Porsche 977 Muffler Tips ***Split from For Sale***

[refugeefromcalif]

Sure Mouse:)

Here is my image that has been digitally made to show how I would prefer it without the rear fascia addition and the tips right way round:)
I was goin to have the DMC Logo engraved on them. Thankfully I didn't in case it gets sold on ebay for another car.
http://i821.photobucket.com/albums/zz135/alex-akos/delo997-muff_zps2b9e290e.jpg

Thanx for the tip Mighty Mouse:) :wiggle:

The edges of the Blacked out license plate look familar... :shhh:

Or am I Wrong? :confused:

George

[ALEXAKOS]

The edges of the Blacked out license plate look familar... :shhh:

Or am I Wrong? :confused:

George

I couldn't find a better and more perfect rear image of a D!!!:thumbup2:
So I used yours and blacked out the plate.

BTW if you google "delorean rear" under images, yours pops up.

Proud to know the owner of that "a$$" :blackeye:

[Jacko]

Sure Mouse:)

Here is the music video screenshot
http://i821.photobucket.com/albums/zz135/alex-akos/porsche-muifflers_zpsff4876e4.jpg

Here is my image that has been digitally made to show how I would prefer it without the rear fascia addition and the tips right way round:)
I was goin to have the DMC Logo engraved on them. Thankfully I didn't in case it gets sold on ebay for another car.
http://i821.photobucket.com/albums/zz135/alex-akos/delo997-muff_zps2b9e290e.jpg

Thanx for the tip Mighty Mouse:) :wiggle:

I thought I would bring you guys up to speed on the continuing saga of 4915, a gentleman's DeLorean.

I bought these tips and had Alex send them to Josh at DPI for installation. As Josh and I were chatting I realized
he had the same observation I did. The fascia is made to employ round muffler tips not the rectangular ones from
the Porsche. If you look closely at the video car you see they left the fascia as original. Josh suggested re -working
those areas to accept the rectangular tips similar to the other picture where Alex drew in the tips tucked in.

It'll take a couple of weeks in the body shop to get that done. I'll post pictures when I see them.:lockdance:

[ALEXAKOS]

I am very happy those tips will be tucked it.
That was actually my initial intention (as discussed on my thread about it (http://dmctalk.org/showthread.php?6862-Porsche-911-997-exhaust-on-a-Delorean))

I also suggest the tips be placed the correct way and not upside down as the video delorean has it!!
(see porsche image below)
Josh has a good eye and I am sure it will turn out great!

After all, Porsche intended those to be molded in the fascias.
http://s11.carcdn.gr/3490/3490145_d_b.jpg



I did a brief preview on what the complete system looks like but on this image it is hanging too low and up side down.

http://i821.photobucket.com/albums/zz135/alex-akos/delo%20resto/DSC00071_zpsda344cbf.jpg