PDA

View Full Version : Building A Lighted Scaled Down Dealership Sign



Michael
12-08-2013, 07:14 PM
I finally got to work on my home made dealership sign last week. Things are coming together so I thought I would share my build from start to finish. My goal was to build a scaled down version of the 11' dealership sign that was small enough to hang in my home office.

The reason I'm making this:

I have always liked the idea of converting the dealer signs for home use, however the signs were just way too big. They are also very heavy and very expensive, not to mention hard to move or work with. DMCMW answered this gap with their own version, and wow did it look nice. I'm certainly not knocking DCMW's sign, I'm sure it's a great product and is answering the call for a home version sign for a lot of people with large houses. My only complaint was they didn't take if far enough. At 6' it was still too big and I felt it would overpower all but the largest of spaces. I think if the intended purpose was a home version, it would need to be scaled down even further. Second, I think I can do it for much less $$. I am pretty sure I can get by for around 200 bucks. I also wanted this sign to be small enough to put in my car and display at cruise ins. My sign will operate on 12v DC or 110 AC. I can use either a small jump pack for power and hide behind the sign, or even use the cig. lighter in the car...most likely it will be self contained using the jump pack.

My first move was get a frame together, I soon realized that building a frame like I did with my wife's art project was not going to happen as I did not want to use wood. I wanted black anodized metal. I also wanted something smaller than DMCMW's sign so I settled on 46" by 12". This kept my proportions on track and my frame cost down. I went to an online poster frame store and did a nice custom sized frame up for $41.00 which includes shipping. This frame is 1" thick and I was originally going to get a "shadow box" frame which was 2.5" thick, but it would have been about 100 dollars and I decided since this was a prototype, and I wasn't sure if it would even work at all, I wanted to keep my risk low. Also this is a wall hanging, so thickness was not really key here anyway.

Second, lighting. I am still on the fence as to which type of LED's I will use. I did order a 5 meter strip of RGB's with power supply and color controller. This will grant me the power to make the sign any color I want and any brightness. I can even make them fade or flash in a pattern, of just stay constantly on. As a bonus, everything is controlled via wireless remote. I could use a simple single color LED strip, but the entire multi color LED light setup with remote and power supply was only $35.00 shipped, the simple 12 single color LED strips would have been almost the same cost.

Third, design. I drew up my design last night and that's where I'm at right now. I have all my measurements figured out and tomorrow morning I will take them down to a sign shop to have some masks cut. I decided it would be much easier to have vinyl graphics cut in a mirror design so I can use them as paint masks for the clear lexan which will be painted from the inside. I'm guessing approx. 50 dollars for this, maybe less if I can have these printed on a cheap adhesive paper and not vinyl. I will also hit Lowes tomorrow and pick up my lexan sheet and get it cut to shape. Once my graphics are done, I will start with painting, then move on to construction. Here are a few pics of the frame and light set.

234432344423445

vin6635
12-16-2013, 02:31 PM
Keep us posted! I've kicked this idea around in my mind many times as well.

Michael
12-17-2013, 07:41 PM
Keep us posted! I've kicked this idea around in my mind many times as well.

Will do! My graphics should be ready tomorrow, but I will not be able to pick them up until Thursday. I got my lexan from Lowes, so chalk up another 26 bucks for the project. I will cut it and hopefully have it painted by the weekend. I have to try a few things to figure out how to light it from the back...the goal is to have no hot spots from the individual SMD lights. That may require making a shallow light box, or heavy diffusion. I will not know until painting is finished.

Michael
12-18-2013, 06:53 PM
Graphics are here! Now I have all the pieces and all I have to do is put them together. The graphics cost 51 dollars and some change so I was very close on my estimate. The great thing was they didn't mirror the image, ( I'm using this as a reverse mask) so I had to wait a few minutes while they printed up a new one, then they asked if I wanted it picked and on transfer paper, which I did , so they made yet another one! They just gave me the two other images, so now I have three! 2 mirror images and one proper image to make even more DeLorean stuff with! The only down side is I told them color is not important so they used red. That's ok , red and black work together. Here is the final piece of the puzzle along with one of me for size reference...where the white hits the red border is the edge of the sign. You can't see it but the DMC text is outlined just like the real sign, but I told them to leave the solid part in place and I would pick it later since I want the DMC text to be a different color than the background.

23959 23958


Painting starts tomorrow evening!

GS450-Junkie
12-19-2013, 11:29 AM
I like the idea of the shadow box because it saves a lot of time. I was originally planning to venture out into the garage and fire up the aluminum welder, but it's been so cold here lately I can't leave the couch!!

rdarlington
12-19-2013, 02:08 PM
Hrm, I may borrow your artwork and machine this out of that big sheet of stainless I have out in the garage (no, I don't mean my hood)!

Yay for CNC.

-Bob

Michael
12-19-2013, 03:27 PM
I have the final rendering in a pdf the shop emailed to me. I will post it later.

Michael
12-19-2013, 09:40 PM
Finished painting and light blocking tonight. That decal is a bear to get on right the first time and be wrinkle free...I had to use one of my spare sheets to fix the DMC part. Then I learned the trick to it all. I know the real sign is bare grained metal, but I couldn't replicate that without going to a fab shop and shelling out some more money. I decided to paint top part painted in a dark silver to match the fascia color on the car. I believe the DMC letters are a mirror finish on the real sign and although I could replicate that, I felt a dark charcoal would look nicer. I am going to let the paint set up overnight before I apply the last few layers of white, (for light distribution). Everything that's red will be removed and illuminated. There is a protective clear layer over the sign that looks dull and dirty, but I'm leaving it in place until it's finished.

239632396423965




As far as the finished logo graphic, I tried to post a pic, but I cant get it from the pdf file and keep the resolution so I can email it to anyone that's interested if they want to make their own graphic.

DMCVegas
12-20-2013, 09:42 AM
Finished painting and light blocking tonight. That decal is a bear to get on right the first time and be wrinkle free...I had to use one of my spare sheets to fix the DMC part. Then I learned the trick to it all. I know the real sign is bare grained metal, but I couldn't replicate that without going to a fab shop and shelling out some more money.

Once when I made an Ertl BTTF model, I sprayed the body down with a few layers of silver and waited until it was past being tacky and mostly dry. Then I rubbed it down with some 0000 Steel Wool. It did an amazing job of creating an actual grain on the paint by cutting it, and the paint was thick enough that it didn't go down to the primer thanks to the multiple layers. 0000 was perfect for the 1:24 scale I was using, so for something larger you might need a rougher wool. It might be something to consider.

NightFlyer
12-20-2013, 03:42 PM
Nice framed Star Trek The Motion Picture poster - I have a similar one myself!

Sign is looking awesome! If you're concerned about LED hotspots, you may want to consider using EL as a back light instead.

Michael
12-20-2013, 04:00 PM
Once when I made an Ertl BTTF model, I sprayed the body down with a few layers of silver and waited until it was past being tacky and mostly dry. Then I rubbed it down with some 0000 Steel Wool. It did an amazing job of creating an actual grain on the paint by cutting it, and the paint was thick enough that it didn't go down to the primer thanks to the multiple layers. 0000 was perfect for the 1:24 scale I was using, so for something larger you might need a rougher wool. It might be something to consider.

I could "texture" the paint, but remember this is being painted from the inside. I considered doing just what you described, followed by a black backing to make the grain stand out. I don't want to use any untested techniques here especially considering the cost of the mask. After all, it will look just as nice being "fascia gray"


Nice framed Star Trek The Motion Picture poster - I have a similar one myself!

Sign is looking awesome! If you're concerned about LED hotspots, you may want to consider using EL as a back light instead.

Thanks, I have a few different measures. I bought a white opaque ceiling light panel which I will use if the frost spray doesn't work. I may build light boxes as well if I have the room. I don't want to use EL, I want it to be bright. Also my LED strips give me unlimited color choices and brightness levels.

Michael
12-27-2013, 04:21 PM
I was finally able to finally put everything together today. Even though everything was just there on the bench waiting for me, I had so much going on lately I couldn't even spare a few hours to wire it up and assemble it. It looks so much better than the fender I had hanging on the wall and makes a perfect center piece for my DeLorean shrine. The total costs are as follows:

Frame: 41.00
LED lights with remote controller and Power Supply: 35.00
Diffuser panel (ceiling light panel): 9.00, and enough was left to make a back panel as well to mount the electronics on.
Graphics for paint masks: 51.00
Clear lexan for front: 21.00
Spray Paint: 20.00

Total: $177.00

So I came in well below my projected cost of $200.00. I still want to diffuse it even further to make the lights as smooth as possible, but it looks fine as is. I may remove the front plate and spray some more frost on the back side. I was afraid I would wash out the colors if I diffused too much, but after seeing it together, I know that will not be a concern. The sign is controlled via remote control and can be made to any color, brightness, or intensity I want. It also has user selectable animations and speed control. It's not something I would necessarily have to have, but being this kit was only 5 dollars more than a single color kit pretty much made that decision a no-brainer. I'm also going to wire up a Cig. lighter plug for it so I can take the sign to car shows. I can run it from the lighter socket in my car, or the socket on my jump pack.

240752407624077240782407924080

DMC5180
12-27-2013, 05:03 PM
Nice!

Wow 2 pairs of Nike Dunks!

Domi
12-27-2013, 05:08 PM
Wonderful job on that sign, I like it :thumbup:

Michael
12-27-2013, 07:04 PM
Wow 2 pairs of Nike Dunks!

Not quite, keep counting :wink:

DMC5180
01-01-2014, 05:19 PM
Not quite, keep counting :wink:

Ok, I see 5 shoes so I guess that means 3 pairs.

Michael
01-02-2014, 05:57 PM
Ok, I see 5 shoes so I guess that means 3 pairs.

I never set out to own 3 pairs of Dunks. The first pair I got from a employee of Pacsun..I called them and spoke to an employee. I sent her an extra 20 bucks and she shipped them to me, (no waiting in line or cruising the website at midnight). Anyway, Mike of DMCTalk put up a pair of new ones for really cheap, 125.00 I think, so I couldn't refuse that deal...which gave me an excuse to wear a pair. A few weeks later, I saw a press release pair, with gull wing box and info card with a buy it now of 225 I think, somewhere between 200.00 and 275.00, so I had no choice but to snag those as well! I recently saw a pair of press release Dunks go for 1500.00 on eBay, there is another pair for sale right now, so I'm just waiting for the right moment.

OverlandMan
01-02-2014, 06:19 PM
Wow! An office-sized wall mounted illuminated dealer replica sign for under $200 in parts... I'm impressed. This looks like something a vendor would easily charge $500-$1k for.

Any idea how many amps the sign draws? Curious after you mentioned wiring in a 12V DC plug for use @ shows. I would think it would be minimal seeing as these are LED lights.

Michael
01-02-2014, 06:51 PM
Wow! An office-sized wall mounted illuminated dealer replica sign for under $200 in parts... I'm impressed. This looks like something a vendor would easily charge $500-$1k for.

Any idea how many amps the sign draws? Curious after you mentioned wiring in a 12V DC plug for use @ shows. I would think it would be minimal seeing as these are LED lights.

The current draw on these depends on what color you have selected and the brightness level, as well as how many you are using. Probably the highest would be white at full bright since all three colors are used. I would guess in the neighborhood of 2A per meter. In short, current draw is insignificant for home use. The transformer provided is just like any wall part, its using power just by being plugged in, sign on or not.

I used a little over 4 meters of RGB strips for this sign. The led kit I ordered came with everything, power supply, remote, driver. All I needed to do was cut, wire and turn on.

Really, as long as you are using the proper resistor, any voltage above the amount required would work. These strips are pre resisted for 9-12v. I think its just the standard in these 5050 strips.