View Full Version : 82 Trans Am (KITT)
I didn't want to hijack Chris' thread so I started this one...
I posted pics of this particular car before, but just today, a friend of mine bought it from the previous owner. He was like a kid at Christmas! He's been a Knight Rider fan since he was 5 years old, and has been looking for a KITT ever since.
It's just converted on the exterior only, but he intends to reupholster the interior, install the dash, electronics, seats etc. in the future.
As-is it's probably not 100% accurate but it's a start!
I said I'd help out with some research in the meantime, so I'm trying to hunt down Trans Am manuals - does anyone know if you can get PDF versions of workshop manuals, parts manuals and so on, like we can with our cars? Or would he have to fork out for printed copies?
I know nothing about Trans Ams so if anyone can chip in with information I'd appreciate it!
(Chris, if you have any info on good vendors for conversion parts, interior trim parts, etc. that would be a great help as well!)
Thanks,
Martin
http://i.imgur.com/zWpamXx.jpg
http://i.imgur.com/XqmKqLH.jpg
http://i.imgur.com/l3UTbJg.jpg
http://i.imgur.com/tNz0N40.jpg
RammJaeger
10-05-2013, 09:50 PM
I love it! Do you mind if I ask what he have for it? One of my non-D cars is an 83 Trans Am that is black and gold. For the manuals I just bought a Chiltons. I'm not sure if you can get them online as PDFs or not. I have owned several Trans Ams and know a lot about them so feel free to ask me anything. One of the best place to get parts is Hawks Third Gen. They have some repro parts, and a whole salvage yard full of third gen Trans Ams.
I have an 80 SE and got a service manual HERE (http://www.faxonautoliterature.com/1982-Pontiac-Firebird-Trans-Am-Repair-Shop-Manual-Original-82-P10513.aspx?source=googleps&gclid=CJT77az_gLoCFSgS7AodXFgARg). They have one for both of its brothers for ~$50, or just about anything, including a D.
I love it! Do you mind if I ask what he have for it? One of my non-D cars is an 83 Trans Am that is black and gold. For the manuals I just bought a Chiltons. I'm not sure if you can get them online as PDFs or not. I have owned several Trans Ams and know a lot about them so feel free to ask me anything. One of the best place to get parts is Hawks Third Gen. They have some repro parts, and a whole salvage yard full of third gen Trans Ams.
Whoa, some good leads there, thanks!
He paid 7500 Euro which converts to a little over 10,100 USD, not sure if that's a good price or not?
I had a quick look at Hawks - great site! They have quite a bit of stuff there.
I have an 80 SE and got a service manual HERE (http://www.faxonautoliterature.com/1982-Pontiac-Firebird-Trans-Am-Repair-Shop-Manual-Original-82-P10513.aspx?source=googleps&gclid=CJT77az_gLoCFSgS7AodXFgARg). They have one for both of its brothers for ~$50, or just about anything, including a D.
Thanks Ron - bookmarked!
Sadly the car didn't have any manuals at all with it, so an original one will be a nice bonus.
ccurzio
10-06-2013, 12:13 AM
That's a season 4 nose.
Tillsy
10-06-2013, 12:43 AM
First cruise of my local 2013/2014 season last night and at the first stop I was parked next to my other childhood fantasy :)
http://dmctalk.org/attachment.php?attachmentid=22351&d=1381031721
Dangermouse
10-06-2013, 06:20 PM
Out of curiosity what are the general cost difference between a nice stock D and a nice trans-am and then between a BTTF and a KITT.
Say that a nice D is $20k and a BTTF replica is $65k(?)
Nice stock TA?
KITT (full replica)
ccurzio
10-06-2013, 06:56 PM
I can't speak to a BTTF replica since I don't really know what those cost, but I can tell you that you can get a super nice 3rd gen Trans-Am for around $4k, and assuming you do the work yourself, a KR replica will run between 5 and 8 thousand on top of that, depending on the work that needs to be done. $2k to $3k more if the car isn't already black.
RammJaeger
10-06-2013, 07:35 PM
Out of curiosity what are the general cost difference between a nice stock D and a nice trans-am and then between a BTTF and a KITT.
Say that a nice D is $20k and a BTTF replica is $65k(?)
Nice stock TA?
KITT (full replica)
I gave $3,500 for my 83 Trans Am. The body and mechanicals were in pretty good shape, but I've had to do quite a bit of work on the interior to fix it up. From what I've seen a good 82-84 Trans Am runs $3,000-5,000, a really nice one will run about $7,500. A quick check on Hagerty's confirms this: http://www.hagerty.com/valuationtools/HVT/VehicleSearch/Report?vc=14099
Next there a few things you really need for the car to be "correct". And the Knight Rider purists will pretty much demand a "correct" car. A correct car will be a 1982-1984 Trans Am with an automatic transmission (with the 1982 shifter knob), correct light brown doeskin color interior, T-Tops and 15inch turbo cast rims with "bowling ball" hub caps. Sorry guys, but a car without T-tops will never be worth much as a Knight Rider replica (and consequently, non-T-Top Trans Ams aren't very desirable either). A set of used PMD seats will run you about $1,000, and another $500 to recover them (unless you happen to find some in mint condition). Almost all of the tan interior parts (particularly the plastic bits) are nearly impossible to find as they have all been snatched up by people making Knight Rider replicas. You can paint your plastic parts, but they won't have the same value as authentic tan plastic interior parts. A set of 4 15" Turbo Cast rims are going to run you about $1,000 if you can find them (once again, all snatched up by the Knight Rider replica making fans). Only the 1982 car had the right shifter knob, but those are pretty easy to find and change out. You can use a car that isn't an 82-84, but plan on swapping out many of the parts so they aren't correct which can add up quick. If you do the full working dash electronics consoles, etc that will cost a lot of dosh as well. The really nice Knight Rider replicas I've seen that were correct and complete can go for around $45,000.
Here is a picture of my 83 Trans Am:
22367
Michael
10-06-2013, 08:30 PM
That's a beautiful car man!
ALEXAKOS
10-07-2013, 02:38 AM
That Pontiac is one of the sweetest looking cars of its time. You've done a great job with the wheels and all. Now on to the tricky parts! The interior conversion...
Dangermouse
10-07-2013, 04:24 PM
Right then, it's gauntlet time!
Who will finish first - Martin or Chris - in getting their interiors finished ???
ccurzio
10-07-2013, 08:20 PM
My interior conversion is a LONG way off. I don't expect to even start on it until the middle of next year.
It's also going to take a hell of a lot longer than most conversions, too. Most everyone else has the replica electronics that light up and blink/flash with the only real functional items being the speedo and tach. I'm actually going to be putting sensors all over the car and writing software so that the lights and indicators actually display real data. That's a lot more effort than you see in these conversions, so I guarantee I won't finish first. ;)
I'm not sure about my buddy's either, I just sent him all the links and info I gathered, I think he'll just do a little at a time until it's complete! He aims to do the seats and carpets first I think.
D Knight
10-09-2013, 08:41 AM
22433heres mine from a few years ago.
-D Knight-
Mike C.
10-09-2013, 09:20 AM
My interior conversion is a LONG way off. I don't expect to even start on it until the middle of next year.
Since u will be taking your time with this, take more time and re-route yourself some AC vents and defrost vents!! Comfort goes a long way!!
ALEXAKOS
10-09-2013, 11:30 AM
22433heres mine from a few years ago.
-D Knight-
Friggin awesome!
The KITT dash has always been an impressive gadget looking cockpit. Especially when you're also an aviation enthusiast!
Next best thing to flying! Driving this makes you feel important!:wow:
DeMopar
10-10-2013, 12:17 AM
I gave $3,500 for my 83 Trans Am. The body and mechanicals were in pretty good shape, but I've had to do quite a bit of work on the interior to fix it up. From what I've seen a good 82-84 Trans Am runs $3,000-5,000, a really nice one will run about $7,500. A quick check on Hagerty's confirms this: http://www.hagerty.com/valuationtools/HVT/VehicleSearch/Report?vc=14099
Next there a few things you really need for the car to be "correct". And the Knight Rider purists will pretty much demand a "correct" car. A correct car will be a 1982-1984 Trans Am with an automatic transmission (with the 1982 shifter knob), correct light brown doeskin color interior, T-Tops and 15inch turbo cast rims with "bowling ball" hub caps. Sorry guys, but a car without T-tops will never be worth much as a Knight Rider replica (and consequently, non-T-Top Trans Ams aren't very desirable either). A set of used PMD seats will run you about $1,000, and another $500 to recover them (unless you happen to find some in mint condition). Almost all of the tan interior parts (particularly the plastic bits) are nearly impossible to find as they have all been snatched up by people making Knight Rider replicas. You can paint your plastic parts, but they won't have the same value as authentic tan plastic interior parts. A set of 4 15" Turbo Cast rims are going to run you about $1,000 if you can find them (once again, all snatched up by the Knight Rider replica making fans). Only the 1982 car had the right shifter knob, but those are pretty easy to find and change out. You can use a car that isn't an 82-84, but plan on swapping out many of the parts so they aren't correct which can add up quick. If you do the full working dash electronics consoles, etc that will cost a lot of dosh as well. The really nice Knight Rider replicas I've seen that were correct and complete can go for around $45,000.
Here is a picture of my 83 Trans Am:
22367
Awesome! I had an '84 (from '90-'93) that would be identical to yours except mine had the Aero Package (ground effects). Chris now has the tail lights from that car.
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.