Log in

View Full Version : First test drive experience



Rich_NYS
12-09-2013, 04:50 PM
I had my first DeLorean driving experience this past weekend; I test-drove a car for sale that I've been looking at. It's an '82 auto that recently came out of storage. I was able to get some photos in advance, as well as a bunch while I was there. The car runs, but has a gas leak, the owner had to add fuel while[I was there] so I could drive it.

It ran OK, but has an exhaust manifold leak and valve train noise. The interior looked/felt kinda beat and seems to be coming apart everywhere, but I still enjoyed the feeling of being in the car. -It felt somewhat like getting into a cockpit, I guess.

I took notes & pics, and brought with me the Buyers Guide I bought recently. I'll be in contact with the owner again soon, but regardless of how I proceed from here, it was a very good experience and I feel like I gaind some knowledge. I posted some pics to share my enthusiasm with anyone interested to see some details of the car.

Special thanks to NightFlyer and Jonathan for giving so much of their time to help me throughout the process. It might not seem like much to everyone here who already has a D, but it made a helluva big difference to a guy like me who was looking at one for the very first time. I very soon will be in the ranks and will pass along the same to a new member.

I have a list of things to consider with this particular car, but a decision I was easily able to make: I will definitely be buying a DeLorean...




BTW, if anyone has info on where to find the pre-inspection checklist (referred to in the Buyer's Guide,) please let me know.


23453234542348423456234572345823459234602346123462 23463234642346523466234672346823469234702347123472 23473234742347523476234772347823479234802348123482 23483

rdarlington
12-09-2013, 05:13 PM
BTW, if anyone has info on where to find the pre-inspection checklist (referred to in the Buyer's Guide,) please let me know.



http://www.perotti.nl/delorean/download/vir.pdf

I think that's the one you're looking for.

That car needs a significant amount of cosmetic work. I'd guess at least $10k worth to get it looking good. I have no way to check out the engine or transmission but that could easily double that figure. What's your budget? What's the guy asking?

-Bob

OverlandMan
12-09-2013, 05:20 PM
Thanks for sharing. I see lots of jobs to do on this car but nothing that makes me run for the hills. The frame rust is a little concerning... hard to tell if prior rust damage has been covered-up or if this is just some light surface rust.

Good luck on your search.

NightFlyer
12-09-2013, 06:01 PM
http://www.perotti.nl/delorean/download/vir.pdf

I think that's the one you're looking for.

That car needs a significant amount of cosmetic work. I'd guess at least $10k worth to get it looking good. I have no way to check out the engine or transmission but that could easily double that figure. What's your budget? What's the guy asking?

-Bob

The only way it would take $10k to whip that car into shape is if you you were hiring everything out instead of doing the work yourself!

The only job needed that requires specialized skills would be the repair of the ss fender panel (which is definitely repairable), otherwise everything else ranges from simple to a low-moderate difficulty level. More than anything else, it's a matter of how much of one's time/effort/labor do you want to commit to the project and how far do you want to take the car.

I estimated $4k max in parts/materials expenditure based on an itemized listing of issues (and that includes assumptions that somethings will need replacement as opposed to mere repair, so that figure could actually turn out to be as low as $3k if you're able to make repairs instead of having to replace) would get the car into 95%+ condition.

This of course assumes that the frame is OK and only requires a 'touch up' job, as opposed to major repair work.

And assuming that the frame is OK, it would also be difficult to lose any money on this car IMHO, unless of course you were going to hire everything done.

Like nearly any project DeLorean is going to be, it all depends on how you're going to approach the restoration (do the work yourself or hire it out) and how far you want to take the restoration.

NightFlyer
12-09-2013, 06:06 PM
Thanks for sharing. I see lots of jobs to do on this car but nothing that makes me run for the hills. The frame rust is a little concerning... hard to tell if prior rust damage has been covered-up or if this is just some light surface rust.

Good luck on your search.

There's definitely a frame issue on this car, but it appears to be limited to the area of the front extension (which isn't that surprising) - but the extent of it really isn't clear. It sounds like the owner was open about the frame issues, so it might not be all that bad. It could be a deal-breaker, but could also be as simple as merely 'cleaning up' a prior repair that wasn't finished very well. Further inspection of the frame is definitely required before making an intelligent decision.

DeLorean03
12-09-2013, 06:43 PM
This looks decently similar to what I started with when I bought my DeLorean - minus the stainless steel damage.

This is an excellent vehicle to start with - considering if the vehicle does start and run. I say see what he wants, determine what you're ready to pay, and meet in the middle.

Don't worry/freak out too much about the frame rust. Nearly everything is repairable. For example, look at the frame rust I have - Eddie is cutting this portion of the frame out and welding in a new piece. But still - drove it for 8-10 years, and it's finally being addressed Jan-Feb 2014:


http://dmctalk.org/album.php?albumid=80

I had whole CHUNKS of my frame missing in the middle, and I was able to ZeroRust it, stop it pretty well, and drove it for 2 more years before the car went to Eddie where it is being addressed this Spring 2014. Granted, I baby my car and drive it for fun/gently - no silly show off driving, and I made it more of a weekend car. If this is going to be an everyday driver, frame rust is far more of a concern.

rdarlington
12-09-2013, 07:04 PM
The only way it would take $10k to whip that car into shape is if you you were hiring everything out instead of doing the work yourself!

The last thing I want to do is discourage somebody, but it adds up quick:

http://store.delorean.com/c-311-8-4-3-engine-compartment-cover-upper.aspx $635
http://store.delorean.com/p-9824-knee-pad-center-grey.aspx $174
http://store.delorean.com/p-9814-dash-pad-gray.aspx $299
http://store.delorean.com/p-10248-weatherstripping-kit.aspx $295
http://store.delorean.com/p-9998-set-seat-cover-grey.aspx $599
http://store.delorean.com/p-9053-slide-auto-quadrant.aspx $10
http://www.specialtauto.com/delorean-parts/accessories.html - binnacle - $280
http://www.specialtauto.com/delorean-parts/accessories.html - carpet - $549.95
http://www.delorean.eu/catalog/product_info.php?cPath=19_31_120&products_id=120033&osCsid=db78e20275975180e1f92a4b7ea07d55 $$$$
http://www.specialtauto.com/delorean-parts/modifications.html - Fuse box kit - $120 (I see evidence of burning in yours).
http://store.delorean.com/p-7279-tie-rod-end.aspx - $50

This totals to over $3000 and that does NOT include the fender repair (probably another $1000, because this is the one made out of that special stainless and unobtainium alloy)! It also does not include any labor. It also was just the low hanging fruit and does not at all look at any engine issues, suspension, frame, or other.

Unless you want a project car, I recommend passing. Now, if you do want a project car, this is the perfect one. At first glance it doesn't look like anything major and you can use the above shopping list to buy stuff as the paychecks come in.

No matter what, best of luck to ya!

-Bob

NightFlyer
12-09-2013, 07:20 PM
The last thing I want to do is discourage somebody, but it adds up quick:

http://store.delorean.com/c-311-8-4-3-engine-compartment-cover-upper.aspx $635
http://store.delorean.com/p-9824-knee-pad-center-grey.aspx $174
http://store.delorean.com/p-9814-dash-pad-gray.aspx $299
http://store.delorean.com/p-10248-weatherstripping-kit.aspx $295
http://store.delorean.com/p-9998-set-seat-cover-grey.aspx $599
http://store.delorean.com/p-9053-slide-auto-quadrant.aspx $10
http://www.specialtauto.com/delorean-parts/accessories.html - binnacle - $280
http://www.specialtauto.com/delorean-parts/accessories.html - carpet - $549.95
http://www.delorean.eu/catalog/product_info.php?cPath=19_31_120&products_id=120033&osCsid=db78e20275975180e1f92a4b7ea07d55 $$$$
http://www.specialtauto.com/delorean-parts/modifications.html - Fuse box kit - $120 (I see evidence of burning in yours).
http://store.delorean.com/p-7279-tie-rod-end.aspx - $50

This totals to over $3000 and that does NOT include the fender repair (probably another $1000, because this is the one made out of that special stainless and unobtainium alloy)! It also does not include any labor. It also was just the low hanging fruit and does not at all look at any engine issues, suspension, frame, or other.

Unless you want a project car, I recommend passing. Now, if you do want a project car, this is the perfect one. At first glance it doesn't look like anything major and you can use the above shopping list to buy stuff as the paychecks come in.

No matter what, best of luck to ya!

-Bob

1) Doesn't need one - the louver on the car is fully repairable.
2) Doesn't need one - the existing one just needs to be cleaned.
3) Included in my estimate, although the existing one may be repairable/salvageable.
4) Included in my estimate, although not the DMCH price.
5) Average price of all available options was used in my estimate.
6) Included in my estimate, although one can just as easily source suitable material locally for a couple bucks.
7) Included in my estimate.
8 ) Doesn't need it - existing carpet appears to be cleanable to an acceptable state. Could even re-dye if desired, but doesn't appear necessary.
9) The fender on the car is repairable - why on earth would you get a new one? Cost of repair used in estimate was $700.
10) Included in estimate at the DMCH price of $80.
11) Not sure that a tie-rod end is needed - existing appears and operates just fine.

Materials needed to perform repairs were included in my estimate.

If you're going to go through and replace all wear items just for the sake of having new (even thought the existing is fine), and replace parts that could be repaired/cleaned/restored with reasonable effort and minimal materials investment, then of course you're going to wind up with a much bigger bill.

All depends on how far you want to take the restoration.

DeLorean03
12-09-2013, 07:25 PM
The interior is NOT the area to be so concerned with. I'd be making sure this car is driveable and safe before I worried one second on the interior.

The LFF is all I'd be focused on for the exterior in the immediate future, and with Chris Nicholson coming to DCS 2014, that is simply a waiting game. Or, he could send it to PJ Grady Europe and have Chris fix it now. The louvres could be repaired when some practice/experience in fiberglass repair.

Jimmyvonviggle
12-09-2013, 08:38 PM
I also agree that while everyone is eager to get to cosmetics, they aren't as important as the basics. The fuse area is a red flag with melted spots and other fast fixes present. As well as what looks like rat nests or something. And then there is the unknown or unseen that will pop up. Of course it comes down to price.

Rich_NYS
12-09-2013, 10:49 PM
http://www.perotti.nl/delorean/download/vir.pdf

I think that's the one you're looking for.

That car needs a significant amount of cosmetic work. I'd guess at least $10k worth to get it looking good. I have no way to check out the engine or transmission but that could easily double that figure. What's your budget? What's the guy asking?

-Bob

Thanks Bob, it looks useful but I don't think it's the one from the book. The book shows a "Pre-Purchase Inspection Guide" and says that it's on deloreanguide.com, but I'm not finding it there.

The owner is asking $14K, my budget is above that.




Thanks for sharing. I see lots of jobs to do on this car but nothing that makes me run for the hills. The frame rust is a little concerning... hard to tell if prior rust damage has been covered-up or if this is just some light surface rust.

Good luck on your search.

I think the frame might've rusted from being on the road in the Winter and was exposed to road salt. I can imagine the tiniest crack in epoxy paint being infiltrated by the ridiculous amount of salt used on NY roads.





Like nearly any project DeLorean is going to be, it all depends on how you're going to approach the restoration (do the work yourself or hire it out) and how far you want to take the restoration

Exactly the mindset I have. With this one, I'd need to hire out the most time-consuming stuff.






This looks decently similar to what I started with when I bought my DeLorean - minus the stainless steel damage.


http://dmctalk.org/album.php?albumid=80

I had whole CHUNKS of my frame missing in the middle, and I was able to ZeroRust it, stop it pretty well, and drove it for 2 more years before the car went to Eddie where it is being addressed this Spring 2014. Granted, I baby my car and drive it for fun/gently - no silly show off driving, and I made it more of a weekend car. If this is going to be an everyday driver, frame rust is far more of a concern.

Wow....that's pretty rusty! This one isn't like that at all.

I'd only be driving it on nice weekends, but ultimately would be selling it to get a manual-shift in nice condition. I really only looked at this one for the experience of becoming as informed as possible, but always ready to spot a good deal as well.







Unless you want a project car, I recommend passing. Now, if you do want a project car, this is the perfect one. At first glance it doesn't look like anything major and you can use the above shopping list to buy stuff as the paychecks come in.

No matter what, best of luck to ya!

-Bob

Thanks!

Rich_NYS
12-11-2013, 12:02 AM
Man, the things I could've done in a former life! I used to live in the same town as my parents where my Dad owned a repair shop for 30+ years. The shop is still there, recently closed & still fully equipped. Years ago I could spend every night & weekend I wished, with access to tools, shop equipment and a lift. A car like this one would be well on its way by now, but I digress...LOL! :cool: