Log in

View Full Version : Unobtainium: Rare or Extinct DMC Parts & Components



sdg3205
02-22-2014, 02:59 PM
With Josh's predictions on the inevitable death of K-jet due to NLA components, I thought it would be neat to have a thread dedicated to those (parts) we've lost over the years, or parts we're on the verge of loosing completely. We can also discuss ideas as to obtaining said parts from other sources, or creating new ones, etc. These would be parts that don't necessarily have a clear "cross over" list alternative like a belt, oil filter etc.

Here goes:

- the holy grail: Left front fender
- frames
- OEM clock (several alternatives out there - SAOT)
- OEM shift knob (SAOT)
- Binnacles (recovers available, or Steve's fiberglass builds)
- seat backs
- rear engine cover latch
- centre consoles
- centre console arm rests
- Rh escutcheon
- matching OEM tire sizes
- LH torsion bar (Byrne sells an alternative)
- LCA's (DPI and Byrne sell alternatives)
- roof box/engine cover latch closing plates - these things are still available, but so rare their prices are insane (http://store.delorean.com/p-9652-access-panel.aspx).
- LH rear trim panels (in both grey and black) are non existant.
- seat slide bar components
- seat tilt mechanism & black plastic shield trim
- rear fascia closing panel

… more will come to me.

MML
02-22-2014, 03:30 PM
- roof box/engine cover latch closing plates - these things are still available, but so rare their prices are insane (http://store.delorean.com/p-9652-access-panel.aspx).
.

108 dollars for a small metal plate?? Yikes!! Those could be made very easily by anyone with a laser/waterjet cutter.
Not something to worry about in future, in other words.

Delorean Industries
02-22-2014, 06:02 PM
We sell the closing plates

http://delorean.gostorego.com/original-stainless/frame-body/access-panel-fascia-closing-panel-stainless.html


Frames will be done by June fingers crossed

Seat backs are in stock as well

Delorean Industries
02-22-2014, 06:04 PM
On the access panel part.

I throw two away per car here. Usually in great condition. DMC prices dictate nothing........

Jonathan
02-22-2014, 06:47 PM
Some that came to mind in addition to the ones Dave mentioned:

- Catalytic convertor heat shield
- Handling by Lotus Emblem
- Auto trans shift computers (complete with harness, rebuilds available as far as I know, but supplies are dwindling each time a core gets ruined/melted)
- Auto trans fluid filters
- Brake calipers (not sure if a legitimate replacement is available without reusing your core)
- A couple of the particular sizes for the seat belt bolts (bolts attaching retracting unit or receptacle to frame)
- Ignition switches (lighted key blanks too I believe)
- Mode control switches (HVAC panel. Rebuild kits only available)
- Slide release bars for seats (as Dave eluded to)
- Muffler bracket RH
- Door adapter (rubber item for air flow to door)

Rich
02-22-2014, 08:31 PM
Nice lists so far. Thanks.

As for the driver side (LH) torsion bar there are listings from both Hervey and DMOCO.

Do we know if this is current and for real?
https://www.specialtauto.com/delorean-parts/images/delorean-torsion-LH.jpg
https://www.specialtauto.com/delorean-parts/frame-body.html

And same question for DMOCO's bar - current?
http://www.dmoco.com/Torsion.html

DMCVegas
02-22-2014, 08:35 PM
I've seen plenty of Left Fenders over the years. There was also a stash of them up in NLV a few years ago. Dented, but workable.

What I'm looking for is the damn Ski Adaptors. Of those I've only ever seen 2 for sale on eBay.

louielouie2000
02-22-2014, 09:41 PM
- Auto trans fluid filters

This is eye opening- what are auto DeLorean owners doing to get around this? I didn't realize we are now entering into a time where some consumables aren't available.

Delorean Industries
02-22-2014, 09:47 PM
This is eye opening- what are auto DeLorean owners doing to get around this? I didn't realize we are now entering into a time where some consumables aren't available.

DPI offers a in line solution integrated into the cooler line to our custom cooler. While it isn't "off the pan" it is better than nothing and most definitely picks up debris.

Totally 80s
02-22-2014, 10:05 PM
With Josh's predictions on the inevitable death of K-jet due to NLA components, I thought it would be neat to have a thread dedicated to those (parts) we've lost over the years, or parts we're on the verge of loosing completely. We can also discuss ideas as to obtaining said parts from other sources, or creating new ones, etc. These would be parts that don't necessarily have a clear "cross over" list alternative like a belt, oil filter etc.

Here goes:

- the holy grail: Left front fender
- frames
- OEM clock (several alternatives out there - SAOT)
- OEM shift knob (SAOT)
- Binnacles (recovers available, or Steve's fiberglass builds)
- seat backs
- rear engine cover latch
- centre consoles
- centre console arm rests
- Rh escutcheon
- matching OEM tire sizes
- LH torsion bar (Byrne sells an alternative)
- LCA's (DPI and Byrne sell alternatives)
- roof box/engine cover latch closing plates - these things are still available, but so rare their prices are insane (http://store.delorean.com/p-9652-access-panel.aspx).
- LH rear trim panels (in both grey and black) are non existant.
- seat slide bar components
- seat tilt mechanism & black plastic shield trim
- rear fascia closing panel

… more will come to me.

This will be a great list for any thieves. Make their job a lot easier.

DeLoreanman
02-22-2014, 11:02 PM
We sell the closing plates

http://delorean.gostorego.com/original-stainless/frame-body/access-panel-fascia-closing-panel-stainless.html


Frames will be done by June fingers crossed

Seat backs are in stock as well

Will these be the tubular frames or have you gone in another direction?

Jonathan
02-22-2014, 11:10 PM
This is eye opening- what are auto DeLorean owners doing to get around this? I didn't realize we are now entering into a time where some consumables aren't available.

I don't know the whole history on the filters, but I think it goes back a number of years. It is mentioned in this thread here:

http://dmctalk.org/showthread.php?8056-Engine-oil-and-ATF-change-together-or-separate&p=118831&viewfull=1#post118831

And Ron gives a couple links to a write-up on DMCNews:

http://dmcnews.com/Techsection/autotransfilter.html

Basically the solution is to take them apart and clean them. Not nearly as simple as replacing it, but not a deal breaker.

sdg3205
02-23-2014, 04:51 AM
This will be a great list for any thieves. Make their job a lot easier.

You're kidding, right?! Because a thief would stock a Delorean owner and remove the LFF while he slept?

GS450-Junkie
02-23-2014, 10:05 AM
You're kidding, right?! Because a thief would stock a Delorean owner and remove the LFF while he slept?

Jump over to the other forum and ask DRACULA about this. I believe when he found his car the next morning his front grill was gone, and the LFF was about 1/2 way removed.


Add kneepads to the list.....

sdg3205
02-23-2014, 02:31 PM
Jump over to the other forum and ask DRACULA about this. I believe when he found his car the next morning his front grill was gone, and the LFF was about 1/2 way removed.


Add kneepads to the list.....

I stand corrected. The front grille doesn't surprise me, in fact I'm surprised mine hasn't been stolen yet. But the LFF, wtf?! talk about niche thievery.

Totally 80s
02-23-2014, 03:00 PM
You're kidding, right?! Because a thief would stock a Delorean owner and remove the LFF while he slept?

I know others have had the shift ball stolen at car shows when the doors were open. So no I'm not kidding, and don't call me Shirley.

Totally 80s
02-23-2014, 03:02 PM
So with all these K-Jet parts getting expensive or difficult to find I guess we will soon be all switching to carbs?

sdg3205
02-23-2014, 03:21 PM
So with all these K-Jet parts getting expensive or difficult to find I guess we will soon be all switching to carbs?

Issac Assimov always believed that technology would prevail over peril - or in this case, the demise of K-jet components. I'm hoping that's the case for us. I don't want a carb and though EFI has it's appeal, I'm hoping there are enough originality sticklers out there to provide the demand for products to keep K-jet operating. Though owning a DeLorean is a luxury, IMHO, we're so damn lucky when it comes to parts and prices. As inventory declines, the other shoe will drop for those who want originality. We saw this last year when DMCH boosted prices by 20%, which still keeps them at a level cheaper than parts for my 2000 Jeep Wrangler.

If Josh has the schematics for the CPR and has looked into the capacity to provide injectors at $100/pop that's what I consider good news. Will I be able to keep restoring new barn finds? Probably not, but my personal car will stay on the road.

My point I guess is that I hope new technology will enable us to keep k-jet running for another 50 years. When you look at what the entire system consists off, we can already replace massive amounts of it:

- pump/seder
- all fuel lines
- filer
- distributor rebuilds
- copper washers
- accumulators (I think?)
- CSV's (I think?)

so that leaves at risk:

- FV's
- CPR's
- injectors

Correct me if I'm wrong.

Totally 80s
02-23-2014, 05:55 PM
Why would a carb be bad? To me the carb is a superior option to the K-Jet. Much easier to service, much easier to fix, clean looking, cheaper to fix, easy access to spark plugs, distrubuter etc.

Only negative I know of a carb over K-Jet is a little poorer fuel economy.

If I knew I could buy a complete bolt on carb conversion for a reasnable price I would have no problem converting. Especially if parts like frequency valves were $300-$400.

I think you should add WUR to the list. Those suckers are very expensive now and hard to get.

sdg3205
02-23-2014, 05:58 PM
Alex,

I never said anything negative about carbs, just that I don't want one.

If you head over to DMCToday, you'll find Capt. Carb himself (bill roberston) who does provide carb kits!

EDIT - at least he used to.

Totally 80s
02-23-2014, 06:16 PM
Alex,

I never said anything negative about carbs, just that I don't want one.

If you head over to DMCToday, you'll find Capt. Carb himself (bill roberston) who does provide carb kits!

EDIT - at least he used to.

I know almost nothing about carb swaps. Is there anything besides the poorer fuel economy that make carbs a bad choice? Does it mess anything up in the car? Make something not work (like the tach)?

Patrick C
02-23-2014, 06:34 PM
It looks as though the center console change trays cannot be purchased either.

Jonathan
02-23-2014, 06:42 PM
The transmission fluid change thread reminded me there is one of the misc seals for installing the shift computer connections that is NLA. You reuse the one you have (the seal that is).

There is someone out there that has steering column canopies now, right? Weren't those NLA for a while? The upper and lower plastic halves that is.

Were the rear interior panels mentioned already? Of the colour/armrest style combinations for both driver and passenger sides, I don't think replacements for all of those are available either.

The carpet piece that covers the base of the parking brake level... I think we're SOL on those as well.
Battery straps?

Michael
02-23-2014, 07:25 PM
Why would a carb be bad? To me the carb is a superior option to the K-Jet. Much easier to service, much easier to fix, clean looking, cheaper to fix, easy access to spark plugs, distrubuter etc.

Only negative I know of a carb over K-Jet is a little poorer fuel economy.

That and they have a tendency to turn you into an online douche once you have it installed.

Bitsyncmaster
02-23-2014, 07:53 PM
There was someone selling an electronic WUR a few years back. Not sure if that is still available but the price of $500 did not create much interest with the D.

DMC5180
02-23-2014, 10:00 PM
There was someone selling an electronic WUR a few years back. Not sure if that is still available but the price of $500 did not create much interest with the D.

I believe Wilmed played around with one but did not have much luck with it.

Totally 80s
02-23-2014, 10:36 PM
That and they have a tendency to turn you into an online douche once you have it installed.

What does this mean? Are we talking about a member here? Or someone who is no longer a member and can't defend him or herself? Or are you saying I'm a douche?

DeLorean03
02-23-2014, 11:02 PM
Don't forget about the steering column black upper and lower covers that screw together. They cover the ignition switch if I recall correctly.

Ryan King
02-24-2014, 01:44 AM
What does this mean? Are we talking about a member here? Or someone who is no longer a member and can't defend him or herself? Or are you saying I'm a douche?

I believe he is referring to Bill Robertson. I actually really like Bill and don't find him to be a douche at all.

sdg3205
02-24-2014, 02:09 AM
OEM early grey castings and centre caps

steve
02-24-2014, 10:12 AM
The handling by Lotus badge where might it have gone on the car?
I have one but it is loose in the box of PARTS.

Steve

louielouie2000
02-24-2014, 10:27 AM
The handling by Lotus badge where might it have gone on the car?
I have one but it is loose in the box of PARTS.

Steve

That's not something DeLoreans came with, but something owners have been slapping on their cars the past 2 decades or so. I've seen them all over: below the faux B-pillar vents, in the door jambs, engine compartment, interior, etc.

DMCVegas
02-24-2014, 10:40 AM
What does this mean? Are we talking about a member here? Or someone who is no longer a member and can't defend him or herself? Or are you saying I'm a douche?

It's a long story, but the short version is that rather than simply discussion carbs as a viable option in a friendly, sensible manner, the biggest proponent of carburetors would instead troll others to anger them as he thought it was funny. It wasn't simply a discussion as a modification, but a chance to consistently throw out inflammatory remarks about anything that would provoke a response, and the argument would escalate further and further until this person would finally get others to crack. He would then comment about how funny this was to him, and how he was just trolling all along, and actually had many supporters on his side. These were people whom he helped out, but had not yet gotten on his bad side and encountered his wrath. And for those that did, they would eventually come to see what we had been talking about.

So the sum it up, the DeLorean community as a whole doesn't, and never did have a problem with carburetors. I like many others welcomed the discussion about them as a way to get more cars on the road, if not to become an contingency plan in case K-Jetronic ever went away. It's just that while there were/are misconceptions on both sides about the whole affair, the idea of carbs was given a bad reputation already by a handful of people who acted like absolute dicks to everyone because they thought upsetting others was amusing.

Totally 80s
02-24-2014, 10:44 AM
So if I needed a frequency valve today, and I wanted a brand new one, where do I buy it from?

Rich
02-24-2014, 01:54 PM
So if I needed a frequency valve today, and I wanted a brand new one, where do I buy it from?

Maybe a new one is available here:
http://www.autopartsfair.com/volvo-engine_parts/260-1982-fuel_injection-c2020_12971bos_3.html
http://www.autopartsfair.com/bmw-engine_parts/320-1983-fuel_injection-c2020_12971bos.html

Somebody practiced in the art could perhaps check the Bosch P/N to see if it's a cross. Sure looks the same as ours in the images. There are lots of K-Jet systems on lots of cars in need of new parts, so one would expect some level of supply but perhaps not indefinitely.

Frequency Valve

0.280.150.300
C2020-12971

Totally 80s
02-24-2014, 03:00 PM
Maybe a new one is available here:
http://www.autopartsfair.com/volvo-engine_parts/260-1982-fuel_injection-c2020_12971bos_3.html
http://www.autopartsfair.com/bmw-engine_parts/320-1983-fuel_injection-c2020_12971bos.html

Somebody practiced in the art could perhaps check the Bosch P/N to see if it's a cross. Sure looks the same as ours in the images. There are lots of K-Jet systems on lots of cars in need of new parts, so one would expect some level of supply but perhaps not indefinitely.

Frequency Valve

0.280.150.300
C2020-12971

Odd that these would work but SpecialT and dmch don't carry them on their website. Can anyone confirm that these FQ valves would work on the Delorean?

Michael
02-24-2014, 03:28 PM
Odd that these would work but SpecialT and dmch don't carry them on their website. Can anyone confirm that these FQ valves would work on the Delorean?

If Rich's word isn't good enough for you then maybe you ccould get off your ass and do your own research.

Totally 80s
02-24-2014, 03:49 PM
If Rich's word isn't good enough for you then maybe you ccould get off your ass and do your own research.

Rich's word? He said he didn't know? He thought they looked like ours. That's as far as it went. He even asked in his post the same thing I did, Perhaps someone could verify the numbers.

Can you imagine every time somebody had a question on this website we responded with "Get off your ass and do your own research."

Where is this hostility coming from? First you call other members a douche and now this?

This is a thread about unavailable parts, so we are talking about unavailable parts.

Jonathan
02-24-2014, 03:53 PM
I thought of another one:

A DeLorean forum thread that doesn't get ugly after a few pages.

....hehe, j/k.... group hug!!!! :)

DMCVegas
02-24-2014, 03:54 PM
There was someone selling an electronic WUR a few years back. Not sure if that is still available but the price of $500 did not create much interest with the D.

They're still available. In essence they replace the Frequency Valve, because the last thing you really want are two closed-loop systems fighting to control fuel mixture.... They do also offer a version that will work with turbo chargers to enrich the mixture under boost as well.



Issac Assimov always believed that technology would prevail over peril - or in this case, the demise of K-jet components. I'm hoping that's the case for us. I don't want a carb and though EFI has it's appeal, I'm hoping there are enough originality sticklers out there to provide the demand for products to keep K-jet operating. Though owning a DeLorean is a luxury, IMHO, we're so damn lucky when it comes to parts and prices. As inventory declines, the other shoe will drop for those who want originality. We saw this last year when DMCH boosted prices by 20%, which still keeps them at a level cheaper than parts for my 2000 Jeep Wrangler.

There is absolutely hope. Whenever I think of running out of parts for my DeLorean, I keep these people in mind and sleep well:

http://hankinsonholmes.files.wordpress.com/2013/03/p1030532.jpg

It's been half a century of poverty and embargo, and a few Russian diesels, yet these damn cars are still on the road. If generations of Cubans can keep their same family cars on the road, I've got no worries about my DMC-12.

Totally 80s
02-24-2014, 04:00 PM
I thought of another one:

A DeLorean forum thread that doesn't get ugly after a few pages.

....hehe, j/k.... group hug!!!! :)

Right? Where did the hostility even come from? The conversation was getting very interesting.

sdg3205
02-24-2014, 04:21 PM
In regards to the FV:

Like a lot of NLA or "$0.00" parts on the DMCH site, a quick email or call to a DMC vendor will quickly let you know they MIGHT have used ones available.

I hoard used/usless parts, and I think vendors do as well.

I contacted Toby this weekend because I need an NLA fuel baffle bottom - Toby has a bunch.

I've also bee able to obtain good used RH floor carpeting, OEM black seat covers as well as a handful of other NLA parts just by calling DMCNW.

Parts might be NLA according to DMCH's site, so I'd suggest those are RARE, but not test extinct.

Upgrades are going to free up some good used parts as well as people upgrade fuel tank pumps, upgrade to EFI or switch to carbs etc. Opethmike had a ton of good k-jet stuff for sale about a year ago IIRC.

Totally 80s
02-24-2014, 04:33 PM
In regards to the FV:

Like a lot of NLA or "$0.00" parts on the DMCH site, a quick email or call to a DMC vendor will quickly let you know they MIGHT have used ones available.

I hoard used/usless parts, and I think vendors do as well.

I contacted Toby this weekend because I need an NLA fuel baffle bottom - Toby has a bunch.

I've also bee able to obtain good used RH floor carpeting, OEM black seat covers as well as a handful of other NLA parts just by calling DMCNW.

Parts might be NLA according to DMCH's site, so I'd suggest those are RARE, but not test extinct.

Upgrades are going to free up some good used parts as well as people upgrade fuel tank pumps, upgrade to EFI or switch to carbs etc. Opethmike had a ton of good k-jet stuff for sale about a year ago IIRC.

I know John @ specialt has used ones for sale. I was curious about new. Gotta say, it makes me a little nervous when engine parts are no longer available (brand new). Knee pads and coin trays don't bother me. Vital engine pieces do.

Rich
02-24-2014, 04:55 PM
I know John @ specialt has used ones for sale. I was curious about new. Gotta say, it makes me a little nervous when engine parts are no longer available (brand new). Knee pads and coin trays don't bother me. Vital engine pieces do.

Agree, and we'll see if the FV cross-referenced parts supply is any good, the one I queued up a few posts back.

If one opens up the first parts catalog link I inserted and clicks on "see more applications" for that part you get a list that includes this:


1984 Volvo 760 V6 (Engine: B28)
1983 Volvo 760 V6 (Engine: B28)

I want to call it an exact match, something beyond a x-reference part. Still looking for any pros who can check that.

So, yes, as you say I still don't know for sure that this part is "our" part.

What's more I do not know if the particular parts supplier listed really has any new ones. You know how it can be on the 'net. But there could be others.

sdg3205
02-24-2014, 05:09 PM
Agree, and we'll see if the FV cross-referenced parts supply is any good, the one I queued up a few posts back.

If one opens up the first parts catalog link I inserted and clicks on "see more applications" for that part you get a list that includes this:


1984 Volvo 760 V6 (Engine: B28)
1983 Volvo 760 V6 (Engine: B28)

I want to call it an exact match, something beyond a x-reference part. Still looking for any pros who can check that.

So, yes, as you say I still don't know for sure that this part is "our" part.

What's more I do not know if the particular parts supplier listed really has any new ones. You know how it can be on the 'net. But there could be others.

When I buy engine parts from Napa and other similar auto parts stores, I always use a 1984 volvo 760 GLE, because they actually stock parts for it. So far the parts have worked fine.

I'll call up Napa now and see if they have one.

DMCVegas
02-24-2014, 05:09 PM
Gotta say, it makes me a little nervous when engine parts are no longer available (brand new). Knee pads and coin trays don't bother me. Vital engine pieces do.

Again, we'll find a way. You'd be in a far worse situation with a 2 year old SAAB than a 30+ year old DeLorean right now. Trust me.

David T
02-24-2014, 05:12 PM
Agree, and we'll see if the FV cross-referenced parts supply is any good, the one I queued up a few posts back.

If one opens up the first parts catalog link I inserted and clicks on "see more applications" for that part you get a list that includes this:


1984 Volvo 760 V6 (Engine: B28)
1983 Volvo 760 V6 (Engine: B28)

I want to call it an exact match, something beyond a x-reference part. Still looking for any pros who can check that.

So, yes, as you say I still don't know for sure that this part is "our" part.

What's more I do not know if the particular parts supplier listed really has any new ones. You know how it can be on the 'net. But there could be others.

It may be, in the case of the frequency valve, a X-over can be used but you might have to make up an adapter fitting to make it work with our existing hoses and connectors. Those p/n's on all of the Bosch parts are VERY application specific as to mounting, flow and pressure. The good news as far as the frequency valve is concerned, is that they rarely go bad. If you are resurrecting a dead car you may have to replace one or if it got damaged because of fire. Maybe we should cheer on all of those who want to go to carbs or EFI so we could get some more used K-Jet parts? I would not despair about the parts problem. The venders who service the cars will see it first and since they can only make money if they can fix up a car and make it run, they will HAVE to find parts to keep them going, it is their livelihood!

sdg3205
02-24-2014, 05:31 PM
There are a ton of these on ebay at the moment, but some for more than double what DMCH charges (http://store.delorean.com/p-6612-control-pressure-regulator-warm-up-regulator.aspx).

Here's a well priced unit . (http://www.ebay.com/itm/NEW-Remanufactured-BOSCH-Fuel-Injection-Warm-Up-Regulator-AUDI-VW-0438140094/191062077689?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%2 6asc%3D261%26meid%3D5070170548034834269%26pid%3D10 0005%26prg%3D1088%26rk%3D2%26rkt%3D5%26sd%3D190805 256627%26) Can a vendor confirm this WUR is a crossover for a DeLorean? I see no visible difference and the services years certainly overlap.

EDIT - you can see some WUR's clearly lack the breathing/vacuum nipples ours use.

DMCVegas
02-24-2014, 06:02 PM
There are a ton of these on ebay at the moment, but some for more than double what DMCH charges (http://store.delorean.com/p-6612-control-pressure-regulator-warm-up-regulator.aspx).

Here's a well priced unit . (http://www.ebay.com/itm/NEW-Remanufactured-BOSCH-Fuel-Injection-Warm-Up-Regulator-AUDI-VW-0438140094/191062077689?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%2 6asc%3D261%26meid%3D5070170548034834269%26pid%3D10 0005%26prg%3D1088%26rk%3D2%26rkt%3D5%26sd%3D190805 256627%26) Can a vendor confirm this WUR is a crossover for a DeLorean? I see no visible difference and the services years certainly overlap.

EDIT - you can see some WUR's clearly lack the breathing/vacuum nipples ours use.

I've seen a CIS gasoline injector cleaner by BOSCH that because it came in a Ferrari box was $800! Flow rate testers are over $3,000 as well for the same reason. I'm glad I got my PRV tool sets before, but should have snagged those CIS ones back in the 90's when no one wanted them.

Still though the tools are simple enough to build on your own out in the garage. Build a popper out of a Bottle Jack, and then connect it up to a spaghetti sauce jar to clean it/check spray pattern. Get a couple of Test Tube racks to place on either side of the engine and fire the injectors into them after you trip the RPM relay and you can then check flow rates to ensure that your system is working equally.

AugustneverEnds
02-27-2014, 09:59 AM
It looks as though the center console change trays cannot be purchased either.

I'm on the lookout for one if anyone know where to find it.

AugustneverEnds
02-27-2014, 10:01 AM
With Josh's predictions on the inevitable death of K-jet due to NLA components, I thought it would be neat to have a thread dedicated to those (parts) we've lost over the years, or parts we're on the verge of loosing completely. We can also discuss ideas as to obtaining said parts from other sources, or creating new ones, etc. These would be parts that don't necessarily have a clear "cross over" list alternative like a belt, oil filter etc.

Here goes:

- the holy grail: Left front fender
- frames
- OEM clock (several alternatives out there - SAOT)
- OEM shift knob (SAOT)
- Binnacles (recovers available, or Steve's fiberglass builds)
- seat backs
- rear engine cover latch
- centre consoles
- centre console arm rests
- Rh escutcheon
- matching OEM tire sizes
- LH torsion bar (Byrne sells an alternative)
- LCA's (DPI and Byrne sell alternatives)
- roof box/engine cover latch closing plates - these things are still available, but so rare their prices are insane (http://store.delorean.com/p-9652-access-panel.aspx).
- LH rear trim panels (in both grey and black) are non existant.
- seat slide bar components
- seat tilt mechanism & black plastic shield trim
- rear fascia closing panel

… more will come to me.

Not to question Josh but it's hard to believe K-Jet could die soon since it was used on millions of cars... :hmm:

Delorean Industries
02-27-2014, 12:31 PM
You will always be able to hack solutions with other k jet components. We are moving away from this at an accelerated rate providing reliable modern options while retaining appearance to a degree. If you go by the dmch website you will note 0.00 on many products. Just to name a few including key fuel components:

frequency valve: DPI has NOS in stock
smaller ac idler: DPI has reproduced
large ac idler: DPI has reproduced
105177SS lower control arms: DPI has reproduced
105845 compressor hose bracket: DPI has reproduced
106960 clamp spacer: DPI has reproduced
106341 MOUNTING BRACKET LH: DPI has reproduced
106342 MOUNTING BRACKET RH: DPI has reproduced


So with that said we have a proven track record of innovating solutions when the time comes. Will DPI step in even though it is not financially viable to retain K jet. Most likely yes. But it isn't to that point yet and we will push for more modern solutions first.

DMCVegas
02-27-2014, 02:55 PM
Not to question Josh but it's hard to believe K-Jet could die soon since it was used on millions of cars... :hmm:

A few years ago I hear a rumor that BOSCH was looking to cease the K-Jetronic line entirely, but the resurgence of the DMC-12 and DMCH and other vendors placing orders for components put their plans on hold.

In the grand scheme of things, it's been almost 20 years since a car came equipped with a BOSCH CIS injection system, and the hey-day of it is closer to about 25-30 years ago since digital fuel injection surpassed it. Of those cars, the real question would be how many are still on the road? Stateside here (I can't speak for Europe, but someone please chime in) of the Volvos and other cars that were popular, most quickly moved on to L-Jetronic, LH, and abandoned CIS a long time ago.

In any case it would be of great benefit if someone could go on the record as stating with proof that the K-Jet system is on it's way out for those of us like myself that just walked into this.

If K-Jetronic does become increasingly hard to find, I would suspect that if nothing else it would most likely benefit the community as a whole. Someone will find a way to keep the DMC-12s on the road. Be it a conversion system to EFI for the PRV, or an outright replacement of the engine itself. In either case a trailer queen's value would certainly increase as the vehicle would finally have some rare, vital parts to boast about. A conversion that becomes a standard practice would also increase the value of a daily driver as now it comes with a fuel injection system that doesn't have the undeserved legacy of K-Jetronic. The ones that would suffer would be DeLoreans with original K-Jet systems that aren't preserved examples. The selling price of those vehicles would certainly go down until a conversion took place, or they were painstakingly restored (more expensive of an option). But all in all it would work out just fine.

Jonathan
02-27-2014, 04:07 PM
Like the technology comment a few pages ago, it always amazes me to see how well we can adapt when life throws us a curveball one way or another.

It's not the easiest thing in the world to predict what may or may not be available in the future, but I have confidence in there being a good solution when that day or need comes.

It seems as though the things you were very well prepared for in advance pale in comparison to the things you never saw coming. As Robert and others said, until you know for certain what is coming, take the opportunity to enjoy the present and what we can do today.

Or... take off the Mr. Doomsday hat and put the Mr. Oblivious hat on instead... it can be much more enjoyable some times :)

kenny
02-27-2014, 06:10 PM
K jet was used by Porsche for 20 years on the 911, 924 and 928s
VW used it on the mk1 and mk2 golf gti as well as other models that had fuel injection.
Mercedes 190 cosworth
early 10v Audi ur quattros
Some BMWs, Ferraris etc
In Europe these are hugely popular cars and because of this demand I can't see k jet disappearing for a long time.
How many of these k jet parts can be used as crossover parts on a delorean I don't know

Totally 80s
02-28-2014, 12:55 AM
Can there really be a simple plug and play EFI built for the Delorean?

Every EFI build I have heard of takes months of tweaking to get it to run right. And these are installs done by guys who really know their stuff.

Seems to me a solid carb would be the more logical direction if K-Jet was to die. Much much simpler to install and dial in. If I am not mistaken the PRV in our cars was originally designed for a carb.

AugustneverEnds
02-28-2014, 08:52 AM
You will always be able to hack solutions with other k jet components. We are moving away from this at an accelerated rate providing reliable modern options while retaining appearance to a degree. If you go by the dmch website you will note 0.00 on many products. Just to name a few including key fuel components:

frequency valve: DPI has NOS in stock
smaller ac idler: DPI has reproduced
large ac idler: DPI has reproduced
105177SS lower control arms: DPI has reproduced
105845 compressor hose bracket: DPI has reproduced
106960 clamp spacer: DPI has reproduced
106341 MOUNTING BRACKET LH: DPI has reproduced
106342 MOUNTING BRACKET RH: DPI has reproduced


So with that said we have a proven track record of innovating solutions when the time comes. Will DPI step in even though it is not financially viable to retain K jet. Most likely yes. But it isn't to that point yet and we will push for more modern solutions first.

Bravo!!! I should have known better, of course you are thinking far ahead, glad you are :thumbup2:

Totally 80s
02-28-2014, 11:18 AM
Josh, how much is one of your NOS Frequency valves? I could not find it on your website.

DMCVegas
02-28-2014, 04:23 PM
K jet was used by Porsche for 20 years on the 911, 924 and 928s
VW used it on the mk1 and mk2 golf gti as well as other models that had fuel injection.
Mercedes 190 cosworth
early 10v Audi ur quattros
Some BMWs, Ferraris etc
In Europe these are hugely popular cars and because of this demand I can't see k jet disappearing for a long time.
How many of these k jet parts can be used as crossover parts on a delorean I don't know

K-Jetronic components vary between vehicles due to both engines and applications, so you can't just bolt stuff on. Ie. The flow rate and pressure at which you finally get an injector to open for example. I'm sure that something could be pieced together with similar injectors and a new spring for the Primary Pressure regulator, but that's assuming we'd even have some sort of apocalyptic shortage of K-Jetronic parts.



Can there really be a simple plug and play EFI built for the Delorean?

Every EFI build I have heard of takes months of tweaking to get it to run right. And these are installs done by guys who really know their stuff.

Seems to me a solid carb would be the more logical direction if K-Jet was to die. Much much simpler to install and dial in. If I am not mistaken the PRV in our cars was originally designed for a carb.

Warning: Long post ahead...

Be it Carburetion, Mechanical Fuel Injection, or Electronic Fuel Injection, each of these fuel delivery systems are custom configured to work with a particular engine. Specificly what I'm speaking of is what's called a Fuel Map. A fuel map determines how much fuel needs to be delivered to each combustion chamber dependent upon the condition of the engine. Including, but not limited to, nor all encompassing of: Engine RPM, Load, Temperature, vehicle speed, etc. Carburetors do this with floats, mixture screws, and jets based upon engine vacuum. K-Jetronic as mentioned above does this with Injector Size and Pressure regulations again based upon engine vacuum and. Both methods though also use thermal probes to enrich fuel mixtures when cold for cranking. And finally EFI does this based upon air flow, engine speed, throttle position, oxygen content in exhaust gasses, air and engine temp telling the injectors how many times a second to spray fuel. The differences here though are with the mechanical carburetor and the CIS K-Jet systems, the Fuel Map is adhered to by way of physical tolerances of components. An EFI system actually has a whole chart with all of the inputs from each sensor representing a mathematical value which creates an equation. The answer to said equation becomes a value that the EFI computer interprets as how much fuel it needs to inject at that very moment. Again, EFI has a big chart it constantly references, where carbs and CIS simply have mechanical tolerances and control systems that do the exact same thing.

The EFI tuning that you've read about with the Mega Squire EFI systems on the PRV is because these are DYI kits that require the user to create a Fuel Map. Make no mistake though, if someone creates the perfect map and then shared it, you wouldn't have to go through that hassle of tuning at all. You'd just install the system, load the Fuel Map into the Engine Computer (or ECU), and then just turn the key and go. As an example, for years Chrysler has made an upgrade kit for Jeeps to convert them from carbs to EFI. All you had to do was install the new fuel pump, run a fuel hose, mount the ECU, install the new manifold with injectors, install an Oxygen Sensor, and then just plug everything in with the included wiring kit. The ECU already had the Fuel Map loaded, so as soon as you were done you'd just turn the key and go. MSD is already doing this with their Atomic EFI kit for classic muscle cars.

Likewise you can't just bolt a carb on and go. You actually do need to tune it with a device of some sort to analyze the exhaust gas. Then you've got to figure out jet size, tune it for idle, & fast idle too. With any fuel system: Too much gasoline and you'll wash the cylinders out as the raw fuel washes off the oil film on the walls of the combustion chamber and the pistons will scrape and score the engine. Too little gas and you'll shoot your Nitrous Oxide levels up (meaning failed emissions and acid rain), and you wind up with really hot combustion chamber temperatures that will damage your engine. So no, despite what someone tells you, you cannot tune an engine solely by ear with a carb.

Carburetors really are not a viable option for everyone. The reasons are local legal regulations. Many states now will exempt vehicles once they reach a certain age. However, many others simply do not. In California & Nevada, you still have to emission test your vehicle, and you also have to have the vehicles emissions control systems in place. In California for example you can install a newer engine in an older vehicle, but not vice-versa. And you can't go backwards in fuel emissions technology which a carb certainly does. If something bad were to happen where the whole community would need to retrofit something, we'd need to have a 50-state legal solution we can all use.

David T
02-28-2014, 04:44 PM
If things get so bad that K-Jet can no longer be supported, one of the venders will make up a kit for EFI. If that happens then the fuel map will be done and that is where the big work is. Of course they will offer a full bolt-on kit but it will cost more than if you piece it together and can get your hands on the firmware. Kind of the way they are selling the Stage II. In fact, it may be called Stage III! The point here is if a certain part is difficult to get and/or it gets too expensive alternate solutions WILL be found. No one part is going to prevent Deloreans from being on the road. If that should happen ALL of the venders will be out of business because A) They can no longer repair them and B) If you can't drive your car you will no longer be buying parts for it. This has not happened on ANY kind of car I know of. In the very worst case parts are custom made. Happens all the time in other Orphan Marques. BTW, no one said going EFI will future-proof anything. In time even that solution may not work. Take the possibility of Mega-Squirt going out of business for instance.

DeLorean03
02-28-2014, 06:09 PM
Can there really be a simple plug and play EFI built for the Delorean?

Every EFI build I have heard of takes months of tweaking to get it to run right. And these are installs done by guys who really know their stuff.

Seems to me a solid carb would be the more logical direction if K-Jet was to die. Much much simpler to install and dial in. If I am not mistaken the PRV in our cars was originally designed for a carb.

Eddie Ghesquiere has done it to 2 cars - nearly 3 - since Nov 2013.

IMHO, he has proven it can be done. It may not be a plug-n-play job that you can unpack from the box and have installed on your DeLorean in x < 2-3 hours, but he has done it to 3 cars: my VR6 engine car, Sherry's EFI stock engine car, and Samuel's EFI with turbo car.

DMCVegas
02-28-2014, 06:51 PM
If things get so bad that K-Jet can no longer be supported, one of the venders will make up a kit for EFI. If that happens then the fuel map will be done and that is where the big work is. Of course they will offer a full bolt-on kit but it will cost more than if you piece it together and can get your hands on the firmware. Kind of the way they are selling the Stage II. In fact, it may be called Stage III! The point here is if a certain part is difficult to get and/or it gets too expensive alternate solutions WILL be found. No one part is going to prevent Deloreans from being on the road. If that should happen ALL of the venders will be out of business because A) They can no longer repair them and B) If you can't drive your car you will no longer be buying parts for it. This has not happened on ANY kind of car I know of. In the very worst case parts are custom made. Happens all the time in other Orphan Marques. BTW, no one said going EFI will future-proof anything. In time even that solution may not work. Take the possibility of Mega-Squirt going out of business for instance.

Agreed. The Fuel Map is the key. The problem however within the community is ego. Years ago when there was an effort to create a new workshop manual based upon online contributions to the DML, all I asked for was credit for the work that I and others put in. And that essentially killed that project because no one wanted to share. Later on when I asked for the details of the Legend engine, specifically the passage sizes to achieve the correct vacuum bleed to control the waste gates, I was denied the information. I was told that it wouldn't be right for me to possess such information for free since I didn't put the research work in to obtain it. When I first approached Bill about a carb conversion process for the DMC-12 I told him that I wanted to create a standardized process for future owners to establish carbs as a trusted and accepted modification instead of a one-off so that people wouldn't need to rely upon him. And that is when we split ways and he became confrontational because I wanted to cut him out of the conversion process to make it a true community effort so that he wouldn't monopolize it.

I believe that for the sake and future of the marque we need such information to be Open Source. Mega Squirt is something that has since surpassed it's creator and now belongs to the people. Schematics and all. As such we'll always have a support community beyond DeLoreans for it. However that Fuel Map is key. It should be kept open source. Start with the factory NA engines. From there people should be allowed to fork it for higher compression, turbos, etc. as long as it comes with the public domain license that no one profits from it other than to recouped distribution costs. But good luck with that dream...

Spittybug
02-28-2014, 09:20 PM
EFI kit? No problem.

Machined fuel rails
Replacement idle air block & controller (actually, there are ways to keep your existing WUR)
Mounting brackets
Fuel fittings & hose
6 Injectors
MS unit
Wide band O2
2 Relays, a few fuses
Intake air sensor
Throttle position sensor - hardest part with stock setup, but some have done it. Not mandatory for MS in any case.

The key is in the preparation, the willingness to learn and the fuel mapping as DMCVegas points out.

steve
02-28-2014, 09:35 PM
I am new here but put it together and sell it I'm ready.
My D 20069 looks beautiful with re-built engine ported heads.
Headers and K jet????????? If I can't get it going I will not spend
$ 1K for parts.

Steve about 2 weeks away from fire up.

David T
02-28-2014, 10:02 PM
I am new here but put it together and sell it I'm ready.
My D 20069 looks beautiful with re-built engine ported heads.
Headers and K jet????????? If I can't get it going I will not spend
$ 1K for parts.

Steve about 2 weeks away from fire up.

As pointed out doing the fuel map is a BIG deal. It can take a LOT of time and trial and error. Anyone doing that is going to want some kind of compensation/reimbursement/acknowledgment etc. Once the fuel map gets out anyone can copy it. DMCH has a similar problem with their Stage II. They put a lot of work into it and want to sell a whole motor, not some parts that once you can figure out what they are you can get on your own. Going backwards technologically (carburetor) is not a good answer either since, as pointed out, in many States you could not pass emissions testing. EFI will be the way to go but there would have to be a big reason to make that investment of time and money. The vendors all have programs to do this kind of thing but they have to worry about the most current problems, not ones that are way off into the future. Collaborative solutions are hard to come by, as pointed out by just trying to update some documentation.

StainlessBullet
03-01-2014, 01:07 AM
This thread made me curious. So last night I started looking at current prices on different parts that DMCH offers. Then I went to http://archive.org/web/ and started looking at the same parts, but what price tag they had in 2012. I figured the parts with the bigger price jump are the parts that are thinning out in the inventory or becoming rare. Take for instance NOS light kits. Are they becoming rare? I noticed that the Light/Lens kit DMCH offers went from being $295.00 at the end of 2012 to $509.11 in 2013. That's a price jump of $214.11 in less than a year.

This may not be a correct assumption, but an interesting thought anyway.