PDA

View Full Version : Toby TABs



Patrick C
08-25-2013, 11:18 PM
Did anyone else follow this auction? A new set of Toby's famous trailing arm bolts sold for $787! I'm glad I bought mine many years ago!

http://www.ebay.com/itm/DeLorean-Toby-TABs-Trailing-Arm-Bolts-/271260761431?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWAX%3AIT&nma=true&si=Ej1qaj4clrUOykx6T4RJYTX9xR4%253D&orig_cvip=true&rt=nc

http://web.archive.org/web/20021231220758/http://delorean-parts.com/images/TAB%20data.jpg

Chris 16409
08-25-2013, 11:36 PM
I think I'll take mine off my car and offer them for sale!

jparenti
08-26-2013, 02:02 AM
What's the going rate for those normally right now? And I can never get an answer on why they're never going to be produced again.

kings1527
08-26-2013, 03:17 AM
For $787, I have every desire to keep an eye on my updated non-OEM TABs. To me, that's an outrageous price to pay for something where you have several other fine alternatives. Inconel apparently is made from high-quality diamond and pixie particulate.

I was a potential player at around $200 but beyond that, :hysterical:

kings1527
08-26-2013, 03:57 AM
http://www.osstainless.com/specialty-materials/exotic/inconel-718.php

I'm sure that's an option, right there, if someone were interested in bringing them back into production. I have no idea who produced the originals or the cost, but I'm sure a decent-quantity order would be less than $787/pair.

They list theirs as having a 12-point head, just like the Toby TABs. Maybe they were the original source.

DCUK Martin
08-26-2013, 06:51 AM
I believe Toby's contact "in the industry" retired. He was getting a very good rate. Frankly $100 for a pair of those bolts was a steal. I remember it took Toby several months to sell the first batch because he had them made because of a load of DMLers saying "I'll buy a set!" but once they were available, everyone sits back and thinks "I'll get around to it one day".

It's not just about the material, they need to be heat treated to get that spectacular performance.

BTTF-1
08-26-2013, 07:39 AM
I was in the bidding for a while. I was willing to go to 300 however when the price got to 306 that was it for me.

I've asked Toby a couple times over the years. He always said the cost would be to high and no one would pay it.

I bet they would.

Just a thought!

ED:angry_whip::raveon::partyhat::partyhat::angry_w hip::angry_whip::smackbum::smackbum:

Delorean02378
08-26-2013, 09:07 AM
Unbelievable! I thought the original binnacles going for $1,000 was crazy but this auction tops that because there are decent replacements. I had two pair of Toby Tabs and now have one, needless to say, I think I'll hold on to my last set.

Mark D
08-26-2013, 11:47 AM
Holy crap!

I bought a set on ebay last year for $150 and I thought I paid a lot. I hadn't seen another set available since then though. Glad I snagged them when I did.

Bitsyncmaster
08-26-2013, 12:45 PM
At those prices I might consider machining some from titanium.

Screamin Yellow D
08-26-2013, 02:36 PM
I'll take the losing bid of $777 for my new set of Toby tabs.

tgraham
08-26-2013, 03:06 PM
Before everyone jumps to conclusions about current market conditions for Inconel TABs, remember that this is eBay, after all... let's see if that same set is back up on the block in a few weeks due to non-payment :)

Travis

Domi
08-26-2013, 03:11 PM
What a price, this is crazy!
Now I regret I didn't bought them back in the old days :banghead:

DCUK Martin
08-26-2013, 03:29 PM
Pure Titanium would be a very poor material choice. An alloy such as TA10 would be at least part way towards Inconel 718 but still nowhere near as good.

pezzonovante88
08-26-2013, 11:39 PM
I personally don't have Toby's TABs, but I'm having a hard time seeing the value there when there are other high-quality alternatives.

Chris 16409
08-27-2013, 01:46 AM
As long as you inspect your TABS every other year, you can get away with OEM bolts!

DSNW Toby
08-27-2013, 02:45 AM
Before everyone jumps to conclusions about current market conditions for Inconel TABs, remember that this is eBay, after all... let's see if that same set is back up on the block in a few weeks due to non-payment :)

Travis

Travis - I have been made aware of who purchased this set of TOBY-Tab's. Let's just say that non-payment is a non-issue. The transaction is for real. That's about all I can say at this time.

Nicholas R
08-27-2013, 04:20 AM
Travis - I have been made aware of who purchased this set of TOBY-Tab's. Let's just say that non-payment is a non-issue. The transaction is for real. That's about all I can say at this time.

Wil.I.Am? Seems like the kind of guy to spend $800 on a set of bolts, lol.

Tillsy
08-27-2013, 05:07 AM
The transaction is for real. That's about all I can say at this time.

One thing is for sure - it sure as hell wasn't Bill or Steve ;)

BTTF-1
08-27-2013, 07:27 AM
Maybe this sale will bring out a few more sets at a lower cost on e-bay.

ED:Headspin::popcorn::popcorn::Headspin:

jparenti
08-28-2013, 08:54 AM
Wil.I.Am? Seems like the kind of guy to spend $800 on a set of bolts, lol.

I doubt Mr. Am's car has a need for DeLorean TABs -- after all, he says it's not really a DeLorean, remember? 😄

He did more damage to that car than the train at the end of BTTF III.


Sent from my iPad using Tapatalk - now Free (http://tapatalk.com/m/)

BTTF-1
08-28-2013, 09:21 AM
So what is peace of mind worth? I was willing to go 300.
I think I would sleep better with a set.:shocked::shocked::nervous::nervous:
Just a thought!

ED:wiggle::meditation::hihi2::hihi2::wiggle::wiggl e:

Mark D
08-28-2013, 05:05 PM
If we're playing the celebrity guessing game I'll go with Seth MacFarlane.

StainlessBullet
08-28-2013, 05:15 PM
If we're playing the celebrity guessing game I'll go with Seth MacFarlane.

I'll join in on the guessing game, I bet it was the same person that bought this car.

http://dmctalk.org/showthread.php?7645-1981-for-sale

Yes. To someone well known in Hollywood no less. Someone who was quite involved with BTTF. That's all I'm at liberty to say. Can I get a mod to delete the thread or at least the phone number? Thanks.

MML
08-28-2013, 05:16 PM
If we're playing the celebrity guessing game I'll go with Seth MacFarlane.

Seth MacFarlane has a Delorean? Really? I didn't know that.

StainlessBullet
08-28-2013, 05:30 PM
Seth MacFarlane has a Delorean? Really? I didn't know that.

Yeah, if I remember right, his is also a BTTF conversion.

SteveyP
08-29-2013, 08:02 AM
Working in the Aircraft Industry as I do. I know for a fact these Inconel bolts are very very expensive. There are a few major reasons for this; firstly there are approximately 32 operations in the manufacturing process of just one bolt alone. Also they require hot forging which only a couple of manufacturers in the whole world can offer. And the raw material (Nickel Chrome) itself is on a world wide shortage. 9 month lead times for the raw material alone is the norm. Order the bolts today and expect to get them delivered to you this time next year - I kid you not! Typical usage of these types of inconel bolts would be to hold the engine pylons onto the wing - as you can imagine they have to be extremely capable to withstand all the different forces this area of usage would demand of them. Suggest that the trailing arm on a DeLorean would be an utter piece of cake for them.:wink:

Not sure what the dimensions are of Toby's Tabs? I guess 200 mm long and 12 mm wide?

Basically $716.00 for 2 probably ain't that bad tbh. Especially when you start factoring in MOQ's and any expedite fees to get them delivered quicker (typically anything from $10K to $25K)

Steve

Tillsy
08-29-2013, 09:53 AM
Since this is the open discussion forum, it's probably worth mentioning that self-sealing stem bolts are likely cheaper ;)

kings1527
08-29-2013, 02:17 PM
Working in the Aircraft Industry as I do. I know for a fact these Inconel bolts are very very expensive. There are a few major reasons for this; firstly there are approximately 32 operations in the manufacturing process of just one bolt alone. Also they require hot forging which only a couple of manufacturers in the whole world can offer. And the raw material (Nickel Chrome) itself is on a world wide shortage. 9 month lead times for the raw material alone is the norm. Order the bolts today and expect to get them delivered to you this time next year - I kid you not! Typical usage of these types of inconel bolts would be to hold the engine pylons onto the wing - as you can imagine they have to be extremely capable to withstand all the different forces this area of usage would demand of them. Suggest that the trailing arm on a DeLorean would be an utter piece of cake for them.:wink:

Not sure what the dimensions are of Toby's Tabs? I guess 200 mm long and 12 mm wide?

Basically $716.00 for 2 probably ain't that bad tbh. Especially when you start factoring in MOQ's and any expedite fees to get them delivered quicker (typically anything from $10K to $25K)

Steve

I don't think we can look at this auction and say that that's the going rate for these TABs. This auction looks to be a total anomaly. The winner is apparently very well off financially but also placed numerous bids starting in the $100-200 range in I remember right. When you really want something, money's no object for some. The real winner on this auction was the seller by finding the right buyer.

The originals apparently sold for $66/set back in '03 or so, so I find it hard to believe that production costs and demand would cause a price increase of nearly 1200%, if a little over $700/set would be a fair price like you stated.

Give me three auctions where people pay greater than $700/set and then I'll accept that as the going rate.

lazabby
08-29-2013, 02:27 PM
I'll be glad to sell my unused set of Toby tabs for $650 if anyone is interested.

Bitsyncmaster
08-29-2013, 04:25 PM
There is at least one more buyer willing to pay that money or else the auction would not have gone so high.

SteveyP
08-29-2013, 05:09 PM
I don't think we can look at this auction and say that that's the going rate for these TABs. This auction looks to be a total anomaly. The winner is apparently very well off financially but also placed numerous bids starting in the $100-200 range in I remember right. When you really want something, money's no object for some. The real winner on this auction was the seller by finding the right buyer.

The originals apparently sold for $66/set back in '03 or so, so I find it hard to believe that production costs and demand would cause a price increase of nearly 1200%, if a little over $700/set would be a fair price like you stated.

Give me three auctions where people pay greater than $700/set and then I'll accept that as the going rate.

You may find it hard to believe, but never the less that's the situation at the moment - inconel is in demand right now. Really $700.00 ain't to bad for pucker aircraft quality bolts of the same dimensions. Yes we can get them for €250 each, but then we are purchasing a minimum order of 20 pcs at a time (20 x €250.)

gradconn
08-30-2013, 09:51 AM
I'm the buyer -- and while I would have preferred to have netted out in the $400 or so range, someone else wanted these Toby TABs as badly as I did. I use my DMC as a daily driver, and I'm constantly worried about the catastrophic impact to both driver and car from a TAB failure ... which is increasingly common in these 30+ year old cars. This seemed like a minor investment compared to all the other dollars that have gone into 01922.
--
Grad Conn
PNDC Member and Loyal DMC Northwest customer
01922

BTTF-1
08-30-2013, 01:12 PM
Grad Conn
You are my hero. I feel the same way. However 300 is my limit.

ED

Domi
08-30-2013, 04:40 PM
Congratulation on your purchase Grad Conn :thumbup2:
Please post some pictures when you'll be ready to install them :)

Jonathan
08-30-2013, 06:43 PM
As long as you inspect your TABS every other year, you can get away with OEM bolts!

Thought it ok to ask this in this thread here on Toby TABs...

- What is the recommended way to inspect TABs?

Not just Toby ones in particular, but any of them, including the originals. I got under my car today doing some degreasing and realized I had a very good view, albeit it super close to my face, of the TABs. What exactly am I looking for?

I got a good look at my passenger one, and while I wouldn't put it in the pretty/pristine category, is there something measurable we can look for?

I thought one aspect was whether they were bent and one way to check that was when your rear end is in the air, but with the wheels free to rotate (not the case with my car at the moment as it is on ramps), you can give a good shake to the wheel to see if it moves?

And isn't there also a torque checking step to the inspection? Mine aren't loose to the finger check, but I didn't get a wrench on them or anything. This might also need the wheel to be hanging to do this, correct? Would it be wise to loosen them up to spin them to see if they wobble (are bent) and then retorque them? There are a few things on the car that are better to just leave alone unless forced to address, so that's why I ask.

I do see some rust on some parts of the assembly, like the bracket against the frame and the end of the bolt/nut. Just want to gauge their condition some how more than just through the fear factor version. My automatic transmission apparently makes changing them a royal PITA as I understand it...

Bitsyncmaster
08-30-2013, 06:55 PM
I don't think you can check them without removing them. Then you look for cracks, corrosion and bends. The most you can do is verify the spacers are tight and maybe put a torque wrench on them when installed.

refugeefromcalif
08-30-2013, 07:28 PM
- What is the recommended way to inspect TABs?

Not just Toby ones in particular, but any of them, including the originals. I got under my car today doing some degreasing and realized I had a very good view, albeit it super close to my face, of the TABs. What exactly am I looking for?

I was under my car the other day and was wondering the same thing.

I've searched for, (but haven't found), a Single thread that has Pictures/Name and location, (With pictures), for the most commonly talked about/worked on parts, Along with it's Acronym. (That's where I get lost Many times).
Is there such a thread that covers this?
I'd pay money for one so I wouldn't be Lost the next time I read about, "Well you should do maintance on your PORN valve." As a DeLorean Noob, I now would have to look up what my PORN valve is... :dunno: ;)

Anyway, sorry for the OT, (Off Topic), question but, I Do need to recheck my TABs and the rest of my suspension.

George

Jonathan
08-30-2013, 07:39 PM
I was under my car the other day and was wondering the same thing.

I've searched for, (but haven't found), a Single thread that has Pictures/Name and location, (With pictures), for the most commonly talked about/worked on parts, Along with it's Acronym. (That's where I get lost Many times).
Is there such a thread that covers this?
I'd pay money for one so I wouldn't be Lost the next time I read about, "Well you should do maintance on your PORN valve." As a DeLorean Noob, I now would have to look up what my PORN valve is... :dunno: ;)

Anyway, sorry for the OT, (Off Topic), question but, I Do need to recheck my TABs and the rest of my suspension.

George

No worries George (What, me worry?) :D

http://dmctalk.org/showthread.php?1775-DeLorean-Acronym-List&highlight=acronyms


http://www.youtube.com/watch?v=H_aiDDU5z18

TAB = Trailing Arm Bolt

http://store.delorean.com/c-354-5-3-0-rear-suspension.aspx

Number 25 on the diagram.

I'd love to see such an inspection procedure too. (Let us know how you make out with your PORN valve :) )

DSNW Toby
08-30-2013, 08:25 PM
I don't think you can check them without removing them. Then you look for cracks, corrosion and bends. The most you can do is verify the spacers are tight and maybe put a torque wrench on them when installed.

I will see about getting a short article prepared that describes the types of inspections possible and recommended. I don't know if it would be advisable to post an article on a public forum such as this, or to send out the information on a request basis. I will sort that out as well. We do live in a litigious society after all. It is possible to gauge general health of the bolts and other elements in the joint without removing them first. However, there is no substitute for holding a part in your hand and giving it a close look. Please stay tuned ...

Tillsy
08-30-2013, 08:37 PM
I had Dave Swingle check my TABs when he was in Australia and he showed us a procedure for doing it without removing anything - will let the experts like Dave and Toby explain it.

Mine were good but I've now got replacements in my stash of parts to fit some day.

DMCMW Dave
08-30-2013, 08:55 PM
I can state that of the two we have had come in broken, neither was particularly bent, and both had fairly obvious signs of corrosion breakdown of the plating and subsequent rust. Not even all that deep, but enough to create a stress point (riser?) in the bolt.

I'm sure Toby's explanation will be much more complete, but we (and other shops) test them by rotating them in place. If they are bent, they get replaced. If they won't rotate (an obvious sign of rust!) they get replaced. What I'm sure this misses is the no-so-obvious signs of rust. Rust on the bolt head/exposed thread could be viewed as an indicator. Ideally you would completely remove them (e.g. the hold-them-in-your-hand test) and inspect them or replace them every so often no matter what, with the "so often" period dependent upon exposure to the elements and ham-fisted alignment technicians using the wrong shims.

The conventional bolts are so cheap that periodic replacement, especially as a do-it-yourselfer, would not be a bad idea at all. I would never consider removing them for inspection only, i.e. if they come out you may as well replace them.

Jonathan
08-30-2013, 09:22 PM
I can state that of the two we have had come in broken, neither was particularly bent, and both had fairly obvious signs of corrosion breakdown of the plating and subsequent rust. Not even all that deep, but enough to create a stress point (riser?) in the bolt.

I'm sure Toby's explanation will be much more complete, but we (and other shops) test them by rotating them in place. If they are bent, they get replaced. If they won't rotate (an obvious sign of rust!) they get replaced. What I'm sure this misses is the no-so-obvious signs of rust. Rust on the bolt head/exposed thread could be viewed as an indicator. Ideally you would completely remove them (e.g. the hold-them-in-your-hand test) and inspect them or replace them every so often no matter what, with the "so often" period dependent upon exposure to the elements and ham-fisted alignment technicians using the wrong shims.

The conventional bolts are so cheap that periodic replacement, especially as a do-it-yourselfer, would not be a bad idea at all. I would never consider removing them for inspection only, i.e. if they come out you may as well replace them.

I agree with the "if they come out for inspection, new ones go back in" philosophy.

I've also seen bolt head and nut rust on mine, but don't know if they will rotate freely. If that sort of procedure gets put together, I'll definitely give it a shot.

That being said, would you consider a DIY automatic transmission owner with the typical jacks and ramps and stands at his disposal capable of changing these out? I hear talk of the auto trans needing to be moved to some degree on one side to get the bolt head in, but don't know from experience of even first hand knowledge. I would be more than happy to be the one who gives it a go and realize it is much more straight forward than was made out to be, and then to educate others wanting to do the same.

DSNW Toby
08-30-2013, 10:27 PM
Thought it ok to ask this in this thread here on Toby TABs...

<snip>

I do see some rust on some parts of the assembly, like the bracket against the frame and the end of the bolt/nut. Just want to gauge their condition some how more than just through the fear factor version. My automatic transmission apparently makes changing them a royal PITA as I understand it...

Rust never sleeps. You are correct regarding the PITA factor in changing the TAB's properly with the automatic transmission. I say "properly" because the bolts can be installed "backwards" a bit easier as compared to being correctly oriented. Visible corrosion in the joint is not a positive sign, but other tests are necessary to properly assess the health of the parts. As noted in another post ... stay tuned for some inspection ideas.

Dangermouse
08-30-2013, 10:42 PM
It is impressive that there are such knowledgeable persons within this community on something as seemingly mundane as bolts.

As a comparison, I have just found out that the engine mount bolts in my newish DD (which mount horizontally) are made of Aluminum and have a tendency to shear. Shocker!

The solution is to buy a new set of bolts from the dealer and replace.

Are they "new and improved"? Who knows!

When I ask the online community for specs for the OEM and replacement bolts (even thread pattern) all I get are crickets.

DCUK Martin
08-31-2013, 07:32 AM
Can I just say that when the TABs come even slightly loose, the handling of the car is severely compromised long before the bolt breaks. If the back of the car feels like it has a mind of its own, wandering around when you put in some quick steering movements, CHECK THE TABs. The back of the car should feel as tight as a drum and the handling should inspire confidence, not a feelng of "oh well, it was probably never that good to begin with", it's a Lotus chassis, people! :biggrin:

pezzonovante88
08-31-2013, 01:57 PM
"oh well, it was probably never that good to begin with"

I think that's a really good point because a lot of people (including me) have likely done that very thing!

jamesrguk
09-02-2013, 05:52 PM
That being said, would you consider a DIY automatic transmission owner with the typical jacks and ramps and stands at his disposal capable of changing these out? I hear talk of the auto trans needing to be moved to some degree on one side to get the bolt head in, but don't know from experience of even first hand knowledge.

I replaced the tabs on my auto, correct orientation etc... a few years ago and it really wasn't that hard, one was slightly harder to shift than the other, but I didn't have any special tools just the usual DIY stuff + torque wrench.

It was time consuming, about 2hrs one side 1hr the other, I then took it for 4 wheel alignment, made a huge difference.

I always try to catagorize jobs carefully when writing on forums to people of varying DIY abilities, I'm by no means an expert, my two categories are:
1) Hard - Jobs where precise knowledge is required perhaps working on the k-jet for example.
2) Fiddly - Poor access or multiple parts need to be removed in order to replace/access the part you need.

I would class TABs as fiddly as essentially it's a nut and bolt job but takes a bit of time to remove and replace because of the confined space you're working in.

Just MHO of course

James

Nicholas R
09-02-2013, 06:43 PM
I replaced the tabs on my auto, correct orientation etc... a few years ago and it really wasn't that hard, one was slightly harder to shift than the other, but I didn't have any special tools just the usual DIY stuff + torque wrench.

It was time consuming, about 2hrs one side 1hr the other, I then took it for 4 wheel alignment, made a huge difference.

I always try to catagorize jobs carefully when writing on forums to people of varying DIY abilities, I'm by no means an expert, my two categories are:
1) Hard - Jobs where precise knowledge is required perhaps working on the k-jet for example.
2) Fiddly - Poor access or multiple parts need to be removed in order to replace/access the part you need.

I would class TABs as fiddly as essentially it's a nut and bolt job but takes a bit of time to remove and replace because of the confined space you're working in.

Just MHO of course

James

How exactly did you take it for a 4 wheel alignment? Did you have them actually change the number of shims at the trailing arm bolts after you drove the car there? Because that is the only possible adjustment in the rear and even that is somewhat hit or miss. Plus you cant really measure anything until after you drive it and let the shims settle into place. The only other possible adjustment is camber IF you get the adjustable rear lower links.

Delorean Industries
09-02-2013, 06:57 PM
How exactly did you take it for a 4 wheel alignment? Did you have them actually change the number of shims at the trailing arm bolts after you drove the car there? Because that is the only possible adjustment in the rear and even that is somewhat hit or miss. Plus you cant really measure anything until after you drive it and let the shims settle into place. The only other possible adjustment is camber IF you get the adjustable rear lower links.

On a side note with shim choices. We stock a variety of thickness for this vary purpose. Standard TAB kits come with the oem shim size. To fine tune the rear end toe without having too much or little smaller sizes are available upon request.

DSNW Toby
09-03-2013, 02:59 AM
How exactly did you take it for a 4 wheel alignment? Did you have them actually change the number of shims at the trailing arm bolts after you drove the car there? Because that is the only possible adjustment in the rear and even that is somewhat hit or miss. Plus you cant really measure anything until after you drive it and let the shims settle into place. The only other possible adjustment is camber IF you get the adjustable rear lower links.

The rear toe is measured per the specifications in the manual, and then shims are either added or subtracted to get the correct values on each side. Each shim represents a certain increment of toe change, so it really isn't as "hit and miss" as you might think. If everything is torqued up correctly (including having the bushing preloaded to the normal "loaded" driving position), there really shouldn't be any "settling in". You must be certain that any shims used are hardened steel because they become part of the clamped joint when the TAB is torqued. If a typical soft aftermarket shim as found in most alignment shops is used, it will likely simply bend out of the way, or wear through if located at either side of the stack. If a shim shifts out of place, thereby loosening the joint, then all bets are off as to how long the TAB will last. They get pounded to death pretty quickly in a loose joint. The condition and material for the shims and both sizes of the large flat washers are critical to the success of the joint. Don't forget to check the two 8 mm bolts that attach the bushing retention plate to the frame. The loads from the TAB's feed into the bushing, and then into the frame via those two "little bolts". If they fall out or shear off, then you have effectively lost the joint. In that case, the large flat washer located on the inside of the frame bracket, which is too large to fit through the hole, will keep the parts more or less together. You will feel and hear some banging around in that case.

Bitsyncmaster
09-03-2013, 07:05 AM
Did not find damaged shims but look at these OEM washers.

DMCVegas
09-03-2013, 12:08 PM
I bought a set of Toby Tabs back when they first came out. Toby Tabs are like Zilla products where if you've got them on your DeLorean, you're set, and you can demand a higher asking price. Likewise even $700 for a couple of bolts is IMO worth the piece of mind as well as the resale value. I bent both of my OEM bolts between my refusal to slow down for speed bumps and dips, as well as launching airborne.

A few years ago when I stopped by Dave Bauerle's shop we got to talk over bolts for a while. According to him the problem with the TABs is that they're not supported on both sides. While only one side is needed for structural support, a second side is what's really needed to dampen flexing of the bolt by shock impacts. He had adaptors once upon a time that would bolt to the chassis and connect the opposite end of the bolt to stop it's flexing. He said someone helped him out with sensors they mounted on the bolts and drove over railroad tracks and found that the bolts became stable and stopped bending.

Like sway bars, turbo kits, and rear valances, this is one of those DeLorean parts that has been lost to the ages since everyone has forgotten about them. He said he might have a set or two to dig up, but that was 8-9 years ago, so who knows.

Josh
09-03-2013, 01:38 PM
Yes, the problem with the TABs is they are in single shear. This is pretty obvious when you take one out.

DSNW Toby
09-04-2013, 01:23 AM
Did not find damaged shims but look at these OEM washers.

This is exactly the kind of wear that I am talking about. As the material wears away, the clamping forces in the joint are reduced until the joint becomes loose. With movement now possible in the joint, the wear accelerates dramatically, leading to further looseness and eventual failure of components. I consider bending of a TAB as failure of that component. Fracture is the extreme case of failure, but bending and stretching are also failures in my book, because they lead to further bending and eventual fracture.

The engineering types out there will recognize this wear as being the result of extremely high bearing stresses caused by clamp-up loads together with very thin walled sleeves and inserts. Toss in a little bit of micro-movement from bolt flexure and the material begins its disappearing act. Somebody reading this just asked themselves why we can't just thicken the walls of the sleeves and inserts in order to reduce this bearing stress to manageable levels. That would require redesigning/manufacturing and rebuilding the trailing arms and the rubber bushings used in the joint. This is technically possible, but not feasible.

Bitsyncmaster
09-04-2013, 06:16 AM
This is exactly the kind of wear that I am talking about. As the material wears away, the clamping forces in the joint are reduced until the joint becomes loose. With movement now possible in the joint, the wear accelerates dramatically, leading to further looseness and eventual failure of components. I consider bending of a TAB as failure of that component. Fracture is the extreme case of failure, but bending and stretching are also failures in my book, because they lead to further bending and eventual fracture.

The engineering types out there will recognize this wear as being the result of extremely high bearing stresses caused by clamp-up loads together with very thin walled sleeves and inserts. Toss in a little bit of micro-movement from bolt flexure and the material begins its disappearing act. Somebody reading this just asked themselves why we can't just thicken the walls of the sleeves and inserts in order to reduce this bearing stress to manageable levels. That would require redesigning/manufacturing and rebuilding the trailing arms and the rubber bushings used in the joint. This is technically possible, but not feasible.

It looks like the metal compressed on the washer but it may have been wear. What I did to replace those washers was to make new ones from 4130 1/8" thick sheet. I replaced the spacers with machined 4130 bar stock. I'm going to pull my tabs since I have a set of Martins tabs waiting to replace the OEM TABs. Will see if that thin sleeve did any damage to my new washers.

jamesrguk
09-08-2013, 06:21 PM
How exactly did you take it for a 4 wheel alignment? Did you have them actually change the number of shims at the trailing arm bolts after you drove the car there? Because that is the only possible adjustment in the rear and even that is somewhat hit or miss. Plus you cant really measure anything until after you drive it and let the shims settle into place. The only other possible adjustment is camber IF you get the adjustable rear lower links.

Yes I took it to a local place (I'm in the UK) who have the Hunter 4-wheel alignment system, which has the DeLorean specs listed. I was recommended to this system as a number of UK DMC owners have had experience with them and found them to be pretty good.

1 Shim, can't honnestly remember what size, was added to the passenger side, I suspect that the original had fallen out some time ago as when I removed the oem tab it was noticeably looser than the drivers side.
There was also some adjustment required at the front end which I expected as I had only just installed a new steering rack.

Anyway it made a huge difference to the driving experience.

James

Fluxat88MPH
09-11-2013, 05:59 AM
I have a set of never used Toby Tabs still in a box as well as a gray NOS binnacle in a box, to cracks of any kind. I will entertain offers.

refugeefromcalif
09-11-2013, 08:02 PM
With what I read here, it seems that new TAB'S require a rear wheel alignment.?
What do the venders charge for changing out TAB's?

An aside, I think we've all seen that a pair of Toby TABS are on eBay right now.
Is the Lucky winner around here?

George

Bitsyncmaster
09-11-2013, 08:06 PM
Changing the TABs will not change the alignment unless your old TABs were loose. Then your new tight TABs should bring the alignment back to normal. To change the alignment you add or remove spacers.

DCUK Martin
09-12-2013, 01:05 PM
A few years ago when I stopped by Dave Bauerle's shop we got to talk over bolts for a while. According to him the problem with the TABs is that they're not supported on both sides. While only one side is needed for structural support, a second side is what's really needed to dampen flexing of the bolt by shock impacts. He had adaptors once upon a time that would bolt to the chassis and connect the opposite end of the bolt to stop it's flexing. He said someone helped him out with sensors they mounted on the bolts and drove over railroad tracks and found that the bolts became stable and stopped bending.

I have heard about this before and I am very skeptical. The bush is there to do a job. The bolt, the washers, shims, trailing arm and bush-sleeve all become one solid object with everything done up correctly (and assuming no flex in the bolt!). The bush then provides compliance allowing translational and rotational movement in all three planes. It really does encounter all of them, however small. Attempting to constrain this movement in any way is likely to have a negative effect somewhere.

Dangermouse
09-12-2013, 01:51 PM
I have a set of never used Toby Tabs still in a box as well as a gray NOS binnacle in a box, to cracks of any kind. I will entertain offers.

With this comment and the couple of sets that have sold on ebay recently, as well as the pair The DeLorean Museum are presently selling, I am beginning to wonder if there are more in boxes under the bed than actually fitted to our cars.

How many sets/pairs were manufactured?

SS Spoiler
09-12-2013, 02:12 PM
Has anyone tried to fit a heim? joint to the end of the trailing arm? You see them all the time on street rods. It would seem to be the perfect solution.

DCUK Martin
09-12-2013, 03:17 PM
A rose/heim joint is unsuitable for use on a road car if it provides a direct path from hub carrier to chassis because all bushes are there to dampen high frequency vibrations (ie road noise).

jamesrguk
09-12-2013, 05:36 PM
A rose/heim joint is unsuitable for use on a road car if it provides a direct path from hub carrier to chassis because all bushes are there to dampen high frequency vibrations (ie road noise).

Martin,

Didn't you have some inconel TABs manufactured at some point, I think mine had 718 stamped in the end.

J

DCUK Martin
09-12-2013, 05:57 PM
I found a supplier in the UK but they were funded by Walter Coe. I kept (and sold) 20 pairs I think it was. They are very good but were not heat treated to the UTS of the Toby TABs. The best option otherwise though.

Domi
09-12-2013, 06:14 PM
These one on your website?
http://www.delorean.co.uk/parts.html

DCUK Martin
09-12-2013, 06:34 PM
The ones on my website are the best "conventional" bolts with the best corrosion protection made with the correct hex head and with the minimum possible thread length.

James is referring to a set of Inconel 718 bolts Walter and I had made several years ago. I'll be honest I did look at getting more made but the cost is high, the demand is low. It's one of "those" products that's good in and of itself but not commercially viable.

I've never seen or heard of anyone bending a 12.9 bolt of any kind (eg John Hervey's are just standard cap heads which he has had electroplated)

Domi
09-12-2013, 06:40 PM
All right thanks for your answer.
I think I will order yours soon or later.
Too bad, you can't make any more 718, I'm sure some people here or in Europe will be interested?
Maybe a set of 100 pieces to start?

DCUK Martin
09-12-2013, 06:49 PM
That's 50 people prepared to pay a couple of hundred per pair....... It'd take too long to see a return. Even my current stock of 25 pairs has been "on the shelf" for over 3 years. Not complaining, I had them made cos I needed some!

Domi
09-12-2013, 06:53 PM
If I knew you had them, something similar to the toby tab, I would buy them at that time.

jamesrguk
09-12-2013, 06:59 PM
All right thanks for your answer.
I think I will order yours soon or later.
Too bad, you can't make any more 718, I'm sure some people here or in Europe will be interested?
Maybe a set of 100 pieces to start?


All right thanks for your answer.
I think I will order yours soon or later.
Too bad, you can't make any more 718, I'm sure some people here or in Europe will be interested?
Maybe a set of 100 pieces to start?

Lets say it would be $200 per pair to make, I may be wildly out, that $10'000 tied up in what would suddenly become a very slow selling product.

It's a classic example of supply and demand, there's always a hive of people who would 'definately buy one if they were available' but once the product is manufactured and brought to market the attitude shifts to 'they're available now so l'll buy one when I need it'

It's tricky for individuals to invest in manufacturing a product(s) on that basis.

I've seen numerous DMC products that have been proposed that as soon as its time to cough up some money suddenly the attitude changes, it's just how it goes

James

DCUK Martin
09-12-2013, 07:05 PM
That was certainly the case with the original 100 pairs Toby had made, it's all in the DML archive.

By the way, the $200 figure was retail ;)

jamesrguk
09-13-2013, 05:43 PM
That was certainly the case with the original 100 pairs Toby had made, it's all in the DML archive.

By the way, the $200 figure was retail ;)

Yeah I remember Toby sitting on those for quite a while, but you can bet that if he had another 100sets made he'd be sitting on them for years too.

Funny how these thing go.

J

BTTF-1
09-13-2013, 05:50 PM
So is there any chance for a another 100 Toby Tabs?

Just a thought!
Ed:hmm::wow::wow::hmm:

Delorean02378
09-23-2013, 09:31 PM
Found an original receipt for Toby Tabs. $66.00 a pair only 10 short years ago.

DSNW Toby
09-23-2013, 09:43 PM
Found an original receipt for Toby Tabs. $66.00 a pair only 10 short years ago.

10 short years ago I was selling them pretty much for what they cost to make. It was more of a public service than a money maker for sure. A lot has changed since then, including the cost of making ultra high performance fasteners such as these.

Delorean02378
09-23-2013, 09:46 PM
10 short years ago I was selling them pretty much for what they cost to make. It was more of a public service than a money maker for sure. A lot has changed since then, including the cost of making ultra high performance fasteners such as these.

And thank you for your public service. We appreciate your parts at a reasonable cost.

nkemp
09-23-2013, 10:57 PM
Another reason to check your tabs ...

When I did the frame off frame repair I found that my TABs were rusted to the TA. I had to cut the bolt to separate from the car. I tried a number of things but I never got the bolt removed from the TA. The only remaining option was to drill. BTW ... I ended up buying new trailing arms since the old ones were in such bad shape. The PO drove the car in the winter in MN which means in the salt.

So don't just think of the expense of changing or checking the bolts. If the bolt freezes to the TA you may be looking for new TAs as well.

Conundrum
09-24-2013, 04:50 AM
There is at least one more buyer willing to pay that money or else the auction would not have gone so high.I still have a new set of Toby TABs sitting right here. :eek7:

Domi
09-24-2013, 03:47 PM
Another set went for $455 a few days ago if I remember well.

Dangermouse
09-26-2013, 02:13 PM
I still have a new set of Toby TABs sitting right here. :eek7:

There's another set in storage.

Are there more in storage than actually installed?

http://dmctalk.org/showthread.php?8263-Toby-Tabs-POLL

Screamin Yellow D
09-26-2013, 04:48 PM
Another set went for $455 a few days ago if I remember well.

Yes they did, thank you very much... 1st time Ive ever bought an extra something that turned out to do more than take up space because they never got used. I almost couldnt find them!!!

GS450-Junkie
10-07-2013, 11:21 PM
Did all the Toby tab sets dry up???? No more on eBay. :frown:

lazabby
10-19-2013, 07:20 PM
Did all the Toby tab sets dry up???? No more on eBay. :frown:

There are some for sale now:
http://www.ebay.com/itm/300994849819?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

jgarland79
06-13-2014, 05:50 PM
Kickstarter might the way to go for raising funds for something like this again. Get the money up front for production, then make the product and ship it to buyers.

Sent from my Nexus 5 using Tapatalk

Domi
06-13-2014, 06:12 PM
Already done here :)
http://dmctalk.org/showthread.php?8738-I-Bolt-Inconel-Trailing-Arm-Bolts-now-at-DMC-Midwest