Log in

View Full Version : Building a Delorean one piece at a time....



Chris Burns
07-07-2013, 11:08 AM
My friend gave me this last night from his Concours Delorean project. This part did not qualify for Concours so he switched it out for a part that would qualify.

Domi
07-07-2013, 03:42 PM
It's a good start!

Dangermouse
07-07-2013, 04:19 PM
Haha.

Chris is being sill-y again :)

NightFlyer
07-07-2013, 05:52 PM
If you join DMCToday.com, you can supposedly learn how to build a DeLorean out of duct tape and lawn mower parts! :cool1:

LordFly
07-07-2013, 07:03 PM
I've been saving all my used parts. When we're finally at the same event, I'll bring you a small pile. I've got pull straps, speakers, struts, etc. All kinds of barely useful stuff! :D

thirdmanj
07-07-2013, 07:26 PM
If you join DMCToday.com, you can supposedly learn how to build a DeLorean out of duct tape and lawn mower parts! :cool1:

^^This guy just don't quit, does he?

;)

louielouie2000
07-07-2013, 10:21 PM
Out of curiosity, what disqualified this part from being used on a concours car? Wear? It certainly looks OEM.

Chris Burns
07-07-2013, 10:30 PM
My buddy said that the part had been added by the QAC in 1981 and not the original factory. Very strange.:screwy: I agree with you that I see no difference personally, but who am I to turn down freebies. lol This Concours Delorean is for sale at 50k. It's VIN 2535, black interior, manual, extremely clean frame, NCT tires. and 3500 miles.

I will include a pic:

20428

NightFlyer
07-07-2013, 11:54 PM
^^This guy just don't quit, does he?

;)

I am da man! :headbang:


My buddy said that the part had been added by the QAC in 1981 and not the original factory.

Well, if QAC changes affect concours judging, then my car would probably end up being disqualified from entering, despite it's otherwise 99.98% originality :biggrin:

I believe that your buddy is referring to the screw holes that are present in the pieces he gave you - they were added by the QAC's as the original design of the sill plate wasn't effective at keeping them attached to the car. This was covered by another thread:

http://dmctalk.org/showthread.php?2254-Screws-where-there-shouldn-t-be-any&highlight=door+sill+screws

1798 has the screws in the sill plates.

Farrar
07-08-2013, 03:34 PM
1798 has the screws in the sill plates.

So does #2613. (But most of the screws just spin in place.)

NightFlyer
07-08-2013, 03:58 PM
So does #2613. (But most of the screws just spin in place.)

I'm not sure how much grip the screws have in my car, as I've never tried to remove the plates. I presume that they're just self-tappers.

Dangermouse
07-08-2013, 04:04 PM
My buddy said that the part had been added by the QAC in 1981 and not the original factory.

I am curious as to what he is replacing it with that makes it "concours acceptable" Surely any other sill has come from either another D, DMCH or a 3rd party collection of parts.

Is a sill from a parts car more correct than one put on at a QAC? Who's to say the sill from the parts car wasn't put on at a QAC either?

dustybarn
07-09-2013, 08:25 AM
1776 has the QAC screws too. I guess I'm surprised they would be a problem for concours, given that they were present upon delivery to the dealer. What point in the supply chain does a concours car have to represent? I guess 1776 would have to have a busted inside rearview mirror, because the records show that it was replaced at the QAC.

This may be an unusual situation compared to other marques in that many cars underwent substantial rework prior to delivery. At that point what constitutes "originality"?

NightFlyer
07-09-2013, 01:56 PM
1776 has the QAC screws too. I guess I'm surprised they would be a problem for concours, given that they were present upon delivery to the dealer. What point in the supply chain does a concours car have to represent? I guess 1776 would have to have a busted inside rearview mirror, because the records show that it was replaced at the QAC.

This may be an unusual situation compared to other marques in that many cars underwent substantial rework prior to delivery. At that point what constitutes "originality"?

I wondered the same thing myself, however, no one could answer the question when I previously posed it. In addition to originality, the cars supposedly also have to be VIN correct for concours. So once again, QAC doings would kill my score, as I should have a windshield embedded antenna on 1798 according to the VIN, however, the QAC added a fixed mast fender mounted antenna and replaced the windshield on it. Thanks to Tony Swann, Rich W, and QAC POG Chris Duvall I at least have official company records showing everything that the QAC did to 1798 prior to its delivery to a dealership for retail sale. So, if I ever enter 1798 in a concours, I plan on presenting that info to the judges.

dustybarn
07-09-2013, 03:11 PM
I wondered the same thing myself, however, no one could answer the question when I previously posed it. In addition to originality, the cars supposedly also have to be VIN correct for concours. So once again, QAC doings would kill my score, as I should have a windshield embedded antenna on 1798 according to the VIN, however, the QAC added a fixed mast fender mounted antenna and replaced the windshield on it. Thanks to Tony Swann, Rich W, and QAC POG Chris Duvall I at least have official company records showing everything that the QAC did to 1798 prior to its delivery to a dealership for retail sale. So, if I ever enter 1798 in a concours, I plan on presenting that info to the judges.

Yikes! I looked up your car out of curiosity and I wonder what happened to it on the way to the QAC! 1776 got off easy with only a new rearview mirror.