverse, and everything bad. It must depend on conditions, fuel, and time.
DMCNI
10-21-2013, 03:03 AM
Not unusual, if the fuel distributor was bad the injectors are usually plugged as well. Also make sure the frequency valve is buzzing, if not you'll need to unstick it, also blow out the warmup regulator.
Sounds like you have some dry A/C belt bearings and/or alternator bearings too.
Thanks for the info Dave I will get this all looked at....we did wonder what the high pitch squeal was.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.