View Full Version : Suspension How many #100154 Bushing needed?
DrJeff
08-13-2013, 08:01 AM
In the DMCH store, I can find 2 of part "100154 BUSHING, LOWER ARM" on the rear suspension diagram (item #37), and the listing on the page says that 2 are required (so that's 2 each side). However, on the front suspension I can only find one reference to part #100154 (item #33 on diagram), yet the listing says 2 are required.
So to replace all the bushings on the car, how many of part #100154 are required?
6 = 4 for rear (2 each side) + 2 for front (1 each side) [picture is correct & listing is wrong]
or
8 = 4 for rear (2 each side) + 4 for front (2 each side) [picture is wrong & listing is correct]
DMCMW Dave
08-13-2013, 08:39 AM
In the DMCH store, I can find 2 of part "100154 BUSHING, LOWER ARM" on the rear suspension diagram (item #37), and the listing on the page says that 2 are required (so that's 2 each side). However, on the front suspension I can only find one reference to part #100154 (item #33 on diagram), yet the listing says 2 are required.
So to replace all the bushings on the car, how many of part #100154 are required?
6 = 4 for rear (2 each side) + 2 for front (1 each side) [picture is correct & listing is wrong]
or
8 = 4 for rear (2 each side) + 4 for front (2 each side) [picture is wrong & listing is correct]
Picture is correct.
2 in front (one each side, inner/lower
8 in rear (4 each side, 2 each upper, 2 each lower)
Mark D
08-13-2013, 11:13 AM
Dave wins again! 38 minute response time is impressive.
DrJeff
08-13-2013, 01:01 PM
Picture is correct.
2 in front (one each side, inner/lower
8 in rear (4 each side, 2 each upper, 2 each lower)
Thanks Dave :hihi2: ... What you've specified makes much more sense.
So on the Front...
- Picture is correct, it just shows one bushing on the inner end of the lower link
- One bushing on either side = 2 bushings
On the Rear...
- Picture does not show a bushing at the inner end of either of the lower or upper link arms, but they should be there
- Picture does show bushings at the rear hub carrier-end of both link arms
- Four bushings on either side = 8 bushings
I had previously bought 4, and then couldn't decide if I needed 6 or 8, now I know I need 10!
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.