screws for glove box hinges?

[Farrar]

I misplaced the four screws which fasten the lower hinges of the glove box onto the body through the insert. If memory serves, they looked like black sheet metal screws with a large thread. They may be the same size as those just above them attached to the lid, but I don't want to remove the ones from the lid itself lest I strip a hole in the lid.

Thanks!

Farrar

[Rich]

The parts diagram for this isn't clear on this.

On our car the hinge-to-lid screws are ~6mm thread length. The hinge-to-dash screws are ~10mm thread length.

Both look to have similar or same thread dia and pitch.

Am not guessing what happens if they are swapped over. Got one of each out and back in its own place without stripping anything.

[Farrar]

Thanks, Rich!